similar to: AVM B1 and PTP mode

Hi * Fans, I have some fritz cards now, followed instructions from stuart hirsts email of Jun 28: -> Thanks for your info but I think I have it working at last. Below are the steps I took which might help others. 1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware 2) Download the Chan_capi from http://www.junghanns.net/asterisk/ 3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which

Hi all! After much struggling I got my *@home working fine AND making use of two AVMFritz!PCI cards. Really nice ! (kernel 2.4.2x) There's however a silly glitch that's getting on my nerves, and, kind of a newbie that I am to linux, it should be easy to get help : -- "capiinit start" MUST BE run before Asterisk. (any other way makes * not to start because chan_capi

Hello all, I'm trying to setup a AVM C2 card. I have read the kernel requirements for this card. <M> CAPI2.0 support [*] Verbose reason code reporting (Kernel size +=7K) [*] CAPI2.0 Middleware support (EXPERIMENTAL) <M> CAPI2.0 /dev/capi support [*] CAPI2.0 filesystem support <M> CAPI2.0 capidrv interface support My problem is when I make a "make

Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat 8.0 system with *. If so could someone give me some pointers on getting the right sequence of installing the drivers and which versions to use. Thanks, Stuart -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I will use CentOS 4.4 and Hylafax to build an fax server. But when call /sbin/capiinit I only get the error: ERROR: cannot load module kernelcapi I have build and install the kernel module for my friz card. What must I do to get this working? Frank -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 5766

HI all, Has anyone succesfully installed an AVM Fritz! card on Fedora 7 using the drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/ I tried with a clean F7 build on my EPIA 5000 yesterday, after modifying /etc/capi.conf (removing the coment # in front of fcpci line) I received the following error when executing 'capiinit' - FATAL: Error inserting fcpci

Hello List! I have this "simple" problem: fileserver:/usr/src# capiinit start modprobe: Can't locate module kernelcapi ERROR: cannot load module kernelcapi Although, i think i hav everything build in, and loaded: ~# grep -i capi linux-2.4.27/.config CONFIG_ISDN_CAPI=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=y CONFIG_ISDN_CAPI_CAPIFS_BOOL=y

Hi, I am using a Netjet-s ISDN Card, and am having some trouble dialling out (Incoming Works Fine). TRUNK=Modem/ttyI0 exten => _90XXXXXXXXX,1,Dial(${TRUNK}/${EXTEN:1}||Ttm) exten => _90XXXXXXXXX,2,Congestion I get the following when diallingout: -- Starting simple switch on 'Zap/2-1' -- Executing Dial("Zap/2-1", "Modem/ttyI0/04XXXXXXXX||Ttm") in new

Hello, I have problem with capi, I can't install it. I have putted all info what I did and what I get :). I think you can suggest me how to solve this problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI v2.1and I want to install it to my ubuntu box (kernel: 2.6.17-10-server). Using command "lspci -vv" , I can see that kernel finds this card: *02:0d.0 Network

Can anyone suggest where I might begin looking for an answer please? I have just installed a TDM400P (2x FXS and 1x FXO modules installed) The first problem is that it does not seem to be able to detect if the remote party has hung up when a call comes through on the FXO. For example, if someone calls in, and then hangs up at any time after it starts ringing, Asterisk carries on as though the

Hi all ! We have 3 NTBAs which are all going to our existing PBX. Our areacode is 06003 and our DDI enabled number 9141. I want to exchange that PBX with Asterisk, but still struggle to get it working. My CAPI.CONF is currently like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.800000 txgain=0.800000 [interfaces] context=in-capi msn=60039141 incomingmsn=* controller=1

Same problem here: if call come over ISDN PRI and it is for a SIP phone that equals to strong echo situation, at the SIP end. Interestingly this doesn't happen on all calls but it does on 95% of them. Asterisk load at that moment is insignificant - 1 to 2 calls. I have tried with all possible echo cancellers in zconfig.h, with and without MMX, and with and without CFLAGS+=-march=i686 in

Hi, I successfully installed 2 avm card in my asterisk box but I'm unable to make call. My capi.conf is: msn=0721111,07211115 incomingmsn=* controller=1,2 softdtmf=1 context=default echocancel=yes callgroup=1 devices=2,2 my capi info : Contr1: 2 B channels total, 2 B channels free. Contr2: 2 B channels total, 2 B channels free. my extensions.conf : exten =>

PXE-On-A-Disk from (ftp://ftp.scyld.com/private/jlehan/pxe-on-a-disk.html) was posted on syslinux mailing list: http://syslinux.zytor.com/archives/2005-December/006222.html. It is being mentioned by syslinux wiki, or some other documentation of syslinux that I currently can't find. I tried etherboot2ethersel.pl from PXE-On-A-Disk (ftp://ftp.scyld.com/private/jlehan/pxe-on-a-disk.html)

Hi all, i'm tryinf to install chan_capi but i get this error root@obelix:/usr/src/chan_capi-0.3.5# make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i586 -DNEVER_EVER_EARLY_B3_CONNECTS -DCAPI_ES -DCAPI_GAIN -DDEFLECT_ON_CIRCUITBUSY -DCAPI_SYNC -DUNSTABLE_CVS -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Not strictly Asterisk related, but I'm trying to get an AVM Fritz! card to work with Asterisk on a Fedora Core 3 box. I've grabbed the official AVM Fritz CAPI driver from the AVM website and compiled against the current kernel. However, as soon as I modprobe it I get: CAPI Subsystem Rev 1.1.2.8 fcpci: module license 'Proprietary'

From: Vivek Thampi <vithampi at vmware.com> Date: Fri, 28 Feb 2020 05:32:46 +0000 > Add a PTP clock driver called ptp_vmw, for guests running on VMware ESXi > hypervisor. The driver attaches to a VMware virtual device called > "precision clock" that provides a mechanism for querying host system time. > Similar to existing virtual PTP clock drivers (e.g. ptp_kvm),

From: Vivek Thampi <vithampi at vmware.com> Date: Fri, 28 Feb 2020 05:32:46 +0000 > Add a PTP clock driver called ptp_vmw, for guests running on VMware ESXi > hypervisor. The driver attaches to a VMware virtual device called > "precision clock" that provides a mechanism for querying host system time. > Similar to existing virtual PTP clock drivers (e.g. ptp_kvm),

Hi all, I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :) I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway ISDN line. I'm pretty certain the card and line both work since they've been used in this machine for PPP before this (but with an older kernel with DoV

Hello: I am working through the 2nd Edition of the agile book (after watching the first edition age on my shelf for 6 months), and am having a problem with the newly created ''store'' I''ve checked the files and fucntions that I''ve written, namely: model/product find_products_for_sale controller/store index views/store/index.rhtml and they all seem to have