search for: capiinit

Hi all! After much struggling I got my *@home working fine AND making use of two AVMFritz!PCI cards. Really nice ! (kernel 2.4.2x) There's however a silly glitch that's getting on my nerves, and, kind of a newbie that I am to linux, it should be easy to get help : -- "capiinit start" MUST BE run before Asterisk. (any other way makes * not to start because chan_capi doesn't find CAPI support) You must find this an easy thing, as I did. So I entered /etc/rc.d/ and inserted "capiinit start" to start as early as possible. Also added some lines of junk tex...

Hi ! I've fetched a spare AVM B1 card from the cellar, and installed it. After "modprobe b1pci" I did "capiinit" and capiinit moaned about a missing t1.b4. So I search the web and found one at http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the controller, I finally see p2p-mode: # cat /proc/capi/controllers/1 name b1pciv4-a400 io 0xa400 irq...

...; CAPI2.0 /dev/capi support [*] CAPI2.0 filesystem support <M> CAPI2.0 capidrv interface support My problem is when I make a "make menuconfig" in /usr/src/linux/, i can't see any reference to CAPI2.0 filesystem support, in my kernel, 2.4.18 (Debian stable). When I make a capiinit, to test the AVM card, it says, debian-asterisk:~# capiinit modprobe: Can't locate module capifs modprobe: Can't locate module capifs WARNING: filesystem capifs not available /lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: init_module: No such device Hint: insmod errors can be caus...

...igured /etc/capi.conf " i googled around for a suitable firmware (c4.bin) but the only one i was able to find is this: ftp://ftp.in-berlin.de/pub/capi4linux/firmware/c4/3-11-04 i cannot say if this one is ok or something other should be found & installed then i apt-got capi utils to have capiinit and capiinfo; you need capiinit to install firmware; using my knwoledge, the only way to have /usr/lib/isdn/c4.bin is installling suse 9, but this is not my last wish at teh moment this is my /etc/isdn/capi.conf: c4 /usr/sbin/c4.bin DSS1 - - - - capiin...

...5524 0 (unused) keybdev 3140 0 (unused) input 5728 0 [mousedev keybdev] ext3 72896 2 jbd 61996 2 [ext3] I've edited /etc/capi.conf and write 'hisax_fcpcipnp - - - - - -' in it. Anyway, 'capiinit' failed (and so for 'capiinfo'): # capiinit ERROR: failed to load driver hisax_fcpcipnp # capiinfo capi not installed - No such device or address (6) Please, could you explain me how to make CAPI drivers speak with the hisax_fcpcipnp module ? Cheers.

...y installed an AVM Fritz! card on Fedora 7 using the drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/ I tried with a clean F7 build on my EPIA 5000 yesterday, after modifying /etc/capi.conf (removing the coment # in front of fcpci line) I received the following error when executing 'capiinit' - FATAL: Error inserting fcpci (/lib/modules/2.6.22.4-65.fc7/updates/drivers/isdn/fritz/fcpci.ko): Unknown symbol in module, or unknown parameter (see dmesg) ERROR: failed to load driver fcpci After some searcing I found this article - https://bugs.launchpad.net/ubuntu/+source/linux-restrict...

Hello, I will use CentOS 4.4 and Hylafax to build an fax server. But when call /sbin/capiinit I only get the error: ERROR: cannot load module kernelcapi I have build and install the kernel module for my friz card. What must I do to get this working? Frank -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size:...

Hello List! I have this "simple" problem: fileserver:/usr/src# capiinit start modprobe: Can't locate module kernelcapi ERROR: cannot load module kernelcapi Although, i think i hav everything build in, and loaded: ~# grep -i capi linux-2.4.27/.config CONFIG_ISDN_CAPI=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=y CONFIG_ISDN_CAPI_CAPIFS...

Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat 8.0 system with *. If so could someone give me some pointers on getting the right sequence of installing the drivers and which versions to use. Thanks, Stuart -------------- next part -------------- An HTML attachment was scrubbed... URL:

...itz-firmware-2.6.17-10 3.11+2.6.17.7-10.1 Firmware for AVM Fritz! ISDN hardware* and downloaded firmaware from * ftp://ftp.in-berlin.de/pub/capi4linux/firmware/b1/ .*My capi.conf is: *b1pci /usr/share/isdn/b1.t4 DSS1 - - - - P2P* Then I exec command capiinit start, I have noting on output, but it load modules: *root@asterisk:~# lsmod Module Size Used by b1pci 10624 0 b1dma 17412 1 b1pci b1 25856 2 b1pci,b1dma capi 19392 0 kernelcapi 49664 4 b1pci,...

...roblem appears to be related to incoming calls only. I'm based in the UK. Using RedHat 9 with zaptel-1.0.9.1, asterisk-1.0.9 (and chan_capi-0.5.4) Thanks in advance for any ideas. Faris. ***** Here's my initialisation script: modprobe zaptel modprobe wctdm opermode=UK /sbin/ztcfg -vvvv capiinit safe_asterisk zapata.conf [trunkgroups] ; nothing in here [channels] rxwink=300 ; (I tried commenting this out. Make no difference) usedistinctiveringdetection=no usecallerid=yes cidsignalling=v23 cidstart=polarity hidecallerid=no callwaiting=no usecallingpres=no sendcalleridafter=1 callwai...

...: "Asterisk Users Mailing List - Non-Commercial Discussion" > <asterisk-users@lists.digium.com> > Message-ID: <002e01c52634$07e94490$0a00a8c0@segurajuda.local> > Content-Type: text/plain; charset="iso-8859-1" > > Solved! > The problem was that "capiinit start" can only be done by user "root" and > asterisk is started as user "asterisk". > Once I edited sudo ("visudo") and gave permission, the problem was solved. > > Regards > > M.G. > > ----- Original Message ----- > From: "Junk M...

...ake error message. 5) run "make" 6) run "make install" 7) create a file /etc/capi.conf with the following line in it: fcpci - - - - - - 8) run "insmod -f fcpci". You will get errors about the version of GCC but it should still work 9) run "capiinit" 10) run "capiinfo" which should give output showing the card and supported features. 11) extract using tar -xvzf chan_capi.0.2.2.tar.gz 12) in the chan_capi-0.2.2 directory run "make" and "make install" and "make config" 13) edit /etc/asterisk/modules.c...

Hi, I am using a Netjet-s ISDN Card, and am having some trouble dialling out (Incoming Works Fine). TRUNK=Modem/ttyI0 exten => _90XXXXXXXXX,1,Dial(${TRUNK}/${EXTEN:1}||Ttm) exten => _90XXXXXXXXX,2,Congestion I get the following when diallingout: -- Starting simple switch on 'Zap/2-1' -- Executing Dial("Zap/2-1", "Modem/ttyI0/04XXXXXXXX||Ttm") in new

hello, got anybody succesfully setup asterisk with three avm fritz pci cards - using the howto described in http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO i already have asterisk working with 2 cards, by when i add third card and compile driver ( see capiinit debug below ) asterisk freeze on capi initialization.... does anybody know how to solve this ? regards Marian ------------------ Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capiutil.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/kernelcapi.o Using /lib/modules/2.4.20/kernel/driver...

If I do that, the modprobe doesn't find any module called fcpci and is looking for any module called hisax_fcpcipnp as it's the one install for the isdn fritz card. # capiinit modprobe: Can't locate module fcpci ERROR: failed to load driver fcpci Maybe, I should reinstall the fritz card drivers itselves? (however, I don't think so...)

...Kernel: 2.4.20-8 Asterisk: latest CVS head Hi all, I try to compile the latest chan_capi, but it won't work. I also tried the patch that is arround there from frank sautter and I have installed the asterisk header files. Asterisk is working very good :) and the Fritz AVM pc Card is running. capiinit: 1 fcpci running fritz-pci A1 3.11-02 0xbc00 5 lsmod: fcpci 587744 1 capi 20896 0 kernelcapi 33792 2 [fcpci capi] capiutil 24864 0 [kernelcapi] capifs 5420 1 [capi] Here is a little output whe...

Hi, I added a Fritz!PCI card to my asterisk system which is running on fc2 !. I installed the avm modules (fcpci) and when i try an capiinit and a capiinfo then everything seems to be OK (you can see capiinfo and lsmod at the end of the text) !. I installed the asterisk chan_capi module and when i start asterisk and enter the command capi info on the command line i get back: *CLI> capi info Contr1: 2 B channels total, 2 B channels...

Hi, I successfully installed 2 avm card in my asterisk box but I'm unable to make call. My capi.conf is: msn=0721111,07211115 incomingmsn=* controller=1,2 softdtmf=1 context=default echocancel=yes callgroup=1 devices=2,2 my capi info : Contr1: 2 B channels total, 2 B channels free. Contr2: 2 B channels total, 2 B channels free. my extensions.conf : exten =>

Hi all, i'm tryinf to install chan_capi but i get this error root@obelix:/usr/src/chan_capi-0.3.5# make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i586 -DNEVER_EVER_EARLY_B3_CONNECTS -DCAPI_ES -DCAPI_GAIN -DDEFLECT_ON_CIRCUITBUSY -DCAPI_SYNC -DUNSTABLE_CVS -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO