I use http://www.voip-info.org/wiki-Asterisk+callingcard
You only should compile the prepaid.c (look at readme file).
Regards.
Julio
----- Original Message -----
From: <clive18@webmail.co.za>
To: <juliom@telelinkusa.net>
Sent: Tuesday, April 20, 2004 12:47 AM
Subject: fwd:Re: [Asterisk-Users] Asterisk prepaid debug
> Hi
>
> Which pre-paid app are you using?.
> Is it the one on the wiki?
>
> Any pointers will be apprciated?.
>
> Thanks and Regards
> Clive
>
>
> On Mon, 19 Apr 2004 20:07:14 -0600
> "Julio" <juliom@telelinkusa.net> wrote:
> > My Asterisk prepaid debug is:
> >
> >
> > - Hungup 'Zap/2-1'
> > Urgent handler
> > -- Starting simple switch on 'Zap/2-1'
> > Urgent handler
> > -- Playing 'prepaid-enter-card-num' (language
'en')
> > Urgent handler
> > -- Playing 'prepaid-you-have' (language 'en')
> > Urgent handler
> > -- Playing 'digits/4' (language 'en')
> > Urgent handler
> > -- Playing 'digits/hundred' (language 'en')
> > Urgent handler
> > -- Playing 'prepaid-dollars' (language 'en')
> > Urgent handler
> > -- Playing 'prepaid-enter-dest' (language 'en')
> > Urgent handler
> > -- Playing 'prepaid-dest-blocked' (language 'en')
> > Urgent handler
> > -- Playing 'prepaid-dest-unreachable' (language
'en')
> >
> >
> > Why 'prepaid-dest-unreachable' ??????
> >
> > Thks.
> >
> > Regards
> >
> >
> >
> >
> >
> >
> > ----- Original Message -----
> > From: Martin Christian Koch
> > To: asterisk-users@lists.digium.com
> > Sent: Monday, April 19, 2004 4:05 PM
> > Subject: [Asterisk-Users] spandsp/rxfax terminates
> > asterisk
> >
> >
> > Initial handshake sounds fine, but asterisks dies
> > before receive of the fax. Here is the log :
> >
> >
> >
> > Changed from phase 0 to 1
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Start receiving document
> >
> > Changed from phase 1 to 4
> >
> > Sending ident
> >
> > >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> > 20 20 20 20 20 20
> >
> > DIS:
> >
> > Preferred octets: 256
> >
> > Can receive fax
> >
> > Supported data signalling rates: V.27ter and V.29
> >
> > R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >
> > 2D coding OK
> >
> > Scan line length: 215mm
> >
> > Recording length: A4 (297mm)
> >
> > Receiver's minimum scan line time: 0ms at 3.85 l/mm:
> > T7.7 = T3.85
> >
> > R8x15.4lines/mm OK
> >
> > Minimum scan line time for higher resolutions: T15.4 > > T7.7
> >
> > >>> DIS: 80 00 ce f0 80 80 01
> >
> > HDLC underflow in state 9
> >
> > Changed from phase 4 to 3
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > Slow carrier up
> >
> > Slow carrier down
> >
> > T4 timeout in state 9
> >
> > Changed from phase 3 to 4
> >
> > Sending ident
> >
> > >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> > 20 20 20 20 20 20
> >
> > DIS:
> >
> > Preferred octets: 256
> >
> > Can receive fax
> >
> > Supported data signalling rates: V.27ter and V.29
> >
> > R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >
> > 2D coding OK
> >
> > Scan line length: 215mm
> >
> > Recording length: A4 (297mm)
> >
> > Receiver's minimum scan line time: 0ms at 3.85 l/mm:
> > T7.7 = T3.85
> >
> > R8x15.4lines/mm OK
> >
> > Minimum scan line time for higher resolutions: T15.4 > > T7.7
> >
> > >>> DIS: 80 00 ce f0 80 80 01
> >
> > T2 timeout
> >
> > Start receiving document
> >
> > Sending ident
> >
> > >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> > 20 20 20 20 20 20
> >
> > DIS:
> >
> > Preferred octets: 256
> >
> > Can receive fax
> >
> > Supported data signalling rates: V.27ter and V.29
> >
> > R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >
> > 2D coding OK
> >
> > Scan line length: 215mm
> >
> > Recording length: A4 (297mm)
> >
> > Receiver's minimum scan line time: 0ms at 3.85 l/mm:
> > T7.7 = T3.85
> >
> > R8x15.4lines/mm OK
> >
> > Minimum scan line time for higher resolutions: T15.4 > > T7.7
> >
> > >>> DIS: 80 00 ce f0 80 80 01
> >
> > HDLC underflow in state 9
> >
> > Changed from phase 4 to 3
> >
> > Slow carrier up
> >
> > <<< TSI: 43 30 36 37 37 36 31 36 35 20 35 34 2b 20 20
> > 20 20 20 20 20 20
> >
> > TSI without final frame tag
> >
> > Remote fax gave TSI as: "+45 56167760"
> >
> > <<< DCS: 83 00 46 20
> >
> > DCS with final frame tag
> >
> > In state 9
> >
> > DCS:
> >
> > Can receive fax
> >
> > Selected data signalling rate: V.29, 9600bps
> >
> > R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >
> > Scan line length: 215mm
> >
> > Recording length: A4 (297mm)
> >
> > Minimum scan line time: 10ms
> >
> > Get at 9600
> >
> > Changed from phase 3 to 5
> >
> > Fast carrier up
> >
> > Fast carrier down
> >
> > Fast carrier up
> >
> > Coarse carrier frequency 1700.00 (64)
> >
> > Training error 29.095569
> >
> > Training succeeded (constellation mismatch 25.504344)
> >
> > Fast carrier trained
> >
> > Fast carrier down
> >
> > Changed from phase 5 to 4
> >
> > Start rx document - compression 1
> >
> > Start rx page
> >
> > asterisk in realloc(): warning: junk pointer, too high
> > to make sense
> >
> > Oh dear!
> >
> > >>> CFR: 84
> >
> > HDLC underflow in state 5
> >
> > Post trainability
> >
> > Changed from phase 4 to 5
> >
> > Fast carrier up
> >
> > Coarse carrier frequency 1700.04 (64)
> >
> > Training error 26.487284
> >
> > Training succeeded (constellation mismatch 27.123313)
> >
> > Fast carrier trained
> >
> > Segmentation fault (core dumped)
> >
> >
> >
> > Anyone ?
> >
> >
> >
> > Thanks,
> >
> > Martin
> >
> >
> >
> >
> --------------------------------------------------------------------------
----> > Min mail er beskyttet af SPAMfighter
> > 3174 spam mails er blokeret indtil videre.
> > Hent gratis SPAMfighter i dag!
>
> ______________________________________________________________
> Herbalife Independent Distributor http://www.healthiest.co.za