Your Modem should be compatibile with AOpen standard Voice Modems. If this
is true, using the modem to call with asterisk is EXTREMELY simple :)
/etc/asterisk/modem.conf:
[interfaces]
context=remote
; Modem Drivers to load
;
driver=aopen
;
; Default language
;
;language=en
;
; We can optionally override the auto detection. This is necessaryM
; particularly if asterisk does not know about our kind of modem.M
;
;type=autodetect
type=aopen
; We can strip a given number of digits on outgoing dialing, so, for
exampleM
; you can have it dial "8871042" when given "98871042".M
;
;stripmsd=1
;
; Type of dialing
;
dialtype=tone
;dialtype=pulse
mode=immediate
; List all devices we can use.
;
device => /dev/ttySx (use here the COM port which your modem is attached to)
Then, in extensions.conf:
exten => _N.,1,Dial,Modem/ttySx:${EXTEN}
Note that this is a VERY SMALL EXAMPLE. :-)
--
Stefano
----- Original Message -----
From: "Mike Diehl" <mdiehl@dominion.dyndns.org>
To: <asterisk-users@lists.digium.com>
Sent: Tuesday, April 29, 2003 9:56 AM
Subject: [Asterisk-Users] Voice Modem Support?
> I'm still playing with * at the moment. Just trying to figure out how
much it> can do.
>
> Anyway, it looks like * supports voice modems. So here come the obvious
> questions...
>
> How well does * support vmodems?
>
> How do I set * to use my vmodem for incoming calls?
>
> Has anyone gotten it to work?
>
> Thanx,
> Mike Diehl.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>