thr3ads.net - llvm dev - [llvm-dev] Stuck with instruction in tablegen [Jul 2018]

If this information is useful, please help other people find it:
Share via:

Michael Stellmann via llvm-dev

2018-Jul-10 04:32 UTC

[llvm-dev] Stuck with instruction in tablegen

Hi,

I'm trying to revive jacobly0's Z80 back-end (from 
https://github.com/jacobly0/llvm-z80) and build it with a current 
version of LLVM.

Apart from some interface changes, I'm stuck at building the tables. 
Specifically, the generation of the DAG instruction selector causes an 
assertion in the table generator:

     Assertion failed: Ops.size() >= NumSrcResults &&
"Didn't provide
enough results"

I tried to fix the problem by searched in the documentation and in other 
table sources, but to no avail. Even stepping through that code in the 
debugger (MatcherGen::EmitResultCode()) didn't help me to find the cause 
of the problem. The instruction tables description are quite unique in 
all the officially supported CPU models, I couldn't find any similar 
code that could help me figuring out what is going wrong.

So I isolated the table sources to a minimum of two simple 
base-instructions and attached these for reproduction of the problem 
(not sure if the attachment gets through).

The table generation is done with:

     llvm-tblgen -gen-dag-isel -I=<path-to-llvm-include> -o=out.inc Z80.td

The first instruction in Z80InstrInfo.td is a unary instruction, that 
does a rotate left of a byte in memory, resulting in the leftmost bit 
being placed in the Carry flag - and changing the memory contents at the 
pointer's address (in Z80: "RLC (HL)", I expect).
The table generation completes without errors with just this instruction 
(by commenting the last line in Z80InstrInfo.td).

The second one is a binary instruction, adding the contents of a pointer 
and a register, with results in register A and F (Z80: "ADD A,(HL)").

A is an 8-bit register. The Z80 ALU can only do 8 bit arithmetic with 
that register and another param. The two instructions don't seem to 
require a specific register for the address in the table class, so the 
RegisterInfo table is not defined so far in the minimized version

The problem is in Z80InstrInfo.td, in the following section of 
"BinOp8RF", which is used by the "defm" line that generates
the "add"
instruction pattern:

     multiclass BinOp8RF<Prefix prefix, bits<3> opcode, string
mnemonic,
                         bit compare = 0> {
       let isCompare = compare, Defs = [A, F], Uses = [A] in {
         def 8ap : I8 <prefix, {0b10, opcode, 0b110}, mnemonic, "\ta, 
$src", "",
                       (outs), (ins   ptr:$src),
                       [(set A, F,
                            (Z80add_flag
                                 A, (i8 (load   iPTR:$src))))]>;
       }
     }

and the parameters:

     def SDTBinOpRF  : SDTypeProfile<2, 2, [SDTCisInt<0>,
                                            SDTCisFlag<1>,
                                            SDTCisSameAs<2, 0>,
                                            SDTCisSameAs<3, 0>]>;

     def Z80add_flag      : SDNode<"Z80ISD::ADD",     SDTBinOpRF, 
[SDNPCommutative]>;


The unary instruction builds fine, which can be checked by commenting 
out the generation of the binary instruction in the last line of the 
attached Z80InstrInfo.td.

The log in Github indicates that this section was present for over a 
year, so I assume that it did work at some time in the past.

My attempts to fixing the instruction failed with other errors, pointing 
specifically to the specific problems I introduced with the change, e.g. 
parameter number mismatch or wrong type, so above (and attached) is the 
unmodified version.

Any help is appreciated!

Michael


-------------- next part --------------
A non-text attachment was scrubbed...
Name: Z80-min-instruction-table-assertion.zip
Type: application/octet-stream
Size: 3014 bytes
Desc: not available
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20180710/5990a313/attachment.obj>

Craig Topper via llvm-dev

2018-Jul-10 06:21 UTC

head link

[llvm-dev] Stuck with instruction in tablegen

To the best of my knowledge, having 2 explicit physical registers(in your
case A and F) in the output of an instruction isn't supported correctly by
tablegen and never has been. Maybe it previously appeared to work well
enough to pass build?

This is why X86 has the pattern commented out here and implements custom
handling in X86ISelDAGToDAG.cpp.

// EAX,EDX = EAX*GR32
let Defs = [EAX,EDX,EFLAGS], Uses = [EAX], hasSideEffects = 0 in
def MUL32r : I<0xF7, MRM4r, (outs),  (ins GR32:$src),
               "mul{l}\t$src",
               [/*(set EAX, EDX, EFLAGS, (X86umul_flag EAX, GR32:$src))*/]>,
               OpSize32, Sched<[WriteIMul]>;
// RAX,RDX = RAX*GR64
let Defs = [RAX,RDX,EFLAGS], Uses = [RAX], hasSideEffects = 0 indef MUL64r
: RI<0xF7, MRM4r, (outs), (ins GR64:$src),
                "mul{q}\t$src",
                [/*(set RAX, RDX, EFLAGS, (X86umul_flag RAX,
GR64:$src))*/]>,
                Sched<[WriteIMul64]>;


I vaguely recall trying to fix tablegen probably at least 5 years ago, but
didn't succeed. Looking back at the code now I can tell you the two places
in DAGISelMatcherGen.cpp that call HasOneImplicitDefWithKnownVT are
definitely unable to handle multiple implicit def destinations in a pattern.

~Craig


On Mon, Jul 9, 2018 at 9:30 PM Michael Stellmann via llvm-dev <
llvm-dev at lists.llvm.org> wrote:
> Hi,
>
> I'm trying to revive jacobly0's Z80 back-end (from
> https://github.com/jacobly0/llvm-z80) and build it with a current
> version of LLVM.
>
> Apart from some interface changes, I'm stuck at building the tables.
> Specifically, the generation of the DAG instruction selector causes an
> assertion in the table generator:
>
>      Assertion failed: Ops.size() >= NumSrcResults &&
"Didn't provide
> enough results"
>
> I tried to fix the problem by searched in the documentation and in other
> table sources, but to no avail. Even stepping through that code in the
> debugger (MatcherGen::EmitResultCode()) didn't help me to find the
cause
> of the problem. The instruction tables description are quite unique in
> all the officially supported CPU models, I couldn't find any similar
> code that could help me figuring out what is going wrong.
>
> So I isolated the table sources to a minimum of two simple
> base-instructions and attached these for reproduction of the problem
> (not sure if the attachment gets through).
>
> The table generation is done with:
>
>      llvm-tblgen -gen-dag-isel -I=<path-to-llvm-include> -o=out.inc
Z80.td
>
> The first instruction in Z80InstrInfo.td is a unary instruction, that
> does a rotate left of a byte in memory, resulting in the leftmost bit
> being placed in the Carry flag - and changing the memory contents at the
> pointer's address (in Z80: "RLC (HL)", I expect).
> The table generation completes without errors with just this instruction
> (by commenting the last line in Z80InstrInfo.td).
>
> The second one is a binary instruction, adding the contents of a pointer
> and a register, with results in register A and F (Z80: "ADD
A,(HL)").
>
> A is an 8-bit register. The Z80 ALU can only do 8 bit arithmetic with
> that register and another param. The two instructions don't seem to
> require a specific register for the address in the table class, so the
> RegisterInfo table is not defined so far in the minimized version
>
> The problem is in Z80InstrInfo.td, in the following section of
> "BinOp8RF", which is used by the "defm" line that
generates the "add"
> instruction pattern:
>
>      multiclass BinOp8RF<Prefix prefix, bits<3> opcode, string
mnemonic,
>                          bit compare = 0> {
>        let isCompare = compare, Defs = [A, F], Uses = [A] in {
>          def 8ap : I8 <prefix, {0b10, opcode, 0b110}, mnemonic,
"\ta,
> $src", "",
>                        (outs), (ins   ptr:$src),
>                        [(set A, F,
>                             (Z80add_flag
>                                  A, (i8 (load   iPTR:$src))))]>;
>        }
>      }
>
> and the parameters:
>
>      def SDTBinOpRF  : SDTypeProfile<2, 2, [SDTCisInt<0>,
>                                             SDTCisFlag<1>,
>                                             SDTCisSameAs<2, 0>,
>                                             SDTCisSameAs<3, 0>]>;
>
>      def Z80add_flag      : SDNode<"Z80ISD::ADD",    
SDTBinOpRF,
> [SDNPCommutative]>;
>
>
> The unary instruction builds fine, which can be checked by commenting
> out the generation of the binary instruction in the last line of the
> attached Z80InstrInfo.td.
>
> The log in Github indicates that this section was present for over a
> year, so I assume that it did work at some time in the past.
>
> My attempts to fixing the instruction failed with other errors, pointing
> specifically to the specific problems I introduced with the change, e.g.
> parameter number mismatch or wrong type, so above (and attached) is the
> unmodified version.
>
> Any help is appreciated!
>
> Michael
>
>
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20180709/e298037d/attachment.html>

Michael Stellmann via llvm-dev

2018-Jul-10 07:17 UTC

head link

[llvm-dev] Stuck with instruction in tablegen

<html><head></head><body><div
style="font-family: Verdana;font-size: 12.0px;"><div>
<div>Thanks Craig for your quick reply and pointing me to a
direction!</div>

<div> </div>

<div>So even when finding a syntax that tablegen would accept, it would
not lead to the desired result.</div>

<div> </div>

<div>Will look at the X86 code you mentioned below and try to understand
how it's done.</div>

<div> </div>

<div>Although the X86 seems to be the "closest" to the Z80
regarding the instruction set (and, as far as I can see, the only officially
supported CISC CPU), it seems also to be the most complex backend to get started
with. But I'm commited ;-)</div>

<div> </div>

<div>Michael</div>

<div> 
<div name="quote" style="margin:10px 5px 5px 10px; padding:
10px 0 10px 10px; border-left:2px solid #C3D9E5; word-wrap: break-word;
-webkit-nbsp-mode: space; -webkit-line-break: after-white-space;">
<div style="margin:0 0 10px 0;"><b>Gesendet:</b>
Dienstag, 10. Juli 2018 um 08:21 Uhr<br/>
<b>Von:</b> "Craig Topper"
<craig.topper@gmail.com><br/>
<b>An:</b> Michael.Stellmann@gmx.net<br/>
<b>Cc:</b> llvm-dev <llvm-dev@lists.llvm.org><br/>
<b>Betreff:</b> Re: [llvm-dev] Stuck with instruction in
tablegen</div>

<div name="quoted-content">
<div>To the best of my knowledge, having 2 explicit physical registers(in
your case A and F) in the output of an instruction isn't supported correctly
by tablegen and never has been. Maybe it previously appeared to work well enough
to pass build?
<div> </div>

<div>This is why X86 has the pattern commented out here and implements
custom handling in X86ISelDAGToDAG.cpp.
<div> </div>

<div>
<div>// EAX,EDX = EAX*GR32</div>

<div>let Defs = [EAX,EDX,EFLAGS], Uses = [EAX], hasSideEffects = 0
in</div>

<div>def MUL32r : I<0xF7, MRM4r, (outs),  (ins GR32:$src),</div>

<div>               "mul{l}\t$src",</div>

<div>               [/*(set EAX, EDX, EFLAGS, (X86umul_flag EAX,
GR32:$src))*/]>,</div>

<div>               OpSize32, Sched<[WriteIMul]>;</div>

<div>// RAX,RDX = RAX*GR64</div>

<div>let Defs = [RAX,RDX,EFLAGS], Uses = [RAX], hasSideEffects = 0 indef
MUL64r : RI<0xF7, MRM4r, (outs), (ins GR64:$src),</div>

<div>                "mul{q}\t$src",</div>

<div>                [/*(set RAX, RDX, EFLAGS, (X86umul_flag RAX,
GR64:$src))*/]>,</div>

<div>                Sched<[WriteIMul64]>;</div>
</div>

<div> </div>

<div> </div>

<div>I vaguely recall trying to fix tablegen probably at least 5 years
ago, but didn't succeed. Looking back at the code now I can tell you the two
places in DAGISelMatcherGen.cpp that call HasOneImplicitDefWithKnownVT are
definitely unable to handle multiple implicit def destinations in a
pattern.</div>

<div> </div>

<div>
<div>
<div class="gmail_signature">~Craig</div>
</div>
</div>
</div>
</div>
 

<div class="gmail_quote">
<div>On Mon, Jul 9, 2018 at 9:30 PM Michael Stellmann via llvm-dev
<<a href="mailto:llvm-dev@lists.llvm.org"
onclick="parent.window.location.href='llvm-dev@lists.llvm.org';
return false;"
target="_blank">llvm-dev@lists.llvm.org</a>>
wrote:</div>

<blockquote class="gmail_quote" style="margin: 0 0 0
0.8ex;border-left: 1.0px rgb(204,204,204) solid;padding-left:
1.0ex;">Hi,<br/>
<br/>
I'm trying to revive jacobly0's Z80 back-end (from<br/>
<a href="https://github.com/jacobly0/llvm-z80"
target="_blank">https://github.com/jacobly0/llvm-z80</a>) and
build it with a current<br/>
version of LLVM.<br/>
<br/>
Apart from some interface changes, I'm stuck at building the
tables.<br/>
Specifically, the generation of the DAG instruction selector causes
an<br/>
assertion in the table generator:<br/>
<br/>
     Assertion failed: Ops.size() >= NumSrcResults &&
"Didn't provide<br/>
enough results"<br/>
<br/>
I tried to fix the problem by searched in the documentation and in
other<br/>
table sources, but to no avail. Even stepping through that code in
the<br/>
debugger (MatcherGen::EmitResultCode()) didn't help me to find the
cause<br/>
of the problem. The instruction tables description are quite unique
in<br/>
all the officially supported CPU models, I couldn't find any
similar<br/>
code that could help me figuring out what is going wrong.<br/>
<br/>
So I isolated the table sources to a minimum of two simple<br/>
base-instructions and attached these for reproduction of the problem<br/>
(not sure if the attachment gets through).<br/>
<br/>
The table generation is done with:<br/>
<br/>
     llvm-tblgen -gen-dag-isel -I=<path-to-llvm-include> -o=out.inc
Z80.td<br/>
<br/>
The first instruction in Z80InstrInfo.td is a unary instruction, that<br/>
does a rotate left of a byte in memory, resulting in the leftmost bit<br/>
being placed in the Carry flag - and changing the memory contents at
the<br/>
pointer's address (in Z80: "RLC (HL)", I expect).<br/>
The table generation completes without errors with just this
instruction<br/>
(by commenting the last line in Z80InstrInfo.td).<br/>
<br/>
The second one is a binary instruction, adding the contents of a
pointer<br/>
and a register, with results in register A and F (Z80: "ADD
A,(HL)").<br/>
<br/>
A is an 8-bit register. The Z80 ALU can only do 8 bit arithmetic with<br/>
that register and another param. The two instructions don't seem
to<br/>
require a specific register for the address in the table class, so
the<br/>
RegisterInfo table is not defined so far in the minimized version<br/>
<br/>
The problem is in Z80InstrInfo.td, in the following section of<br/>
"BinOp8RF", which is used by the "defm" line that generates
the "add"<br/>
instruction pattern:<br/>
<br/>
     multiclass BinOp8RF<Prefix prefix, bits<3> opcode, string
mnemonic,<br/>
                         bit compare = 0> {<br/>
       let isCompare = compare, Defs = [A, F], Uses = [A] in {<br/>
         def 8ap : I8 <prefix, {0b10, opcode, 0b110}, mnemonic,
"\ta,<br/>
$src", "",<br/>
                       (outs), (ins   ptr:$src),<br/>
                       [(set A, F,<br/>
                            (Z80add_flag<br/>
                                 A, (i8 (load   iPTR:$src))))]>;<br/>
       }<br/>
     }<br/>
<br/>
and the parameters:<br/>
<br/>
     def SDTBinOpRF  : SDTypeProfile<2, 2, [SDTCisInt<0>,<br/>
                                            SDTCisFlag<1>,<br/>
                                            SDTCisSameAs<2, 0>,<br/>
                                            SDTCisSameAs<3,
0>]>;<br/>
<br/>
     def Z80add_flag      : SDNode<"Z80ISD::ADD",    
SDTBinOpRF,<br/>
[SDNPCommutative]>;<br/>
<br/>
<br/>
The unary instruction builds fine, which can be checked by commenting<br/>
out the generation of the binary instruction in the last line of the<br/>
attached Z80InstrInfo.td.<br/>
<br/>
The log in Github indicates that this section was present for over a<br/>
year, so I assume that it did work at some time in the past.<br/>
<br/>
My attempts to fixing the instruction failed with other errors,
pointing<br/>
specifically to the specific problems I introduced with the change,
e.g.<br/>
parameter number mismatch or wrong type, so above (and attached) is
the<br/>
unmodified version.<br/>
<br/>
Any help is appreciated!<br/>
<br/>
Michael<br/>
<br/>
<br/>
_______________________________________________<br/>
LLVM Developers mailing list<br/>
<a href="mailto:llvm-dev@lists.llvm.org"
onclick="parent.window.location.href='llvm-dev@lists.llvm.org';
return false;"
target="_blank">llvm-dev@lists.llvm.org</a><br/>
<a href="http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev"
target="_blank">http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev</a></blockquote>
</div>
</div>
</div>
</div>
</div></div></body></html>

Seemingly Similar Threads

Search for more maybe matching threads

llvm dev - Jul 2018 - Stuck with instruction in tablegen

[llvm-dev] Stuck with instruction in tablegen

[llvm-dev] Stuck with instruction in tablegen

[llvm-dev] Stuck with instruction in tablegen

Seemingly Similar Threads