Have a new TE133 in a dell R320. dahdi_cfg -vvv shows: DAHDI Tools Version - 2.9.1 DAHDI Version: 2.9.1 Echo Canceller(s): Configuration ===================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04) Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05) Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06) Channel 24: D-channel (Default) (Echo Canceler: none) (Slaves: 24) 7 channels to configure. DAHDI_SPANCONFIG failed on span 1: No such device or address (6) Not sure why??? system.conf shows: cat system.conf loadzone=us defaultzone=us span=1,0,0,esf,b8zs bchan=1-6 dchan=24 echocanceller=mg2,1-6 I installed from source. I am running asterisk 11.10.0 libpri is 1.4.14 dahdi modules are loaded with lsmod | grep dahdi lsmod | grep dahdi dahdi_transcode 6729 1 wctc4xxp dahdi_voicebus 54866 2 wctdm24xxp,wcte12xp dahdi 224134 11 dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp,oct612x crc_ccitt 1717 2 wctdm24xxp,dahdi Thoughts? Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140714/927a3186/attachment.html>
On Mon, Jul 14, 2014 at 12:42:34PM -0400, Jerry Geis wrote:> Have a new TE133 in a dell R320. > > dahdi_cfg -vvv shows: > DAHDI Tools Version - 2.9.1 > > DAHDI Version: 2.9.1 > Echo Canceller(s): > Configuration > =====================> > SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) > > Channel map: > > Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) > Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02) > Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03) > Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04) > Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05) > Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06) > Channel 24: D-channel (Default) (Echo Canceler: none) (Slaves: 24) > > 7 channels to configure. > > DAHDI_SPANCONFIG failed on span 1: No such device or address (6) > > > Not sure why??? > > system.conf shows: > cat system.conf > loadzone=us > defaultzone=us > > > span=1,0,0,esf,b8zs > bchan=1-6 > dchan=24 > echocanceller=mg2,1-6 > > > I installed from source. > I am running asterisk 11.10.0 > libpri is 1.4.14 > > dahdi modules are loaded with lsmod | grep dahdi > lsmod | grep dahdi > dahdi_transcode 6729 1 wctc4xxp > dahdi_voicebus 54866 2 wctdm24xxp,wcte12xp > dahdi 224134 11 > dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp,oct612x > crc_ccitt 1717 2 wctdm24xxp,dahdiLooking at the above, it appears you do not have the wcte13xp driver loaded. Check your /etc/dahdi/modules file and add a line to load the wcte13xp driver. Cheers, Shaun -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org
Thanks,> Looking at the above, it appears you do not have the wcte13xp driverloaded. > Check your /etc/dahdi/modules file and add a line to load the wcte13xp driver.Correct, I had copied the OLD configs that did not have the new module. I added like you suggested and off to the races! Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140714/0bfa88c7/attachment.html>