similar to: Issue with new Te133

Hello, After installing on Ubuntu 10.04 using the tutorial on http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html I have a running instance of Asterisk. PROBLEM: result of dahdi_cfg: DAHDI Tools Version - 2.2.1 DAHDI Version: 2.2.1 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2)

Hi All, I have installed asteriskNow with Asterisk 1.6.2.11 and FreePBX 2.7.0.10. I have configured x100p fxo card in my asterisk box. But in my cli mode i am not getting the command *"dahdi show status"* Output of CLI : astrisks*CLI> *dahdi show status* No such command 'dahdi show status' (type 'core show help dahdi show' for other possible commands) I

Hi all! I'm new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. I'm following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded [root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" netjet 14618 0 isdnhdlc 4523 1 netjet mISDNipac

Hi All, Running asterisk 11.25.3, the /proc/cpuinfo says Intel(R) Xeon(R) CPU X5675 @ 3.07GHz lsmod | grep dahdi gives dahdi_transcode 16384 1 wctc4xxp dahdi_voicebus 61440 2 wctdm24xxp,wcte12xp dahdi 225280 11 wctdm24xxp,wcfxo,wctdm,dahdi_transcode,oct612x dahdi_voicebus,wcb4xxp,wct1xxp,wct4xxp,wcte11xp,wcte12xp crc_ccitt 16384 2

I updated Asterisk to 1.6.2.7 and now the user introduction in the meetme application is no longer working: [May 27 09:26:51] WARNING[2407]: channel.c:4034 ast_request: No channel type registered for 'DAHDI' -- Created MeetMe conference 1023 for conference '800' [May 27 09:26:51] WARNING[2407]: app_meetme.c:3640 find_conf: No DAHDI channel available for conference, user

Hello, I just bought a TE121 T1/E1 card, and now trying to install it on a 1.4.23.1 asterisk with dahdi 2.1.0.4 Actually first everything went on well and i managed to see my card on dahdi. Here's the output: #asterisk# dahdi_hardware pci:0000:04:08.0 wcte12xp+ d161:8000 Wildcard TE121 and this is the scan: -------------------------- asterisk# dahdi_scan [1] active=yes alarms=RED

Hello everyone, I have a Atcom AX-1600P(1) card with a FXO module and I can't configure it. I have four extension with this PJSIP settings: --- /etc/asterisk/pjsip.conf --- [transport-udp] type=transport protocol=udp bind=0.0.0.0 [6001] type=endpoint transport=transport-udp context=from-internal disallow=all allow=ulaw auth=6001 aors=6001 direct_media=no rtp_symmetric=yes force_rport=yes

Hello, ? I have a Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] card which seems to work on 1 machine but not on another. It SHOULD load this driver: ? >dahdi_hardware -v pci:0000:00:00.0 wcb4xxp+ 1397:08b4 Junghanns QuadBRI ISDN card Instead of: >dahdi_hardware -v pci:0000:00:00.0 qozap- 1397:08b4 Generic Cologne ISDN card There is no qozap modul in

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

I am getting zero interrupts for a new Digium TE134 Card on a new brand new Dell T40 server with the latest BIOS. Is there something that I am missing or is the card not compatible with Dell servers? (cat /proc/interrupts ; sleep 1 ; cat /proc/interrupts) | grep -i wcte13xp0 16: 0 0 0 0 IR-IO-APIC 16-fasteoi i801_smbus, wcte13xp0 16: 0

Hello! At the end of year 2013 I had problem on my supermicro system with TE133, namely it losted connect to another system. So I opened case and finally card was replaced by TE220. Now I need to buy another 1 port card for almost the same supermicro. Could somebody tell me is this problem resolved? Thank you!

Hello I just updated the kernel, dahdi-linux and dahdi-tools Im also using now asterisk 1.4.26.1 And im still with a red light (not RED/YELLOW anymore): [root at catumbela ~]# /etc/rc.d/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED 1 PRI CAS RED 2 PRI CAS RED 3 PRI CAS RED 4 PRI

On Thu, Jun 6, 2019 at 12:17 PM Malcolm Davenport <malcolmd at sangoma.com> wrote: > Howdy, > > There's a dahdi-linux-complete-3.1.0-rc1+3.1.0-rc1.tar.gz. > > Try that. > I noticed that was there, but I didn't try it originally because it's obviously a beta version. However, I did download it and try it. It does compile, but doesn't work correctly. For one

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> </head> <body bgcolor="#ffffff" text="#000000"> I recently upgraded my Asterisk system to Dahdi and now I have an echo <br> problem. <br> <br> I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium <br> TE121B PCI express

Hi. I am having problems with dahdi using kernel 2.6.32. I am using 2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv ++ dahdi_cfg -vv DAHDI Tools Version - SVN-trunk-r8670 DAHDI Version: SVN-trunk-r7445M Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 04: FXS Kewlstart

Dear all, I know this is more a Digium hardware than an Asterisk issue. Already posted a question at Digium, however also like to see whether anyone in the Asterisk community has encountered the following situation: I installed a Digium B410P BRI PCI card on my new asterisk server, following the steps specified in the manual. I can see the PCI card is available using the lspci command: ...

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.8.0-rc5 DAHDI-Tools-v2.8.0-rc5 dahdi-linux-complete-2.8.0-rc5+2.8.0-rc5 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete *** THIS RC FIXES

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.8.0-rc5 DAHDI-Tools-v2.8.0-rc5 dahdi-linux-complete-2.8.0-rc5+2.8.0-rc5 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete *** THIS RC FIXES

after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI> module load chan_dahdi.so receive the following: signalling must be specified before any channels are. CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure channel '1' Error[4663]:

Hello all, I have a TC400B Digium card in order to deal with transcoding and I have some trouble using it, I have a timer synchronisation problem! I would be very grateful if you have any idea to help me? It seems that the card is not correctly synchronised to the system because when I speak to one side, the sound takes 5 seconds to go to the other side, and increasing, after 30 seconds of call,