Exploding Lemur
2007-Jul-03 22:25 UTC
[asterisk-users] Distinctive ring detection not detecting ring cadences
I'm using Asterisk 1.4.5 (will try 1.4.6 on Thursday, but I don't see anything in the changelog after the 1.4.5 release dealing with distinctive ring), zaptel 1.4.3, and wanpipe 2.3.4-10 with a Sangoma A200 card. I enabled usedistinctiveringdetection in zapata.conf. However, on the Asterisk console, the output I get is: -- Detected ring pattern: 0,0,0 It would appear that Asterisk is just not getting ring info from the card. It worked a few times, but not very reliably, and now not at all. Any thoughts on what the issue may be? Is there other info I can provide that will help? Config files pasted below: zapata.conf: ;autogenerated by /usr/local/sbin/config-zaptel do not hand edit ;Zaptel Channels Configurations (zapata.conf) ; ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=5.0 txgain=-7.0 group=1 callgroup=1 pickupgroup=1 immediate=no usedistinctiveringdetection=yes dring1=360,230,193 dring1context=from-intercom dring2=205,93,0 dring2context=from-zaptel dring3=0,0,0 dring3context=from-zaptel ;Sangoma A200 [slot:6 bus:1 span:1] context=from-zaptel group=0 signalling = fxs_ks channel => 1-4 zaptel.conf: # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us #Sangoma A200 [slot:6 bus:1 span:1] fxsks=1 fxsks=2 fxsks=3 fxsks=4 wanpipe1.conf: #===============================================# WANPIPE1 Configuration File #===============================================# # Date: Mon Jul 31 17:10:23 EDT 2006 # # Note: This file was generated automatically # by /usr/local/sbin/setup-sangoma program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #===============================================# Sangoma Technologies Inc. #=============================================== [devices] wanpipe1 = WAN_AFT_ANALOG, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 6 PCIBUS = 1 FE_MEDIA = FXO/FXS TDMV_LAW = MULAW TDMV_OPERMODE = FCC MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = NO
Exploding Lemur
2007-Jul-12 16:05 UTC
[asterisk-users] Distinctive ring detection not detecting ring cadences
On 7/3/07, Exploding Lemur <explodinglemur at gmail.com> wrote:> I'm using Asterisk 1.4.5 (will try 1.4.6 on Thursday, but I don't see > anything in the changelog after the 1.4.5 release dealing with > distinctive ring), zaptel 1.4.3, and wanpipe 2.3.4-10 with a Sangoma > A200 card. I enabled usedistinctiveringdetection in zapata.conf. > However, on the Asterisk console, the output I get is: > -- Detected ring pattern: 0,0,0Okay, I've installed Asterisk 1.4.7.1, and I'm still having the same issue. Any thoughts? (config files unchanged from my previous mailing list posting) Would any other info help troubleshoot this? -Nick K