Goke Aruna
2007-Dec-02 22:52 UTC
[asterisk-users] setting up two asterisk server as ss7 back to back.
I have used asterisk-1.4.14, zaptel-1.4.7, chan_ss7-1.0.0 on FC7 all went okay. using sangoma a104dx on both machine. I followed the write up on http://www.voip-info.org/wiki/index.php?page=Asterisk+ss7+setup I have the cross over cable between them. however, wanpipe shows connected but the signaling link does not align. i have my configs for host A ##wanpipe1.conf [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 15 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = MASTER TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH TE_SIG_MODE = CCS FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES # zaptel.conf loadzone=uk defaultzone=uk span=1,1,0,ccs,hdb3 bchan=1-31 ### ss7.conf [linkset-ennie] enabled => yes use_connect => yes enable_st => no hunting_policy => odd_lru subservice => auto context = default [link-l1] linkset => ennie channels => 1-15,17-31 schannel => 16 firstcic => 1 enabled => yes [link-l2] linkset => ennie channels => 1-31 schannel => firstcic => 33 enabled => yes [link-l3] linkset => ennie channels => 1-31 schannel => firstcic => 65 enabled => no [link-l4] linkset => ennie channels => 1-31 schannel => firstcic => 97 enabled => no [host-A] enabled => yes opc => 998 dpc => ennie:98 links => l1:1 for the slave host B ##wanpipe1.conf [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 15 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH TE_SIG_MODE = CCS FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES # zaptel.conf loadzone=uk defaultzone=uk span=1,0,0,ccs,hdb3 bchan=1-31 ### ss7.conf [linkset-mahmud] enabled => yes use_connect => yes enable_st => no hunting_policy => odd_lru subservice => auto context = default [link-l1] linkset => mahmud channels => 1-15,17-31 schannel => 16 firstcic => 1 enabled => yes [link-l2] linkset => mahmud channels => 1-31 schannel => firstcic => 33 enabled => no [link-l3] linkset => mahmud channels => 1-31 schannel => firstcic => 65 enabled => no [link-l4] linkset => mahmud channels => 1-31 schannel => firstcic => 97 enabled => no [host-B] enabled => yes opc => 98 dpc => mahmud:998 links => l1:1 Can someone advice on the way forward or has anyone implemented chan_ss7-1.0.0. Thanks Goksie
Dovid B
2008-Jan-03 02:07 UTC
[asterisk-users] setting up two asterisk server as ss7 back to back.
You paid Sangoma for their product and that entitled you to support. Give them a call and see if they can help you. ----- Original Message ----- From: "Goke Aruna" <goksie at gmail.com> To: <asterisk-ss7 at lists.digium.com>; "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com> Sent: Monday, December 03, 2007 12:52 AM Subject: [asterisk-users] setting up two asterisk server as ss7 back to back.> > > I have used asterisk-1.4.14, zaptel-1.4.7, chan_ss7-1.0.0 on FC7 all > went okay. using sangoma a104dx on both machine. > > I followed the write up on > http://www.voip-info.org/wiki/index.php?page=Asterisk+ss7+setup > > I have the cross over cable between them. > > however, wanpipe shows connected but the signaling link does not align. > > i have my configs for host A > > ##wanpipe1.conf > > [devices] > wanpipe1 = WAN_AFT_TE1, Comment > > [interfaces] > w1g1 = wanpipe1, , TDM_VOICE, Comment > > [wanpipe1] > CARD_TYPE = AFT > S514CPU = A > CommPort = PRI > AUTO_PCISLOT = NO > PCISLOT = 4 > PCIBUS = 15 > FE_MEDIA = E1 > FE_LCODE = HDB3 > FE_FRAME = NCRC4 > FE_LINE = 1 > TE_CLOCK = MASTER > TE_REF_CLOCK = 0 > TE_HIGHIMPEDANCE = NO > LBO = 120OH > TE_SIG_MODE = CCS > FE_TXTRISTATE = NO > MTU = 1500 > UDPPORT = 9000 > TTL = 255 > IGNORE_FRONT_END = NO > TDMV_SPAN = 1 > TDMV_DCHAN = 0 > > [w1g1] > ACTIVE_CH = ALL > TDMV_ECHO_OFF = NO > TDMV_HWEC = YES > > > # zaptel.conf > > loadzone=uk > defaultzone=uk > > span=1,1,0,ccs,hdb3 > bchan=1-31 > > ### ss7.conf > > [linkset-ennie] > enabled => yes > use_connect => yes > enable_st => no > hunting_policy => odd_lru > subservice => auto > context = default > > [link-l1] > linkset => ennie > channels => 1-15,17-31 > schannel => 16 > firstcic => 1 > enabled => yes > > [link-l2] > linkset => ennie > channels => 1-31 > schannel => > firstcic => 33 > enabled => yes > > [link-l3] > linkset => ennie > channels => 1-31 > schannel => > firstcic => 65 > enabled => no > > [link-l4] > linkset => ennie > channels => 1-31 > schannel => > firstcic => 97 > enabled => no > > [host-A] > enabled => yes > opc => 998 > dpc => ennie:98 > links => l1:1 > > > for the slave host B > > ##wanpipe1.conf > > [devices] > wanpipe1 = WAN_AFT_TE1, Comment > > [interfaces] > w1g1 = wanpipe1, , TDM_VOICE, Comment > > [wanpipe1] > CARD_TYPE = AFT > S514CPU = A > CommPort = PRI > AUTO_PCISLOT = NO > PCISLOT = 4 > PCIBUS = 15 > FE_MEDIA = E1 > FE_LCODE = HDB3 > FE_FRAME = NCRC4 > FE_LINE = 1 > TE_CLOCK = NORMAL > TE_REF_CLOCK = 0 > TE_HIGHIMPEDANCE = NO > LBO = 120OH > TE_SIG_MODE = CCS > FE_TXTRISTATE = NO > MTU = 1500 > UDPPORT = 9000 > TTL = 255 > IGNORE_FRONT_END = NO > TDMV_SPAN = 1 > TDMV_DCHAN = 0 > > [w1g1] > ACTIVE_CH = ALL > TDMV_ECHO_OFF = NO > TDMV_HWEC = YES > > > # zaptel.conf > > loadzone=uk > defaultzone=uk > > span=1,0,0,ccs,hdb3 > bchan=1-31 > > ### ss7.conf > > [linkset-mahmud] > enabled => yes > use_connect => yes > enable_st => no > hunting_policy => odd_lru > subservice => auto > context = default > > [link-l1] > linkset => mahmud > channels => 1-15,17-31 > schannel => 16 > firstcic => 1 > enabled => yes > > [link-l2] > linkset => mahmud > channels => 1-31 > schannel => > firstcic => 33 > enabled => no > > [link-l3] > linkset => mahmud > channels => 1-31 > schannel => > firstcic => 65 > enabled => no > > [link-l4] > linkset => mahmud > channels => 1-31 > schannel => > firstcic => 97 > enabled => no > > [host-B] > enabled => yes > opc => 98 > dpc => mahmud:998 > links => l1:1 > > > > Can someone advice on the way forward or has anyone implemented > chan_ss7-1.0.0. > > Thanks > > Goksie > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >