Hi!, this issue makes me crazy. I read a lot of docs, also * mailling list and I try a lot of things without success. Any help will be appreciated. Here is the info: Hardware: -------------------------------------------- Supermicro Server with motherboard X7DB8, chipset Intel 5000P, Xeon 5050 Digium TE110P Software --------------------------------------------- Asterisk version 1.2.12.1 Zaptel version 1.2.8 /etc/zaptel.conf loadzone=es defaultzone=es span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 The dammed errors: Jan 25 14:11:52 NOTICE[4934]: chan_zap.c:8316 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 Jan 25 14:11:52 NOTICE[4934]: chan_zap.c:8316 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Jan 25 14:11:52 NOTICE[4934]: chan_zap.c:8316 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 ... I tried the following without success: - Disable Hyper Threading. - Disable NIC's, RAID controller, usb, serial... to avoid shared IRQ, so TE110P has his own IRQ as shows lspci -vb. - Also I tried with APIC and without APIC. ...... These HDLC errors appear when I physically loop the E1 interface in the Card and also appear, and more frequently, when I connect the E1 circuit (from the Telco) to the interface of the Card. Thanks a lot -- ---------------------------------------------------------------------------------------- Marc Patino G?mez Dpto. Sistemas Claranet Espa?a. Servicios Internet C/General Almirante 2-28, Torres Cerd? 08014 Barcelona Tel. Informaci?n General: 902 884 633 Tel. Soporte T?cnico: 902 884 622 Fax: +34 93 445 19 20 www.claranet.es Claranet Group: United Kingdom - Spain - France - Germany - Portugal - Netherlands - USA ----------------------------------------------------------------------------------------
There was a recent driver fix that *might* help you. It's not in an official 1.x.x release yet, but if you check out 1.2 from svn, you should get the latest version of the driver with the fix. Matthew Fredrickson On Jan 25, 2007, at 9:15 AM, Marc Patino G?mez wrote:> Hi!, > > this issue makes me crazy. I read a lot of docs, also * mailling list > and I try a lot of things without success. > > Any help will be appreciated. Here is the info: > > Hardware: > -------------------------------------------- > Supermicro Server with motherboard X7DB8, chipset Intel 5000P, Xeon > 5050 > Digium TE110P > > Software > --------------------------------------------- > Asterisk version 1.2.12.1 > Zaptel version 1.2.8 > > /etc/zaptel.conf > > loadzone=es > defaultzone=es > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > bchan=17-31 > > The dammed errors: > > Jan 25 14:11:52 NOTICE[4934]: chan_zap.c:8316 pri_dchannel: PRI got > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > Jan 25 14:11:52 NOTICE[4934]: chan_zap.c:8316 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 > Jan 25 14:11:52 NOTICE[4934]: chan_zap.c:8316 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 > ... > > I tried the following without success: > > - Disable Hyper Threading. > - Disable NIC's, RAID controller, usb, serial... to avoid shared IRQ, > so TE110P has his own IRQ as shows lspci -vb. > - Also I tried with APIC and without APIC. > ...... > > > These HDLC errors appear when I physically loop the E1 interface in > the Card and also appear, and more frequently, when I connect the E1 > circuit (from the Telco) to the interface of the Card. > > > Thanks a lot > > -- > ----------------------------------------------------------------------- > ----------------- > > Marc Patino G?mez > Dpto. Sistemas > > Claranet Espa?a. Servicios Internet > C/General Almirante 2-28, Torres Cerd? > 08014 Barcelona > Tel. Informaci?n General: 902 884 633 Tel. Soporte T?cnico: 902 884 622 > Fax: +34 93 445 19 20 > www.claranet.es > > Claranet Group: United Kingdom - Spain - France - Germany - Portugal - > Netherlands - USA > > ----------------------------------------------------------------------- > ----------------- > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
Thanks for your answers :) I use another server to test digium board and my config, and it works well, so... I think the problem is between chipset, Intel 5000P and digium card. I will try to put the digium board in other PCI-X slots, and change some timing PCI parameters in the BIOS. Regards Marc Patino G?mez wrote:> Hi!, > > this issue makes me crazy. I read a lot of docs, also * mailling list > and I try a lot of things without success. > > Any help will be appreciated. Here is the info: > > Hardware: > -------------------------------------------- > Supermicro Server with motherboard X7DB8, chipset Intel 5000P, Xeon 5050 > Digium TE110P > > Software > --------------------------------------------- > Asterisk version 1.2.12.1 > Zaptel version 1.2.8 > > /etc/zaptel.conf > > loadzone=es > defaultzone=es > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > bchan=17-31 > > The dammed errors: > > Jan 25 14:11:52 NOTICE[4934]: chan_zap.c:8316 pri_dchannel: PRI got > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > Jan 25 14:11:52 NOTICE[4934]: chan_zap.c:8316 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 > Jan 25 14:11:52 NOTICE[4934]: chan_zap.c:8316 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 > ... > > I tried the following without success: > > - Disable Hyper Threading. > - Disable NIC's, RAID controller, usb, serial... to avoid shared IRQ, > so TE110P has his own IRQ as shows lspci -vb. > - Also I tried with APIC and without APIC. > ...... > > > These HDLC errors appear when I physically loop the E1 interface in > the Card and also appear, and more frequently, when I connect the E1 > circuit (from the Telco) to the interface of the Card. > > > Thanks a lot >-- ---------------------------------------------------------------------------------------- Marc Patino G?mez Dpto. Sistemas Claranet Espa?a. Servicios Internet C/General Almirante 2-28, Torres Cerd? 08014 Barcelona Tel. Informaci?n General: 902 884 633 Tel. Soporte T?cnico: 902 884 622 Fax: +34 93 445 19 20 www.claranet.es Claranet Group: United Kingdom - Spain - France - Germany - Portugal - Netherlands - USA ----------------------------------------------------------------------------------------