search for: x7db8

Hi!, this issue makes me crazy. I read a lot of docs, also * mailling list and I try a lot of things without success. Any help will be appreciated. Here is the info: Hardware: -------------------------------------------- Supermicro Server with motherboard X7DB8, chipset Intel 5000P, Xeon 5050 Digium TE110P Software --------------------------------------------- Asterisk version 1.2.12.1 Zaptel version 1.2.8 /etc/zaptel.conf loadzone=es defaultzone=es span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 The dammed errors: Jan 25 14:11:52 NOTICE[493...

...have set up the system with ZFS boot. Everything works fine until I pull a drive. The system locks up when I try to run any command e.g. zpool status. There is no communication with the server from then on. It does not even respond to pings. Setup - Supermicro SC836TQ-R800 Chassis Supermicro X7DB8 Motherboard Supermicro SAT2-MV8 SATA controller Hitatchi Deskstar Harddrives 2 80GB Mirrored and 4 1 TB RaidZ Autoreplace set to ON If i push the reset button the system will come back up ok. I can then run zpool status and find which drive is ''bad''. I would rather the system k...

...stem with ZFS boot. Everything works fine until I pull a drive. The system locks up when I try to run any command e.g. zpool status. There is no communication with the server from then on. It does not even respond to pings. > > Setup - > > Supermicro SC836TQ-R800 Chassis > Supermicro X7DB8 Motherboard > Supermicro SAT2-MV8 SATA controller > Hitatchi Deskstar Harddrives 2 80GB Mirrored and 4 1 TB RaidZ > Autoreplace set to ON > > If i push the reset button the system will come back up ok. I can then run zpool status and find which drive is ''bad''. I wou...

...occurs even when I have vm.overcommit_memory=2 set in /etc/sysctl.conf. The research I've done indicates that this is a bio-uses-GFP_DMA bug with EM64T. I'm running CentOS 4.4 with the 2.6.9-42.0.3.ELsmp x86_64 kernel on the following hardware: 2 x Intel Xeon CPU 5148 @ 2.33GHz Supermicro X7DB8 motherboard Is there a patch or workaround for this, or some parameter that I can pass to the kernel at boot? Any help would be appreciated. thanks, Lance ***** oom-killer: gfp_mask=0xd1 Mem-info Node 0 DMA per-cpu: cpu 0 hot: low 2, high 6, batch 1 cpu 0 cold: low 0, high 2, batch 1 cpu 1 hot:...

...when booting Linux 2.6.32 (linux-image-2.6.32-5-xen-amd64 from Squeeze) on Xen. I tried with Xen 4.0 from Squeeze (xen-hypervisor-4.0-amd64) the behavior is the same (it hangs with Linux 3.2). The systems are all running 2 quad-core Xeon (E5320 or E5405) with 32Gb to 64Gb of RAM, with Supermicro X7DB8 motherboards. Here is a LSPCI on one of them : 00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1) 00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) 00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Por...