similar to: TE110P and HDLC problems

Hi folks, I'm running asterisk 1.2.10 and I need to use agent dynamic login. I read some doc and follow some tutorials but the agents can't login into the queue. Asterisk ask to me to dial the password agent and after this, it doesn't do nothing ( it doesn't tell login ok or login incorrect..). In the * console if I do show agents, any agent are logged. Any help will be

Hi, I would like to know how suppress number for outside dialling in CDR table. For example, if I need press 9 key to make an outside call, I would like that the number in dst field in cdr table was the outside number without 9 key. It's possible? Thanks in advance, srsergio

Hi, I've asterisk-oh323 0.7.3 and after 2 days of test finally I can make calls from one h.323 device to the world using sip trunks :) I can call to sip devices from the h.323 one. Now I want to make calls from sip to h.323 but it does not work. Maybe one of us have a configuration example to do this? I'm using the latest svn version (compiled yesterday).

Hi, I'm new in this list and my experience on Asterisk quite limited, can anyone help me. This line is shown in the asterisk console and I don't now the meaning -- parse_srv: SRV mapped to host proxysip.sip.somedomain.com, port 5060 Thanks folks -- ---------------------------------------------------------------------------------------- Marc Patino G?mez Dpto. Sistemas Claranet

Hi fellow asterisk users, I am running Asterisk 1.4.29 with an Digium TE121 card (wcte12xp kernel module) an approx. 100 snom320. The whole installation is running without issues since 5 months. Without having changed anything on the asterisk server for at least 2 months, i noticed "clicking sounds" at external calls over the PRI. Asterisk constantly throws the following messages: ...

I receive this error on the asterisk console and it is pretty much ALWAYS coming up. Sometimes there will be a break where it does not display. We had our PRI provider test the lines and they claim that there is no signalling problem. It doesn't matter if there are no calls or if there are 10 calls in progress the error is still displayed. I also get an annoying popping or clicking sound

I've read as much as I can on this error and still can't seem to figure out what's causing this error: Jun 23 20:54:58 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Jun 23 20:55:03 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Jun 23 20:55:03 NOTICE[7483]:

Hi all, So, we reverted the LibPRI version and tested it, and then tried with the latest version of everything. Still no changes. The BRI line is in PTMP. If we set the configs to PTMP in the genconf_parameters and try it, we get the following: [Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: Unable to receive TEI from network! If we set it to PTP (which it is not) we

Hi all, After running fine for a few months now asterisk seems to hang frequently , still functioning but the DAHDI channels seem busy (users report a busy signal when calling or being called) A reboot will allow it to run for another day or maybe 2 or 3 till the problem occurs again. running stock Asterisk 1.6.2.9-2+squeeze2 on Debian with stock kernel 2.6.32-5-686 i get the following

Hi all, as good? I am trying to go up a board TE110P with link E1 ISDN PRI to establish connection with a central office Siemens HiPath 4000. But I am having the following errors: Server1:~ # asterisk -r Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'

Hi list, I have a terrible noise issue with Dell SC1430 + Digium TE110P. The digium card is not sharing interrupts with any other device, as I saw in Dell's BIOS and also with "lspci -vb" command. After changing coax wire, UTP, balum, digium card ... I have found that the problem is in Dell box, so now I'm running the same Asterisk config in other server with the same

Hi to the ML. I''m new to VLAN configuration, and combining it to XEN is a bit difficult. I want to use VLAN because it''s possible to "arping" from a domU to an other, and VLAN looks like; the only solution to prevent that. May be I''m wrong if someone got a solution, I may be interrested. I''ve also tryed ebtables, but nothing to prevent arp

Hi, I am getting this message on the * console on my first pri span. Pri show span show it is down, and I can't make any calls from the span. Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27

Okay, now.. I've got it compiled and running (thanks by the way to Moritz and Akos). Using WinAMP 2.81 and the latest build of oddcastDSP i've got it streaming happilly to the server with the server happilly accepting the stream. Now, however whenever anybody tries connecting to the server it automatically kicks them off ie.. -> [26/Aug/2002:23:56:43] Accepted client 4 from

I frequently get this error message, it repeats itself hundred/thousands of times and never stops. chan_sip.c:7467 sipsock_read: Failed to grab lock, trying again... During this period, I can make no SIP calls what-so-ever. The only way I've been able to stop it is to killall -9 asterisk. Doing a restart now doesn't respond. Anyone know why? -- Daniel Jimenez

Hi all, Last night I went to replace an Asterisk 1.4 + mISDN + b410p box with Asterisk 1.6.2 and DAHDI BRI - to no avail. I had two servers so copied network setting etc from the working one, moved the card across, ran dahdi_genconf etc and it didn't work. Here's the console output with notices disabled: lucas*CLI> pri intense debug span 1 Enabled debugging on span 1 [Dec 16

I'm running an E400P. Every now and then Asterisk stops receiving incoming calls. This turns up in the messages log: Nov 25 10:49:12 WARNING[65541]: File chan_zap.c, Line 5793 (pri_dchannel): Ring requested on channel 1 already in use on span 1. Hanging up owner. Nov 25 10:49:15 WARNING[81926]: File chan_zap.c, Line 5793 (pri_dchannel): Ring requested on channel 1 already in use on

hello all, i'm using TE110P and all configuration prosess is done. but after i do the 'modprobe' for zaptel and wcte11xp, follow by ztcfg -vv and asterisk -vvvgc i have this error. *CLI> May 27 14:44:33 WARNING[3059]: chan_zap.c:8534 pri_dchannel: PRI Error: We think we're the network, but they think they're the network, too. May 27 14:44:34 WARNING[3059]: chan_zap.c:8534

Hi, Anybody knows why a Solaris 10 HVM domU hangs when kernel is booting on my Intel CPU box. I had no problem installing Solaris 10 on an AMD CPU Box. Any advices? Many thanks, Marc _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I am trying to test a new setup of NV74. I have set up the system with ZFS boot. Everything works fine until I pull a drive. The system locks up when I try to run any command e.g. zpool status. There is no communication with the server from then on. It does not even respond to pings. Setup - Supermicro SC836TQ-R800 Chassis Supermicro X7DB8 Motherboard Supermicro SAT2-MV8 SATA controller