Tell us about channels 45-47...
We have 45-47 defined in zapata.conf, but not in zaptel.conf. Probably not
the problem, but it might cause some confusion...
Also, look at your timing sources. They don't look quite right to me. Spans
1 and 2 are both marked as primary timing sources.
Hope that helps,
David
On 1/4/07, Rob Schall <rschall@callone.net> wrote:>
> <Correction in my zapata.conf file I used>
>
> Hey Everyone,
>
> So this is a problem I've been having for sometime now. I sent a few
> messages to the list with no luck.
>
> The problem is that when people dial into the Asterisk system using DID
> numbers, it works the first time or 2, then I get busy signals.
> A friend recommended I clear out the zapata and zaptel, start over, and
> recreate my wanpipe stuff. He thought the problem was with the spans
> themselves.
>
> However, when I use the following information, and restart wanrouter, I
> get an error.
>
> Zapata.conf
>
> [channels]
>
> language=en
> context=internal
> switchtype=national
> pridialplan=unknown
> signalling=pri_cpe
> faxdetect=incoming
> usecallerid=yes
> echocancel=yes
> echocancelwhenbridged=yes
> group=0
> channel => 1-23
>
> group=1
> signalling=em_w
> channel => 25-47
>
>
> Zaptel.conf
>
> span=1,1,0,esf,b8zs
> span=2,1,0,esf,b8zs
> bchan=1-23
> dchan=24
> e&m=25-44
>
>
>
> -------------ERROR----------------
> Channel map:
>
> Channel 01: Clear channel (Default) (Slaves: 01)
> Channel 02: Clear channel (Default) (Slaves: 02)
> Channel 03: Clear channel (Default) (Slaves: 03)
> Channel 04: Clear channel (Default) (Slaves: 04)
> Channel 05: Clear channel (Default) (Slaves: 05)
> Channel 06: Clear channel (Default) (Slaves: 06)
> Channel 07: Clear channel (Default) (Slaves: 07)
> Channel 08: Clear channel (Default) (Slaves: 08)
> Channel 09: Clear channel (Default) (Slaves: 09)
> Channel 10: Clear channel (Default) (Slaves: 10)
> Channel 11: Clear channel (Default) (Slaves: 11)
> Channel 12: Clear channel (Default) (Slaves: 12)
> Channel 13: Clear channel (Default) (Slaves: 13)
> Channel 14: Clear channel (Default) (Slaves: 14)
> Channel 15: Clear channel (Default) (Slaves: 15)
> Channel 16: Clear channel (Default) (Slaves: 16)
> Channel 17: Clear channel (Default) (Slaves: 17)
> Channel 18: Clear channel (Default) (Slaves: 18)
> Channel 19: Clear channel (Default) (Slaves: 19)
> Channel 20: Clear channel (Default) (Slaves: 20)
> Channel 21: Clear channel (Default) (Slaves: 21)
> Channel 22: Clear channel (Default) (Slaves: 22)
> Channel 23: Clear channel (Default) (Slaves: 23)
> Channel 24: D-channel (Default) (Slaves: 24)
> Channel 25: E & M (Default) (Slaves: 25)
> Channel 26: E & M (Default) (Slaves: 26)
> Channel 27: E & M (Default) (Slaves: 27)
> Channel 28: E & M (Default) (Slaves: 28)
> Channel 29: E & M (Default) (Slaves: 29)
> Channel 30: E & M (Default) (Slaves: 30)
> Channel 31: E & M (Default) (Slaves: 31)
> Channel 32: E & M (Default) (Slaves: 32)
> Channel 33: E & M (Default) (Slaves: 33)
> Channel 34: E & M (Default) (Slaves: 34)
> Channel 35: E & M (Default) (Slaves: 35)
> Channel 36: E & M (Default) (Slaves: 36)
> Channel 37: E & M (Default) (Slaves: 37)
> Channel 38: E & M (Default) (Slaves: 38)
> Channel 39: E & M (Default) (Slaves: 39)
> Channel 40: E & M (Default) (Slaves: 40)
> Channel 41: E & M (Default) (Slaves: 41)
> Channel 42: E & M (Default) (Slaves: 42)
> Channel 43: E & M (Default) (Slaves: 43)
> Channel 44: E & M (Default) (Slaves: 44)
>
> 44 channels configured.
>
> ZT_SPANCONFIG failed on span 1: Invalid argument (22)
>
>
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070104/e270849a/attachment.htm