search for: wanpipe

LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o Building modules, stage 2. MODPOST *** Warning: "register_wanec_iface" [/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined! *** Warning: "unregister_wanec_iface" [/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined! CC /root/w...

Hi all, as good? I try to install asterisk-1.2.14, zaptel-1.2.12,libpri-1.2.4,addons-1.2.5 , sounds-1.2.1 and wanpipe-2.3.4-3 and hwec-utils-beta4-2.3.4 But it is not compiling drivers of the Sangoma, why udev's for board in "/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I install a board TE110P Digium, udev's is created and asterisk functions perfectly. : ) This mine motherb...

...already cc'd Sangoma support. Hope they are working today! -----Original Message----- From: Eric "ManxPower" Wieling [mailto:eric@fnords.org] Sent: Friday, December 22, 2006 10:02 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma Wanpipe 2.3.4-3 compilation fails under FC2 with Zaptel 1.0.9.2 Looks like you do not have Zaptel source installed, or WanPipe can't find the Zaptel source. Colin Anderson wrote: > LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o > Building modules, stage 2. > MODPOST > *** Wa...

...Rebooting now with the new card. Hold me, I'm scared. -----Original Message----- From: Colin Anderson [mailto:ColinA@landmarkmasterbuilder.com] Sent: Friday, December 22, 2006 10:09 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users] Sangoma Wanpipe 2.3.4-3 compilation fails un der FC2 with Zaptel 1.0.9.2 Thanks for replying. It's there, /usr/src/zaptel and it's valid. The script checks for its existence before compiling. The only thing that's unusual about this zaptel is that it is patched to support KB2 echo can. Gavin: Thanks...

Newest wanpipe (3.3.16) beta drivers do not compile against dahdi-linux 2.2.0-rc2 which is what you get when you get dahdi-linux-current.tar.gz Anyone have a workaround or patch? Error below ==================== Building modules, stage 2. MODPOST CC /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wa...

Hey! I am installing Sangoma A102D wanpipe driver and i got following error. what is this ? why dir isn't there ? wanpipe-3.5.16 # make dahdi DAHDI_DIR=/usr/src/dahdi wanpipe-3.5.16 # make install ....Send .... .... Installing Wanpipe Firmware update utility in /etc/wanpipe/util/wan_aftup install -D wan_aftup /usr/sbin/wan_aftup...

Trying to install wanpipe 3.5.18. No errors during compile. But when I reach the point where wanpipe and dahdi_cfg is started, I encountered an error. Starting WAN Router... Loading WAN drivers: wanpipe done. Starting up device: wanpipe1 wanconfig: WAN device wanpipe1 driver load failed !! : ioctl...

Hi list. some info: zaptel 1.4.0 wanpipe 2.3.4-2 kernel 2.6.19.1 Debian I'm trying to build wanpipe on my server, but I got a error that it can't find config.h.. I found a post on an other unrelated mailing list which stated that includes/linux/config.h has been removed from 2.6.19. It also suggested replacing all referenc...

...00 working with Asterisk 1.6.1 and DAHDI 2.2. I've tried running ./Setup dahdi (and with --64-bit_4GB flag, running amd64) and the compile fails with this for many versions of the driver (incl. 3.3.16, 3.3.16.22, and 3.4.1): Building modules, stage 2. MODPOST 1 modules CC /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.mod.o LD [M] /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.ko make[1]: Leaving directory `/usr/src/linux-headers-2.6.26-2-amd64' make -C /lib/modules/2.6.26-2-amd64/build SUBDIRS=/usr/src/wanpipe-3.3.16/kdrvtmp CC=gcc KBUILD_VERBOSE=0 modules ma...

Hi all, I have tried to install Wanpipe 7.0.20 in a fresh-installed Debian 8.5 (Jessie) server, but when I reach to the point where I have to enter the Linux Headers directory *(installed in default with ?apt-get install linux-headers-$(uname -r)?)*, I get an error, the package refuses to compile and installation aborts. If I try the sa...

...01.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: NEC Corporation Unknown device 1000 Flags: bus master, medium devsel, latency 64, IRQ 10 Memory at fdde0000 (32-bit, non-prefetchable) [size=64K] Nothing else uses IRQ 10. An error when i installed wanpipe stable version 2.3.4-12, i also get the same error when i used wanpipe 3.1.2 WANPIPE DRIVER COMPILE LOG Thu Jul 26 21:26:33 PHT 2007 ----------------------------------- make -C /lib/modules/2.6.22.1-27.fc7/build SUBDIRS=/usr/local/src/wanpipe-2.3.4-12/kdrvtmp CC=gcc KBUILD_VERBOSE=0 modules mak...

I'm trying to install wanpipe on my new 2.6.21-2-amd64 core 2 duo machine (Debian's amd64 works with EMT64 too) to run Asterisk. I'm getting compilation errors when trying to install the wanpipe utilities. We are intending to use a Sangoma A102 card for ISDN30 in the UK. I've tried both the current stable 2.3.4-10...

Hi everybody! I'm triying to install a Sangoma A200-R FXO card on a Debian Linux 5 (Lenny), 2.6.26 kernel. To install wanpipe driver I type: WANPIPE_FOLDER# ./Setup install Everything seems to be ok. There are no broken dependencies and the hardware is well detected, even zaptel is recompiled with no errors, but at the time to compile wanpipe I'm getting this error message: ------------------ include/linux...

...as been a post to this list somewhere arount april which said that it is possible to use a Sangoma BRI A500 card with zaptel and asterisk bristuff. That is, without sangoma_brid and sangoma_mgd daemons and without woomera channels. Could anybody give me a short hint how to configure this? I tried wanpipe-driver + zaptel + asterisk-bristuffed, but I couldn't get zaptel to recognize the sangoma channels. modprobe wanpipe did load zaptel module and others but no spans appeared in /proc/zaptel or /etc/zaptel.conf. I tried various config options of the wanpipe setup tool, but to no avail. genzapt...

Hi, I learned about shorewall a few days ago and am quite impressed with how easy it was to create a powerful firewall. I set up a test system with a cable modem and it worked flawlessly. I''m going to be building a Router/Firewall for a new T1 that will be using a Sangoma WANpipe card w/ integrated CSU/DSU to connect to a T1. Has anybody done this yet, or do you know if it''s possible to use say the interface WANPPP1 or whatever it is called instead of a standard ETHx device? Thanks. -Ron

Hey Guy, I have ubuntu 10.04 64bit and compiled dahdi / wanpipe 3.5.19 /asterisk-1.8.x I didn't understand what is the relation between wanpipe and dahdi ? do i need to start wanrouter service ? I am getting weird errors and my system got kernel panic many time when i restart dahdi service. any idea ? what is the startup sequence of all these service...

Hello All; Wanpipe is working only with sangoma cards so it does not work with digium cards? Also, who is better: to have echo canceler built in with the hardware or using olsec? Regards Bilal

I just got a brand new A101 and am trying to install it in my test Asterisk box. The install went without a hitch. I followed the directions on the Sangoma Wiki: Wanpipe Asterisk Install http://sangoma.editme.com/wanpipe-linux-asterisk-install Wanpipe for Asterisk Configuration http://sangoma.editme.com/wanpipe-asterisk-configure It went perfect, no problems and Asterisk came up fine. I downed the box and moved it from my office to the computer room where I could...

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Hi: I install A102 sangoma's card and connect E1 link it now for configuring wanpipe which one should I select for dial plan context:from pstn?or from internal? Best regards. --------------------------------- Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out. -------------- next part -------------- An HTML attachment...