I am running Asterisk 1.0.9 and the latest bristuff in combination with a
HFC isdn card, connected to a BRI interface.
For some reason, I am not able to have it dial out (see below). It exits
with DIALSTATUS=CHANUNAVAIL.
One thing that may be misconfigured is that it says: Signalling Type: PRI
Signalling.
How do I change this? Or is this the correct value?
I posted my configs below.
------ Console output: (note the PRI Signalling)
*CLI> zap show channel 1
Channel: 1
File Descriptor: 17
Span: 1
Extension:
Dialing: no
Context: default
Caller ID string:
Destroy: 0
InAlarm: 1
Signalling Type: PRI Signalling
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: yes
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Actual Hookstate: Onhook
------
------
*CLI> bri debug span 1
Enabled debugging on span 1
*CLI> dial 99xxxxxxxxxx
*CLI> -- Executing Dial("OSS/dsp",
"Zap/g1/xxxxxxxxxx|120") in new stack
Unable to create channel of type 'Zap'
== Everyone is busy/congested at this time
Exiting with DIALSTATUS=CHANUNAVAIL.
------
------ zapata.conf:
[channels]
switchtype = euroisdn
signalling = bri_cpe_ptmp
nationalprefix = 0
internationalprefix = 00
usecallingpres=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=1.5
txgain=1.5
immediate=no
busydetect=no
callprogress=no
musiconhold=default
usecallerid=yes
callerid=asreceived
immediate=yes
signalling=bri_cpe_ptmp
group = 1
context=default
channel => 1-2
------
------ zaptel.conf:
span=1,1,3,ccs,ami
bchan=1,2
dchan=3
loadzone=nl
defaultzone=nl
