Robert Rozman
2005-Mar-28 07:34 UTC
[Asterisk-Users] Connecting quadbri to EuroISDN with 2 TE and 2 NT ports - what cables and settings ?
Hi, I'm trying to connect quadbri between powered ISDN phone and ISDN line: ISDN <---1---> TE - * - NT <--2--> Phone I use quadbri, suse 9.2 and latest 0.2.0-RC7k bristuff. I've used sample settings provided with package, but do get strange error (I think that I have wrong setting for P2P or P2MP setting and cables 1 and 2). If I connect phone to ISDN with straight cable it works. I've put quadbri in between, and connected ISDN to span1 in TE mode, and phone in NT mode on span4. Did configuration (added at the end). I get errors: qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 I'm not sure what cables to use. I use straight for -1- and -2-. Is this right ? I'm in European community (EuroISDN) so I guess I should have some pretty standard connections... I have ISDN line with 2 MSNs and two connectors on NT termination - so I guess this is P2MP. Is this OK ? Does anyone have working example for Germany ? There is also one strange thing: I get this in dmesg when loading qozap module, although I have specified 4th port to be NT - and pri show span 4 shows it in netowork mode: Zapata Telephony Interface Unloaded module zaptel unsupported by SUSE/Novell, tainting kernel. Zapata Telephony Interface Registered on major 196 module qozap unsupported by SUSE/Novell, tainting kernel. PCI: Enabling device 0000:02:0c.0 (0000 -> 0003) ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 209 qozap: S/T ports: 4 [ TE TE TE TE ] qozap: 1 multiBRI card(s) in this box, 4 BRI ports total. Registered tone zone 3 (Netherlands) Thanks in advance, regards, Rob. #--------- /etc/zaptel.conf: loadzone=nl defaultzone=nl # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 #--------- /etc/asterisk/zapata.conf [channels] switchtype = euroisdn pridialplan = dynamic prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 usecallingpres=yes echocancel = yes echocancelwhenbridged = yes echotraining = 100 ;------------------------------------------------------------------- ; p2p TE mode (for connecting ISDN lines in point-to-point mode) ;signalling = bri_cpe ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) signalling = bri_cpe_ptmp context=isdn-incoming group = 1 ; S/T port 1-3 (first quadBRI, or lower ports of an octoBRI) channel => 1-2 channel => 4-5 channel => 7-8 ;------------------------------------------------------------------- ; p2p NT mode (for connecting an ISDN PBX in point-to-point mode) signalling = bri_net context=pbx-incoming group = 2 ; S/T port 4 (second quadBRI, or upper ports of an octoBRI) channel => 10-11
Michael Bielicki
2005-Mar-28 09:05 UTC
[Asterisk-Users] Connecting quadbri to EuroISDN with 2 TE and 2 NT ports - what cables and settings ?
the cables are all straight cables but it seems you did not set the jumpers on port4 On Mon, 28 Mar 2005 16:34:18 +0200, Robert Rozman <rozman@fri.uni-lj.si> wrote:> Hi, > > I'm trying to connect quadbri between powered ISDN phone and ISDN line: > ISDN <---1---> TE - * - NT <--2--> Phone > > I use quadbri, suse 9.2 and latest 0.2.0-RC7k bristuff. I've used sample > settings provided with package, but do get strange error (I think that I > have wrong setting for P2P or P2MP setting and cables 1 and 2). > > If I connect phone to ISDN with straight cable it works. I've put quadbri in > between, and connected ISDN to span1 in TE mode, and phone in NT mode on > span4. Did configuration (added at the end). I get errors: > > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > > I'm not sure what cables to use. I use straight for -1- and -2-. Is this > right ? I'm in European community (EuroISDN) so I guess I should have some > pretty standard connections... > > I have ISDN line with 2 MSNs and two connectors on NT termination - so I > guess this is P2MP. Is this OK ? > > Does anyone have working example for Germany ? > > There is also one strange thing: I get this in dmesg when loading qozap > module, although I have specified 4th port to be NT - and pri show span 4 > shows it in netowork mode: > > Zapata Telephony Interface Unloaded > module zaptel unsupported by SUSE/Novell, tainting kernel. > Zapata Telephony Interface Registered on major 196 > module qozap unsupported by SUSE/Novell, tainting kernel. > PCI: Enabling device 0000:02:0c.0 (0000 -> 0003) > ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 209 > qozap: S/T ports: 4 [ TE TE TE TE ] > qozap: 1 multiBRI card(s) in this box, 4 BRI ports total. > Registered tone zone 3 (Netherlands) > > Thanks in advance, > > regards, > > Rob. > > #--------- /etc/zaptel.conf: > loadzone=nl > defaultzone=nl > # qozap span definitions > # most of the values should be bogus because we are not really zaptel > span=1,1,3,ccs,ami > span=2,0,3,ccs,ami > span=3,0,3,ccs,ami > span=4,0,3,ccs,ami > > bchan=1,2 > dchan=3 > bchan=4,5 > dchan=6 > bchan=7,8 > dchan=9 > bchan=10,11 > dchan=12 > > #--------- /etc/asterisk/zapata.conf > [channels] > > switchtype = euroisdn > > pridialplan = dynamic > prilocaldialplan = local > nationalprefix = 0 > internationalprefix = 00 > usecallingpres=yes > > echocancel = yes > echocancelwhenbridged = yes > echotraining = 100 > > ;------------------------------------------------------------------- > ; p2p TE mode (for connecting ISDN lines in point-to-point mode) > ;signalling = bri_cpe > ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) > signalling = bri_cpe_ptmp > > context=isdn-incoming > group = 1 > > ; S/T port 1-3 (first quadBRI, or lower ports of an octoBRI) > channel => 1-2 > channel => 4-5 > channel => 7-8 > ;------------------------------------------------------------------- > > ; p2p NT mode (for connecting an ISDN PBX in point-to-point mode) > signalling = bri_net > > context=pbx-incoming > group = 2 > > ; S/T port 4 (second quadBRI, or upper ports of an octoBRI) > channel => 10-11 > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- Michal Bielicki http://www.asterisk.com.pl/