search for: cardid

...bristuff packages. 2/ We use TE mode 3/ Card is working on older 2.4 system, we use same cables and ISDN devices. 4/ On Dell we have a Centos 4.1 with 2.6.12 kernel. After loading the driver we got CRC errors like this: Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 1 Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 3 Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/...

...first channel of each line is working i.e. channels 1 and 4 work but 2 and 5 don't. Our config is the same on this box as 15 other similar installations where all works well. the only error I see is in /var/log/messages: Jun 28 15:49:31 pbxct kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jun 28 15:51:27 pbxct kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jun 28 15:53:09 pbxct kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jun 28 15:56:48 pbxct kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jun...

Good day all Is there a fix for these errors yet for the junghanns cards Jul 26 17:15:05 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 6 z1 1 z2 107 Jul 26 17:15:18 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 6 z1 10 z2 116 Jul 26 17:15:18 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 5 z1 118 z2 97 Jul 26 17:16:33 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 18 z1 108 z2 74 As far as I...

...2P or P2MP setting and cables 1 and 2). If I connect phone to ISDN with straight cable it works. I've put quadbri in between, and connected ISDN to span1 in TE mode, and phone in NT mode on span4. Did configuration (added at the end). I get errors: qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error fo...

...nnel on span 1 up % cat /etc/zaptel.con # Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order # Span 1: ztqoz/1/1 "quadBRI PCI ISDN Card 1 Span 1 [TE] (cardID 0)" (MASTER) span=1,1,3,ccs,ami # termtype: te bchan=1-2 dchan=3 # Span 2: ztqoz/1/2 "quadBRI PCI ISDN Card 1 Span 2 [TE] (cardID 0)" span=2,2,0,ccs,ami # termtype: te bchan=4-5 dchan=6 # Span 3: ztqoz/1/3 "quadBRI PCI ISDN Card 1 Span 3 [TE] (cardID 0)" span=3,3,0,ccs...

Hi all, Using Asterisk 1.0.10-BRIstuffed-0.2.0-RC8q with a Junghanns quadBRI (2 spans connected) and a Digium TDM400 for extensions Shouuld I be worried about these lines that keep showing up in my /var/log/messages? qozap: dropped audio card 1 cardid 0 bytes 6 z1 10 z2 116 qozap: dropped audio card 1 cardid 0 bytes 6 z1 50 z2 28 qozap: dropped audio card 1 cardid 0 bytes 6 z1 59 z2 37 .. .... This may or may not be related to a problem I am having with incoming calls. They seem to appear when my incoming calls keep getting dropped as soon as...

...he LED on my card is red when no signal, and well green when there's a signal. Please help! Any hints, advices... anything is welcome. Thank you. cat /proc/zaptel/* (when a line is in, one of them shows ACTIVATED) ================== Span 1: ztqoz/2/1 "quadBRI PCI ISDN Card 1 Span 1 [TE] (cardID 0) Layer 1 DEACTIVATED (F3)" 1 ztqoz2/1/1 Clear (In use) 2 ztqoz2/1/2 Clear (In use) 3 ztqoz2/1/3 HDLCFCS (In use) Span 2: ztqoz/2/2 "quadBRI PCI ISDN Card 1 Span 2 [TE] (cardID 0) Layer 1 DEACTIVATED (F3)" 4 ztqoz2/2/1 Clear (In use)...

...disable_ec: disabled echo cancellation on channel 1 -- Hungup 'Zap/1-1' == Everyone is busy/congested at this time (1:0/0/1) == Auto fallthrough, channel 'OSS/dsp' status is 'CHANUNAVAIL' cat /proc/zap/* Span 1: ztqoz/2/1 "quadBRI PCI ISDN Card 1 Span 1 [NT] (cardID 7) Layer 1 DEACTIVATED (G2)" AMI/CCS 1 ztqoz2/1/1 Clear (In use) 2 ztqoz2/1/2 Clear (In use) 3 ztqoz2/1/3 HDLCFCS (In use) Span 2: ztqoz/2/2 "quadBRI PCI ISDN Card 1 Span 2 [NT] (cardID 7) Layer 1 DEACTIVATED (G2)" AMI/CCS 4 ztqoz2/2/1 Clear (In use) 5 ztq...

...the Voicemail works correct. It correctly goes to "salsa-helpdesk-day", tries to call a number, but this fails. Now and then, a "Unable to forward frame" message is displayed. Also, when looking at /var/log/messages, the messages: "qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 1" "qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2" appear frequently. lsmod lists zaptel and qozap, and not ztdummy, zaphfc, etc. lspci nicely lists the card, and there are no IRQ conflicts. Any ideas? Thanks in advance. (by the way, the telephone num...

I am unable to make quadbri board to work in NT mode, in TE mode it works OK. I have set 5 jumpers to NT mode. Dmesg shows everything OK: qozap: Junghanns.NET quadBRI card configured at mem 0xd084e000 IRQ 9 HZ 100 CardID 1 qozap: S/T ports: 4 [ TE TE TE NT ] qozap: 1 multiBRI card(s) in this box, 4 BRI ports total. from Asterisk side seems to be ok. pri show span 4 Primary D-channel: 12 Status: Provisioned, Up, Active Switchtype: EuroISDN Type: Network (PtMP) Window Length: 135411676/135411612 Sentrej: 135412124...

I'm using 1.9.18p7 with RedHat 2.0.35 ---------------------- /etc/smb.conf contains [global] hosts allow = myhost ------------------------- /etc/lmhosts contains myhost's-IP-address myhost ------------------------------------ smbd and nmbd are run as daemons. When I run smbclient //myhost/tmp, I get 'not listening for calling name', but if I specify hosts allow =

...on major 196 Apr 1 17:51:07 debian kernel: qozap: start Apr 1 17:51:07 debian kernel: PCI: Enabling device 00:0b.0 (0000 -> 0003) Apr 1 17:51:07 debian kernel: PCI: Found IRQ 10 for device 00:0b.0 Apr 1 17:51:07 debian kernel: qozap: quadBRI card configured at mem 0xd0888000 IRQ 10 HZ 100 CardID 0 Apr 1 17:51:07 debian kernel: S/T port 1 is in TE mode. Apr 1 17:51:07 debian kernel: S/T port 2 is in TE mode. Apr 1 17:51:07 debian kernel: S/T port 3 is in TE mode. Apr 1 17:51:07 debian kernel: S/T port 4 is in TE mode. Apr 1 17:51:07 debian kernel: qozap: registered zaptel span 1. Apr...

Hi all, I'm trying to get a junghanns QuadBRI to coexist in the same machine as a Digium TDM400P card (so I can run the ISDN lines in and bridge with analog phones plugged into the TDM). I'm having a problem loading the modules. If I follow the BRIstuff (0.3.0-pre-1l) install method.... it's to modprobe zaptel, then insmod qozap.o I'm on Debian 2.4.31. That works. But then I