search for: octobri

Hello, I recently bought a Junghanns Octobri Card. I have some problems with this card to make outbound calls but I can receive calls. I have 3 lines to PSTN and 3 lines to my existing PBX FRANCE TELECOM <-- OctoBRI --> Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h <-- OctoBRI --> PABX e-Generis <----> ISDN Phones...

Hi, Using Xorcom's bristuff-0.4.0-RC4-xr7.tar.gz (ie asterisk 1.4.25) with an old Junghanns OctoBRI (ie not the 2.0 version), zttool shows every port in TE mode, though half of them are in NT. Alarm column shows OK for every port, such as : OK octoBRI PCI ISDN Card 1 Span 1 [TE] Lay Globally, this system doesn't work (can't dial out through zaptel) Replacing this board wit...

Hi, I mistakenly posted this to Dev list.... I wonder if I use quadbri or octobri cards to insert Asterisk between ISDN PBX and ISDN line - if power of Asterisks fails - will those card connect PBX directly to ISDN line ? If not are there any other simple switching devices, that would do this (in power fail it will connect ISDN PBX to ISDN lines directly) ? Thanks in advance,...

Hi, When typing dahdi_scan on an OctoBRI-enabled setup, I've got only 8 replies such as : [1] active=yes alarms=RED ... [8] active=yes ... framing=CCS I would expect 16 replies (one per B-channel). Is this correct ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/piper...

Hello, In my system, dmesg outputs : [ 13.039788] wcb4xxp 0000:01:0a.0: probe called for b4xx... [ 13.039788] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 13.039788] wcb4xxp 0000:01:0a.0: Identified HFC-8S Junghanns.NET octoBRI PCI (controller rev 1) at 0001dfe0, IRQ 21 [ 13.041202] wcb4xxp 0000:01:0a.0: NOTE: hardware echo cancellation has been disabled [ 13.041477] wcb4xxp 0000:01:0a.0: Port 1: TE mode [ 13.041591] wcb4xxp 0000:01:0a.0: Port 2: NT mode [ 13.044952] wcb4xxp 0000:01:0a.0: Port 3: TE mode [ 13.04...

BUG/SYMPTOMS: 1.Under certain circumstances, octoBRI (and most likely quadBRI) ISDN cards (Junghanns/CologneChip) severely distort certain ISDN payload. 2.Although these claims relate to the bristuff patch, the problem might not be limited to bristuff and in fact be rather asterisk/zaptel/libpri related. 3.Signal distortion is limited to the use...

Hi, Looking at dmesg, I can see : [ 45.213205] wcb4xxp 0000:01:07.0: Span 5 has invalid sync priority (5), removing from sync source list [ 45.213205] wcb4xxp 0000:01:07.0: Span 6 has invalid sync priority (6), removing from sync source list [ 45.213205] wcb4xxp 0000:01:07.0: Span 7 has invalid sync priority (7), removing from sync source list [ 45.213205] wcb4xxp 0000:01:07.0: Span 8 has

...grading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to 1.0.8-BRIstuffed-0.2.0-RCh the same problem occurs, but seems to be more seldom. Attached is now the output of "zap show channel" . - I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs over and over again:...

Hi, In my 1.6.1.18 with dahdi 2.2.1.1, I've got : # dahdi_hardware pci:0000:01:0a.0 qozap- 1397:16b8 Junghanns OctoBRI ISDN card Does it mean I should download and use qozap or is it a bug in Dahdi ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100412/de87e46e/attachment.htm

Hi, I'm pulling my hair down and getting bold :-) ..... I have Asterisk between Panasonic KXTD816 and Euroisdn in Italy (beronet octobri and bristuff Asterisk).... I'm trying to do just plain transfer of call from pbx to ISDN through Asterisk... It seems like PBX hangsup, when call is progressing with no apparent reason. I'd kindly ask for any advice or some working example for this.... On isdn side I also have a problem....

...f building an Asterisk machine and need 5 or 6 BRI-Channels. I was looking for the beroNet and Junghans cards and stumbled upon the Xorcom Astribank xBRI products. Has anybody tried out the Astribank xBRI-Channel Banks? Are they production ready or should I go with a beroNet BN8S0 or JUNGHANNS.NET octoBRI ISDN? Thanks in advance, Lars -- We don't like their sound. Groups of guitars are on the way out. -- Decca Recording Company, turning down the Beatles, 1962

...----------------------------- ; p2p TE mode (for connecting ISDN lines in point-to-point mode) ;signalling = bri_cpe ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) signalling = bri_cpe_ptmp context=isdn-incoming group = 1 ; S/T port 1-3 (first quadBRI, or lower ports of an octoBRI) channel => 1-2 channel => 4-5 channel => 7-8 ;------------------------------------------------------------------- ; p2p NT mode (for connecting an ISDN PBX in point-to-point mode) signalling = bri_net context=pbx-incoming group = 2 ; S/T port 4 (second quadBRI, or upper ports of an o...

...[size=4K] Capabilities: [40] Power Management version 2 Kernel driver in use: wcb4xxp Kernel modules: wcb4xxp, hfcmulti bishop dahdi # dahdi_hardware -v driver should be 'qozap' but is actually 'wcb4xxp' pci:0000:01:00.0 qozap+ 1397:16b8 Junghanns OctoBRI ISDN card Completely confused: Clairet

Dear All, I am using Asterisk CVS-HEAD-05/05/05-15:46:09, and found it using up 99% of cpu 6-8 times in a day, even when its doing nothing or even if it is, its not supposed to eat all the cpu. whenever this happens, I need to stop it by issueing "stop now" 15-20 times on CLI or kill the process, then start over. Please suggest what to do. regards, Umair bari

Hi! We planing to by some PRI/BRI equipment to replace our existing telephone system. So I am going to try this: ISDN Card Outgoing Digital Call / Capability: Unrestricted digital information -> octobri -> asterisk -> TE410E -> Internet Provider / Receiver for Capability Unrestricted digital information The question is: Is asterisk possible of transmit this digital call to the destination and what is needed to achieve this? I found out that a variable called CALLTYPE exists, but I could...

Hi all, I have made (S)RPMS of cvs STABLE & HEAD and several other apps and put them online at http://www.laimbock.com/asterisk/ The cvs STABLE RPMS support udev, Eicon Diva Server cards, HFC-S based ISDN cards, QuadBRI and OctoBRI ISDN cards from Junghanns.net and SpanDSP for sending & receiving faxes. The sample files are also included and are put in /etc/asterisk-1.0cvs<date>_samples so they don't interfere with your configs in /etc/asterisk. The cvs HEAD RPMS do not support HFC-S based ISDN cards, QuadBRI a...

...llo, I've got a running system in which logs are full of messages such as: [Jun 10 07:24:14] NOTICE[2414] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 The strange thing is those messages are coming from a single span. My setup is : Asterisk 1.6.1.18 Junghanns OctoBRI with wcb4xxp driver libpri 1.4.10.2 dahdi 2.3.0 3 BRI lines in PtMP mode What does this "PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2" roughly mean ? Why could it happen on a single port and not on the others ? Regards -------------- next part -------------- An HTML a...

Hi, I'll soon replace a Junghanns OctoBRI with a Junghanns QuadBRI. As both use wcb4xxp driver (dahdi 2.3.0, libpri 1.4.10.2 and asterisk 1.6.1), I'm planning to proceed this way : 1. Edit 2 versions of files /etc/dahdi/system.conf and /etc/asterisk/dahdi-channels.conf (one for each card). 2. Link current system.conf and dahdi-channel...

Hi Folks, First of all, I've been reading a lot and a lot about asterisk and ISDN-BRI, but is really a complicated world, not like PRI or Analog. I have 2 offices with 2 NT boxes and I want to connect them with Asterisk to route outgoing from one office two the other. At the end I want them to look like this Office2 will have only VoIP phones (not ISDN phones connected to a card in asterisk)

Hi there, our old pbx contract will expire soon and we have now 2 pbx companies trying hard to sell us a new VoIP one. I am usually a friend of open source software and read about the Asterisk poject, but I can not assess if Asterisk fulfills all our requirements. It would be great to receive some input from experienced users to be able to convince our management. My question is if the