Hello,
Does anyone know how to conference a call on the SNOM 200 phone? Whenever I
push the cnf/tran button it just hangs up on the active call. The manual says
you have to push the cnf function key but it doesn't appear in the lcd on my
phone.
Thanks
-Matt
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040909/7233b80b/attachment.htm
On Thu, 9 Sep 2004, Matt - Telcom Products wrote:> Hello, > Does anyone know how to conference a call on the SNOM 200 phone? >Whenever I push the cnf/tran button it just hangs up on the active call. >The manual says you have to push the cnf function key but it doesn't >appear in the lcd on my phone. > Thanks > -MattFirst, update to the following firmware: http://www.snom.com/download/share/snom200-3.49-SIP.bin Second, the cnf hard button doesn't work. Use the SOFT key that shows up on the LCD that says "Cnf On". I.E. put the first party on hold, call the second party, and after they answer the "Cnf On" button will appear in the LCD. Or, you can just Xfer both parties to a MeetMe and call into it yourself. I do this a lot. -- Vice President of N2Net, a New Age Consulting Service, Inc. Company http://www.n2net.net Where everything clicks into place! KP-216-121-ST
Hi, I have a Snom 200 and also cannot get the conferencing to work. Transfering isn't a problem, including attended xfr. Sven could you expand on what you mean by "Don't use low rate codecs !" I have tried u-law and G792a and neither appear to make any difference. Also I am currently running Snom build snom200-2.04g-SIP.bin as when I tried the latest 3.xx beta build I found that the MWI (voicemail) button would stay on no matter if all the voicemails had been deleted. Was wondering if you have the same issue? Cheers alex ---SNIPPED--- -----Original Message----- From: Sven Fischer (support) [mailto:fischer@snom.de] Sent: 01 October 2004 08:53 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] SNOM 200 can't conference. Don't use low rate codecs ! Regards, Sven Dear Friends of Ubiquity Software: As you may have noticed, Ubiquity Software began using the web domain ubiquity.com earlier this year in addition to the previously established ubiquity.net for our website and email communications to you. However, since that time, a dispute has emerged with respect to actual ownership of the ubiquity.com domain. As an international software company founded over decade ago, you can always reach Ubiquity Software under the website www.ubiquity.net <http://www.ubiquity.net/> and via email at @ubiquity.net. However, we have also chosen to expand our domain to the more specific www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and @ubiquitysoftware.com for email communications. Please use either the historical ubiquity.net or begin to use the new ubiquitysoftware.com domain for all email communications to Ubiquity employees from now on. Thank you. Regards, Ubiquity Software www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> info@ubiquitysoftware.com
Update: I have installed the firmware you suggested (http://www.snom.com/download/share/snom200-3.49-SIP.bin). The MWI appears to be fixed in this build so I will be sticking with that, thanks for that. However still no joy on the conferencing front. I have looked at the Snom 200 user guide but when I have someone on hold and another person active the soft button says "HeadRJ" and not "Conf.On" as it mentions in the user guide. I am only able to try this with a Pingtel hardphone and a Optipoint 400 as I don't have any other SIP phones on my desk at the moment. Could this have something to do with the other phones not being Snom ???? Any hints or advice would be greatly appreciated. Alex -----Original Message----- From: Alex Barnes Sent: 01 October 2004 10:09 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] SNOM 200 can't conference. Hi, I have a Snom 200 and also cannot get the conferencing to work. Transfering isn't a problem, including attended xfr. Sven could you expand on what you mean by "Don't use low rate codecs !" I have tried u-law and G792a and neither appear to make any difference. Also I am currently running Snom build snom200-2.04g-SIP.bin as when I tried the latest 3.xx beta build I found that the MWI (voicemail) button would stay on no matter if all the voicemails had been deleted. Was wondering if you have the same issue? Cheers alex ---SNIPPED--- -----Original Message----- From: Sven Fischer (support) [mailto:fischer@snom.de] Sent: 01 October 2004 08:53 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] SNOM 200 can't conference. Don't use low rate codecs ! Regards, Sven Dear Friends of Ubiquity Software: As you may have noticed, Ubiquity Software began using the web domain ubiquity.com earlier this year in addition to the previously established ubiquity.net for our website and email communications to you. However, since that time, a dispute has emerged with respect to actual ownership of the ubiquity.com domain. As an international software company founded over decade ago, you can always reach Ubiquity Software under the website www.ubiquity.net <http://www.ubiquity.net/> and via email at @ubiquity.net. However, we have also chosen to expand our domain to the more specific www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and @ubiquitysoftware.com for email communications. Please use either the historical ubiquity.net or begin to use the new ubiquitysoftware.com domain for all email communications to Ubiquity employees from now on. Thank you. Regards, Ubiquity Software www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> info@ubiquitysoftware.com
Has always said "MWI" on the middle soft button when there was new
voice
mail waiting. What firmware are you using?
BTW that firmware has also fixed the MWI button going straight to the
correct mailbox (doesn't reqire the user to enter the mailbox number).
Need the following in your extensions.conf (do not change the
"asterisk"
bit as that is hardcoded in the Snom phone, I believe):
exten => asterisk,1,VoiceMailMain(${CALLERIDNUM})
-----Original Message-----
From: steve szmidt [mailto:steve@szmidt.org]
Sent: 01 October 2004 11:29
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] SNOM 200 can't conference.
On Friday 01 October 2004 06:12 am, Alex Barnes wrote:> Update:
>
> I have installed the firmware you suggested
> (http://www.snom.com/download/share/snom200-3.49-SIP.bin).
>
> The MWI appears to be fixed in this build so I will be sticking with
> that, thanks for that.
Are you saying it says MWI now and not VMail anymore?
--
Steve Szmidt
"They that would give up essential liberty for temporary safety
deserve neither liberty nor safety."
Benjamin Franklin
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Dear Friends of Ubiquity Software:
As you may have noticed, Ubiquity Software began using the web domain
ubiquity.com earlier this year in addition to the previously established
ubiquity.net for our website and email communications to you. However, since
that time, a dispute has emerged with respect to actual ownership of the
ubiquity.com domain.
As an international software company founded over decade ago, you can always
reach Ubiquity Software under the website www.ubiquity.net
<http://www.ubiquity.net/> and via email at @ubiquity.net. However, we
have also chosen to expand our domain to the more specific
www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and
@ubiquitysoftware.com for email communications.
Please use either the historical ubiquity.net or begin to use the new
ubiquitysoftware.com domain for all email communications to Ubiquity employees
from now on.
Thank you.
Regards,
Ubiquity Software
www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/>
info@ubiquitysoftware.com
Thanks a lot for the help Sven. I added: disallow=all allow=ulaw to the Pingtel and Optipoint 400 sip peers. And bingo the conference button appeared as if by magic. Please pass on my congrats on a cracking phone. Its way out in front of the other SIP phones I tested (considering price to performance) and is looking good for all my future roll-outs. Thanks alex -----Original Message----- From: Sven Fischer (support) [mailto:fischer@snom.de] Sent: 01 October 2004 11:41 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] SNOM 200 can't conference. On Friday 01 October 2004 11:09, Alex Barnes wrote:> Hi, > > I have a Snom 200 and also cannot get the conferencing to work. > Transfering isn't a problem, including attended xfr. > > Sven could you expand on what you mean by "Don't use low rate codecs > !" I have tried u-law and G792a and neither appear to make any > difference.That does mean that the snom phone can only host a 3 party conference in case of not using low rate codecs ! So have a look into the SIP trace and find out what codecs are really used for your two test calls you want to join in a conference ! Sven> > Also I am currently running Snom build snom200-2.04g-SIP.bin as when I > tried the latest 3.xx beta build I found that the MWI (voicemail) > button would stay on no matter if all the voicemails had been deleted. > Was wondering if you have the same issue? > > Cheers > > alex > > > ---SNIPPED--- > > -----Original Message----- > From: Sven Fischer (support) [mailto:fischer@snom.de] > Sent: 01 October 2004 08:53 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] SNOM 200 can't conference. > > Don't use low rate codecs ! > > Regards, > > Sven > > > Dear Friends of Ubiquity Software: > > As you may have noticed, Ubiquity Software began using the web domain > ubiquity.com earlier this year in addition to the previously > established ubiquity.net for our website and email communications to > you. However, since that time, a dispute has emerged with respect to > actual ownership of the ubiquity.com domain. > > As an international software company founded over decade ago, you can > always reach Ubiquity Software under the website www.ubiquity.net > <http://www.ubiquity.net/> and via email at @ubiquity.net. However, > we have also chosen to expand our domain to the more specific > www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web > and @ubiquitysoftware.com for email communications. > > Please use either the historical ubiquity.net or begin to use the new > ubiquitysoftware.com domain for all email communications to Ubiquity > employees from now on. > > Thank you. > > Regards, > > Ubiquity Software > www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> > info@ubiquitysoftware.com > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- ----------------------------------------------------------------------- See our FAQs at: http://www.snom.com/faq_en.php ----------------------------------------------------------------------- Participate in our special offers for a snom 4S SIP Registrar/Proxy SME Version! For further information contact: sales@snom.de ! ----------------------------------------------------------------------- snom technology AG Pascalstra?e 10b D-10587 Berlin Sven Fischer fax +49 30 39833111 mailto:support@snom.de http://www.snom.com sip:sf@snom.com ----------------------------------------------------------------------- _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of cveazey@blackhillsfiber.com Sent: Friday, October 01, 2004 4:45 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] SNOM 200 can't conference. asterisk-users-bounces@lists.digium.com wrote on 10/01/2004 04:12:02 AM:> Update: > > I have installed the firmware you suggested > (http://www.snom.com/download/share/snom200-3.49-SIP.bin). > > The MWI appears to be fixed in this build so I will be sticking with > that, thanks for that. > > However still no joy on the conferencing front. I have looked at the > Snom 200 user guide but when I have someone on hold and another person > active the soft button says "HeadRJ" and not "Conf.On" as it mentions in > the user guide. > > I am only able to try this with a Pingtel hardphone and a Optipoint 400 > as I don't have any other SIP phones on my desk at the moment. Could > this have something to do with the other phones not being Snom ???? > > Any hints or advice would be greatly appreciated. > > Alex > > -----Original Message----- > From: Alex Barnes > Sent: 01 October 2004 10:09 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] SNOM 200 can't conference. > > > Hi, > > I have a Snom 200 and also cannot get the conferencing to work. > Transfering isn't a problem, including attended xfr. > > Sven could you expand on what you mean by "Don't use low rate codecs !" > I have tried u-law and G792a and neither appear to make any difference. > > Also I am currently running Snom build snom200-2.04g-SIP.bin as when I > tried the latest 3.xx beta build I found that the MWI (voicemail) button > would stay on no matter if all the voicemails had been deleted. Was > wondering if you have the same issue? > > Cheers > > alex > > > ---SNIPPED--- > > -----Original Message----- > From: Sven Fischer (support) [mailto:fischer@snom.de] > Sent: 01 October 2004 08:53 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] SNOM 200 can't conference. > > Don't use low rate codecs ! > > Regards, > > Sven > > > Dear Friends of Ubiquity Software: > > As you may have noticed, Ubiquity Software began using the web > domain ubiquity.com earlier this year in addition to the previously > established ubiquity.net for our website and email communications to > you. However, since that time, a dispute has emerged with respect > to actual ownership of the ubiquity.com domain. > > As an international software company founded over decade ago, you > can always reach Ubiquity Software under the website www.ubiquity.net < > http://www.ubiquity.net/> and via email at @ubiquity.net. However, > we have also chosen to expand our domain to the more specific www. > ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and > @ubiquitysoftware.com for email communications. > > Please use either the historical ubiquity.net or begin to use the > new ubiquitysoftware.com domain for all email communications to > Ubiquity employees from now on. > > Thank you. > > Regards, > > Ubiquity Software > www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> > info@ubiquitysoftware.com > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-usersAlex, When I had the same conferencing problem, Snom told me that the 200 doesn't have enough horsepower to do conferencing with codecs other than g711uLaw. Take out your GSM or g729 in each Snom200 sip.conf context and you will be able to see the "Cnf.On" show up. chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041206/f636f729/attachment.htm
-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of cveazey@blackhillsfiber.com Sent: Friday, October 01, 2004 4:45 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] SNOM 200 can't conference. asterisk-users-bounces@lists.digium.com wrote on 10/01/2004 04:12:02 AM:> Update: > > I have installed the firmware you suggested > (http://www.snom.com/download/share/snom200-3.49-SIP.bin). > > The MWI appears to be fixed in this build so I will be sticking with > that, thanks for that. > > However still no joy on the conferencing front. I have looked at the > Snom 200 user guide but when I have someone on hold and another person > active the soft button says "HeadRJ" and not "Conf.On" as it mentions in > the user guide. > > I am only able to try this with a Pingtel hardphone and a Optipoint 400 > as I don't have any other SIP phones on my desk at the moment. Could > this have something to do with the other phones not being Snom ???? > > Any hints or advice would be greatly appreciated. > > Alex > > -----Original Message----- > From: Alex Barnes > Sent: 01 October 2004 10:09 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] SNOM 200 can't conference. > > > Hi, > > I have a Snom 200 and also cannot get the conferencing to work. > Transfering isn't a problem, including attended xfr. > > Sven could you expand on what you mean by "Don't use low rate codecs !" > I have tried u-law and G792a and neither appear to make any difference. > > Also I am currently running Snom build snom200-2.04g-SIP.bin as when I > tried the latest 3.xx beta build I found that the MWI (voicemail) button > would stay on no matter if all the voicemails had been deleted. Was > wondering if you have the same issue? > > Cheers > > alex > > > ---SNIPPED--- > > -----Original Message----- > From: Sven Fischer (support) [mailto:fischer@snom.de] > Sent: 01 October 2004 08:53 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] SNOM 200 can't conference. > > Don't use low rate codecs ! > > Regards, > > Sven > > > Dear Friends of Ubiquity Software: > > As you may have noticed, Ubiquity Software began using the web > domain ubiquity.com earlier this year in addition to the previously > established ubiquity.net for our website and email communications to > you. However, since that time, a dispute has emerged with respect > to actual ownership of the ubiquity.com domain. > > As an international software company founded over decade ago, you > can always reach Ubiquity Software under the website www.ubiquity.net < > http://www.ubiquity.net/> and via email at @ubiquity.net. However, > we have also chosen to expand our domain to the more specific www. > ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and > @ubiquitysoftware.com for email communications. > > Please use either the historical ubiquity.net or begin to use the > new ubiquitysoftware.com domain for all email communications to > Ubiquity employees from now on. > > Thank you. > > Regards, > > Ubiquity Software > www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> > info@ubiquitysoftware.com > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-usersAlex, When I had the same conferencing problem, Snom told me that the 200 doesn't have enough horsepower to do conferencing with codecs other than g711uLaw. Take out your GSM or g729 in each Snom200 sip.conf context and you will be able to see the "Cnf.On" show up. chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041206/2dbacfbe/attachment.htm
-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of cveazey@blackhillsfiber.com Sent: Friday, October 01, 2004 4:45 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] SNOM 200 can't conference. asterisk-users-bounces@lists.digium.com wrote on 10/01/2004 04:12:02 AM:> Update: > > I have installed the firmware you suggested > (http://www.snom.com/download/share/snom200-3.49-SIP.bin). > > The MWI appears to be fixed in this build so I will be sticking with > that, thanks for that. > > However still no joy on the conferencing front. I have looked at the > Snom 200 user guide but when I have someone on hold and another person > active the soft button says "HeadRJ" and not "Conf.On" as it mentions in > the user guide. > > I am only able to try this with a Pingtel hardphone and a Optipoint 400 > as I don't have any other SIP phones on my desk at the moment. Could > this have something to do with the other phones not being Snom ???? > > Any hints or advice would be greatly appreciated. > > Alex > > -----Original Message----- > From: Alex Barnes > Sent: 01 October 2004 10:09 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] SNOM 200 can't conference. > > > Hi, > > I have a Snom 200 and also cannot get the conferencing to work. > Transfering isn't a problem, including attended xfr. > > Sven could you expand on what you mean by "Don't use low rate codecs !" > I have tried u-law and G792a and neither appear to make any difference. > > Also I am currently running Snom build snom200-2.04g-SIP.bin as when I > tried the latest 3.xx beta build I found that the MWI (voicemail) button > would stay on no matter if all the voicemails had been deleted. Was > wondering if you have the same issue? > > Cheers > > alex > > > ---SNIPPED--- > > -----Original Message----- > From: Sven Fischer (support) [mailto:fischer@snom.de] > Sent: 01 October 2004 08:53 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] SNOM 200 can't conference. > > Don't use low rate codecs ! > > Regards, > > Sven > > > Dear Friends of Ubiquity Software: > > As you may have noticed, Ubiquity Software began using the web > domain ubiquity.com earlier this year in addition to the previously > established ubiquity.net for our website and email communications to > you. However, since that time, a dispute has emerged with respect > to actual ownership of the ubiquity.com domain. > > As an international software company founded over decade ago, you > can always reach Ubiquity Software under the website www.ubiquity.net < > http://www.ubiquity.net/> and via email at @ubiquity.net. However, > we have also chosen to expand our domain to the more specific www. > ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and > @ubiquitysoftware.com for email communications. > > Please use either the historical ubiquity.net or begin to use the > new ubiquitysoftware.com domain for all email communications to > Ubiquity employees from now on. > > Thank you. > > Regards, > > Ubiquity Software > www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> > info@ubiquitysoftware.com > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-usersAlex, When I had the same conferencing problem, Snom told me that the 200 doesn't have enough horsepower to do conferencing with codecs other than g711uLaw. Take out your GSM or g729 in each Snom200 sip.conf context and you will be able to see the "Cnf.On" show up. chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041206/d5a56132/attachment.htm
-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of cveazey@blackhillsfiber.com Sent: Friday, October 01, 2004 4:45 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] SNOM 200 can't conference. asterisk-users-bounces@lists.digium.com wrote on 10/01/2004 04:12:02 AM:> Update: > > I have installed the firmware you suggested > (http://www.snom.com/download/share/snom200-3.49-SIP.bin). > > The MWI appears to be fixed in this build so I will be sticking with > that, thanks for that. > > However still no joy on the conferencing front. I have looked at the > Snom 200 user guide but when I have someone on hold and another person > active the soft button says "HeadRJ" and not "Conf.On" as it mentions in > the user guide. > > I am only able to try this with a Pingtel hardphone and a Optipoint 400 > as I don't have any other SIP phones on my desk at the moment. Could > this have something to do with the other phones not being Snom ???? > > Any hints or advice would be greatly appreciated. > > Alex > > -----Original Message----- > From: Alex Barnes > Sent: 01 October 2004 10:09 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] SNOM 200 can't conference. > > > Hi, > > I have a Snom 200 and also cannot get the conferencing to work. > Transfering isn't a problem, including attended xfr. > > Sven could you expand on what you mean by "Don't use low rate codecs !" > I have tried u-law and G792a and neither appear to make any difference. > > Also I am currently running Snom build snom200-2.04g-SIP.bin as when I > tried the latest 3.xx beta build I found that the MWI (voicemail) button > would stay on no matter if all the voicemails had been deleted. Was > wondering if you have the same issue? > > Cheers > > alex > > > ---SNIPPED--- > > -----Original Message----- > From: Sven Fischer (support) [mailto:fischer@snom.de] > Sent: 01 October 2004 08:53 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] SNOM 200 can't conference. > > Don't use low rate codecs ! > > Regards, > > Sven > > > Dear Friends of Ubiquity Software: > > As you may have noticed, Ubiquity Software began using the web > domain ubiquity.com earlier this year in addition to the previously > established ubiquity.net for our website and email communications to > you. However, since that time, a dispute has emerged with respect > to actual ownership of the ubiquity.com domain. > > As an international software company founded over decade ago, you > can always reach Ubiquity Software under the website www.ubiquity.net < > http://www.ubiquity.net/> and via email at @ubiquity.net. However, > we have also chosen to expand our domain to the more specific www. > ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and > @ubiquitysoftware.com for email communications. > > Please use either the historical ubiquity.net or begin to use the > new ubiquitysoftware.com domain for all email communications to > Ubiquity employees from now on. > > Thank you. > > Regards, > > Ubiquity Software > www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> > info@ubiquitysoftware.com > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-usersAlex, When I had the same conferencing problem, Snom told me that the 200 doesn't have enough horsepower to do conferencing with codecs other than g711uLaw. Take out your GSM or g729 in each Snom200 sip.conf context and you will be able to see the "Cnf.On" show up. chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041206/f3f33b3e/attachment.htm
-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of cveazey@blackhillsfiber.com Sent: Friday, October 01, 2004 4:45 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] SNOM 200 can't conference. asterisk-users-bounces@lists.digium.com wrote on 10/01/2004 04:12:02 AM:> Update: > > I have installed the firmware you suggested > (http://www.snom.com/download/share/snom200-3.49-SIP.bin). > > The MWI appears to be fixed in this build so I will be sticking with > that, thanks for that. > > However still no joy on the conferencing front. I have looked at the > Snom 200 user guide but when I have someone on hold and another person > active the soft button says "HeadRJ" and not "Conf.On" as it mentions in > the user guide. > > I am only able to try this with a Pingtel hardphone and a Optipoint 400 > as I don't have any other SIP phones on my desk at the moment. Could > this have something to do with the other phones not being Snom ???? > > Any hints or advice would be greatly appreciated. > > Alex > > -----Original Message----- > From: Alex Barnes > Sent: 01 October 2004 10:09 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] SNOM 200 can't conference. > > > Hi, > > I have a Snom 200 and also cannot get the conferencing to work. > Transfering isn't a problem, including attended xfr. > > Sven could you expand on what you mean by "Don't use low rate codecs !" > I have tried u-law and G792a and neither appear to make any difference. > > Also I am currently running Snom build snom200-2.04g-SIP.bin as when I > tried the latest 3.xx beta build I found that the MWI (voicemail) button > would stay on no matter if all the voicemails had been deleted. Was > wondering if you have the same issue? > > Cheers > > alex > > > ---SNIPPED--- > > -----Original Message----- > From: Sven Fischer (support) [mailto:fischer@snom.de] > Sent: 01 October 2004 08:53 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] SNOM 200 can't conference. > > Don't use low rate codecs ! > > Regards, > > Sven > > > Dear Friends of Ubiquity Software: > > As you may have noticed, Ubiquity Software began using the web > domain ubiquity.com earlier this year in addition to the previously > established ubiquity.net for our website and email communications to > you. However, since that time, a dispute has emerged with respect > to actual ownership of the ubiquity.com domain. > > As an international software company founded over decade ago, you > can always reach Ubiquity Software under the website www.ubiquity.net < > http://www.ubiquity.net/> and via email at @ubiquity.net. However, > we have also chosen to expand our domain to the more specific www. > ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and > @ubiquitysoftware.com for email communications. > > Please use either the historical ubiquity.net or begin to use the > new ubiquitysoftware.com domain for all email communications to > Ubiquity employees from now on. > > Thank you. > > Regards, > > Ubiquity Software > www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> > info@ubiquitysoftware.com > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-usersAlex, When I had the same conferencing problem, Snom told me that the 200 doesn't have enough horsepower to do conferencing with codecs other than g711uLaw. Take out your GSM or g729 in each Snom200 sip.conf context and you will be able to see the "Cnf.On" show up. chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041206/82f2afd5/attachment.htm
-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of cveazey@blackhillsfiber.com Sent: Friday, October 01, 2004 4:45 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] SNOM 200 can't conference. asterisk-users-bounces@lists.digium.com wrote on 10/01/2004 04:12:02 AM:> Update: > > I have installed the firmware you suggested > (http://www.snom.com/download/share/snom200-3.49-SIP.bin). > > The MWI appears to be fixed in this build so I will be sticking with > that, thanks for that. > > However still no joy on the conferencing front. I have looked at the > Snom 200 user guide but when I have someone on hold and another person > active the soft button says "HeadRJ" and not "Conf.On" as it mentions in > the user guide. > > I am only able to try this with a Pingtel hardphone and a Optipoint 400 > as I don't have any other SIP phones on my desk at the moment. Could > this have something to do with the other phones not being Snom ???? > > Any hints or advice would be greatly appreciated. > > Alex > > -----Original Message----- > From: Alex Barnes > Sent: 01 October 2004 10:09 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] SNOM 200 can't conference. > > > Hi, > > I have a Snom 200 and also cannot get the conferencing to work. > Transfering isn't a problem, including attended xfr. > > Sven could you expand on what you mean by "Don't use low rate codecs !" > I have tried u-law and G792a and neither appear to make any difference. > > Also I am currently running Snom build snom200-2.04g-SIP.bin as when I > tried the latest 3.xx beta build I found that the MWI (voicemail) button > would stay on no matter if all the voicemails had been deleted. Was > wondering if you have the same issue? > > Cheers > > alex > > > ---SNIPPED--- > > -----Original Message----- > From: Sven Fischer (support) [mailto:fischer@snom.de] > Sent: 01 October 2004 08:53 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] SNOM 200 can't conference. > > Don't use low rate codecs ! > > Regards, > > Sven > > > Dear Friends of Ubiquity Software: > > As you may have noticed, Ubiquity Software began using the web > domain ubiquity.com earlier this year in addition to the previously > established ubiquity.net for our website and email communications to > you. However, since that time, a dispute has emerged with respect > to actual ownership of the ubiquity.com domain. > > As an international software company founded over decade ago, you > can always reach Ubiquity Software under the website www.ubiquity.net < > http://www.ubiquity.net/> and via email at @ubiquity.net. However, > we have also chosen to expand our domain to the more specific www. > ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and > @ubiquitysoftware.com for email communications. > > Please use either the historical ubiquity.net or begin to use the > new ubiquitysoftware.com domain for all email communications to > Ubiquity employees from now on. > > Thank you. > > Regards, > > Ubiquity Software > www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> > info@ubiquitysoftware.com > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-usersAlex, When I had the same conferencing problem, Snom told me that the 200 doesn't have enough horsepower to do conferencing with codecs other than g711uLaw. Take out your GSM or g729 in each Snom200 sip.conf context and you will be able to see the "Cnf.On" show up. chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041206/53c70ba1/attachment.htm
-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of cveazey@blackhillsfiber.com Sent: Friday, October 01, 2004 4:45 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] SNOM 200 can't conference. asterisk-users-bounces@lists.digium.com wrote on 10/01/2004 04:12:02 AM:> Update: > > I have installed the firmware you suggested > (http://www.snom.com/download/share/snom200-3.49-SIP.bin). > > The MWI appears to be fixed in this build so I will be sticking with > that, thanks for that. > > However still no joy on the conferencing front. I have looked at the > Snom 200 user guide but when I have someone on hold and another person > active the soft button says "HeadRJ" and not "Conf.On" as it mentions in > the user guide. > > I am only able to try this with a Pingtel hardphone and a Optipoint 400 > as I don't have any other SIP phones on my desk at the moment. Could > this have something to do with the other phones not being Snom ???? > > Any hints or advice would be greatly appreciated. > > Alex > > -----Original Message----- > From: Alex Barnes > Sent: 01 October 2004 10:09 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] SNOM 200 can't conference. > > > Hi, > > I have a Snom 200 and also cannot get the conferencing to work. > Transfering isn't a problem, including attended xfr. > > Sven could you expand on what you mean by "Don't use low rate codecs !" > I have tried u-law and G792a and neither appear to make any difference. > > Also I am currently running Snom build snom200-2.04g-SIP.bin as when I > tried the latest 3.xx beta build I found that the MWI (voicemail) button > would stay on no matter if all the voicemails had been deleted. Was > wondering if you have the same issue? > > Cheers > > alex > > > ---SNIPPED--- > > -----Original Message----- > From: Sven Fischer (support) [mailto:fischer@snom.de] > Sent: 01 October 2004 08:53 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] SNOM 200 can't conference. > > Don't use low rate codecs ! > > Regards, > > Sven > > > Dear Friends of Ubiquity Software: > > As you may have noticed, Ubiquity Software began using the web > domain ubiquity.com earlier this year in addition to the previously > established ubiquity.net for our website and email communications to > you. However, since that time, a dispute has emerged with respect > to actual ownership of the ubiquity.com domain. > > As an international software company founded over decade ago, you > can always reach Ubiquity Software under the website www.ubiquity.net < > http://www.ubiquity.net/> and via email at @ubiquity.net. However, > we have also chosen to expand our domain to the more specific www. > ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and > @ubiquitysoftware.com for email communications. > > Please use either the historical ubiquity.net or begin to use the > new ubiquitysoftware.com domain for all email communications to > Ubiquity employees from now on. > > Thank you. > > Regards, > > Ubiquity Software > www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> > info@ubiquitysoftware.com > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-usersAlex, When I had the same conferencing problem, Snom told me that the 200 doesn't have enough horsepower to do conferencing with codecs other than g711uLaw. Take out your GSM or g729 in each Snom200 sip.conf context and you will be able to see the "Cnf.On" show up. chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041206/4ff5a99d/attachment.htm