Thanks for the reply Leo, much appreciated.
Actually turned out to be a combination of em_w signalling and putting a flash
after the dial in extentions.conf (thanks to hmodes).
In case anyone else finds themselves in a simliar conundrum, configs are below:
zaptel.conf -
---------
span=1,2,0,d4,ami
e&m=1-24
span=2,2,0,d4,ami
e&m=25-48
span=3,2,0,d4,ami
e&m=49-72
span=4,2,0,d4,ami
e&m=73-96
loadzone = us
defaultzone=us
---------
zapata.conf -
---------
[channels]
group=1
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
context=pri
signalling=em_w
channel => 1-96
---------
extensions.conf -
---------
exten => 9000,1,Dial(Zap/g1)
exten => 9000,2,Flash
---------
Softphones / ata / 7960 can all dial in and access the IVR app.
Thanks folks,
-- Cy
On Tue, 29 Jun 2004, Leo Ann Boon wrote:
>Cy,
>
>Are you using robbed bit T1 or T1 PRI? If robbed bit T1, you should need
>to add the following line to /etc/zaptel.conf
>
>fxols=1-24
>
>1-24 is for the 24 channels on the first T1.
>
>In /etc/asterisk/zapata.conf, you need the corresponding:
>signalling=fxo_ls
>channel =>> 1-24
>
>I'm not totally sure this is entirely correct, since we don't use T1
on
>my side of the world.
>
>
>Cybr0t McWhulf wrote:
>
>>Basically, have an old IVR application running under Apex's Omnivox
software on a box with 4 old intel dialogic D240SCs, and would like to allow
remote clients to gain access to aforementioned IVR application via softphone,
7960, ata, etc via asterisk with a TE410P.
>>
>>Unfortunately, all I know about the dialogics is that they're
configured for D4/AMI, which I believe I have configured right in zaptel.conf:
>>
>>"span=1,2,0,d4,ami", etc, etc
>>
>>All spans show green with crossover T1s, but no matter what I try, I get
"Unable to create channel of type 'Zap'" whenever I try to
dial out of the TE410P. I've tried various signalling types in zaptel.conf
and zapata.conf (pri_cpe, pri_net, em_w), but to no avail.
>>
>>Also unfortunately, I'm rather newbish to asterisk as well as telco
on the whole.
>>
>>Does anyone have any suggestions or tips? The online documentation is..
lacking, to say the least.
>>
>>Thanks in advance,
>>
>> -- Cy
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users@lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>