Sam Mulvey
2012-Nov-16 12:45 UTC
Hard reset on starting HVM dom0, multiple kernels, distros, xen versions
Hello! Bit at my wits end here, sorry if I seem disjointed. There''s not a whole lot else to say in this case, I''ll include what info I have, but the serial console doesn''t spit anything out after I start the HVM, and there isn''t a lot of logging. I''m attempting to start a Windows ISO, or a debian-based Linux one. So far I''ve tried: Arch Linux, Xen 4.2.0 Fedora 17, Xen 4.1.3 Ubuntu 12.10, Xen 4.1.3 XCP 1.6 beta (which appears to work) The XCP system works, and I managed to install a windows 2k8 ISO by ssh''ing in and using xl. Everything else, I start the HVM and somewhere between immediately and 10 seconds, I get a hard reset with nothing coming out of the serial console. I''m thinking it''s a kernel interaction problem, or I''m doing something ridiculous and not noticing it, as often happens. I''ve tried recent 3.0, 3.5, and 3.6.6 kernels. Since I''ve tried Ubuntu most recently, here''s what I got from there, but if I should use something else, please let me know. ==== xl dmesg === (XEN) Xen version 4.1.3 (Ubuntu 4.1.3-3ubuntu1) (stefan.bader@canonical.com) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) Tue Oct 2 09:33:57 UTC 2012 (XEN) Bootloader: SYSLINUX 4.06 2012-10-23 (XEN) Command line: dom0_mem=max:4G loglvl=all guest_loglvl=all com1=115200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 3 MBR signatures (XEN) Found 3 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f800 (usable) (XEN) 000000000009f800 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000afdf0000 (usable) (XEN) 00000000afdf0000 - 00000000afdf3000 (ACPI NVS) (XEN) 00000000afdf3000 - 00000000afe00000 (ACPI data) (XEN) 00000000afe00000 - 00000000aff00000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 000000082f000000 (usable) (XEN) ACPI: RSDP 000F7860, 0014 (r0 GBT ) (XEN) ACPI: RSDT AFDF3000, 0040 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: FACP AFDF3080, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: DSDT AFDF3100, 683B (r1 GBT GBTUACPI 1000 MSFT 3000000) (XEN) ACPI: FACS AFDF0000, 0040 (XEN) ACPI: MSDM AFDF9A00, 0055 (r3 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: HPET AFDF9A80, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) (XEN) ACPI: MCFG AFDF9AC0, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: TAMG AFDF9B00, 0022 (r1 GBT GBT B0 5455312E BG 101) (XEN) ACPI: APIC AFDF9940, 00BC (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: SSDT AFDF9BA0, 1158 (r1 AMD POWERNOW 1 AMD 1) (XEN) System RAM: 32237MB (33011260kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-000000082f000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f5e30 (XEN) DMI 2.4 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x4008 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[4004,0], pm1x_evt[4000,0] (XEN) ACPI: wakeup_vec[afdf000c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 5:2 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 5:2 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 5:2 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) (XEN) Processor #3 5:2 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) (XEN) Processor #4 5:2 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) (XEN) Processor #5 5:2 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x10b9a201 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Table is not found! (XEN) Using ACPI (MADT) for SMP configuration information (XEN) IRQ limits: 24 GSI, 1144 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3515.589 MHz processor. (XEN) Initing memory sharing. (XEN) AMD Fam15h machine check reporting enabled (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 64 KiB. (XEN) HVM: ASIDs enabled. (XEN) SVM: Supported advanced features: (XEN) - Nested Page Tables (NPT) (XEN) - Last Branch Record (LBR) Virtualisation (XEN) - Next-RIP Saved on #VMEXIT (XEN) - VMCB Clean Bits (XEN) - DecodeAssists (XEN) - Pause-Intercept Filter (XEN) HVM: SVM enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB (XEN) do_IRQ: 1.231 No irq handler for vector (irq -1) (XEN) do_IRQ: 2.231 No irq handler for vector (irq -1) (XEN) do_IRQ: 3.231 No irq handler for vector (irq -1) (XEN) do_IRQ: 4.231 No irq handler for vector (irq -1) (XEN) Brought up 6 CPUs (XEN) do_IRQ: 5.231 No irq handler for vector (irq -1) (XEN) ACPI sleep modes: S3 (XEN) MCA: Use hw thresholding to adjust polling frequency (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x234f000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000810000000->0000000814000000 (1021481 pages to be allocated) (XEN) Init. ramdisk: 000000082c629000->000000082efffc00 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff8234f000 (XEN) Init. ramdisk: ffffffff8234f000->ffffffff84d25c00 (XEN) Phys-Mach map: ffffffff84d26000->ffffffff85526000 (XEN) Start info: ffffffff85526000->ffffffff855264b4 (XEN) Page tables: ffffffff85527000->ffffffff85556000 (XEN) Boot stack: ffffffff85556000->ffffffff85557000 (XEN) TOTAL: ffffffff80000000->ffffffff85800000 (XEN) ENTRY ADDRESS: ffffffff81cf3210 (XEN) Dom0 has maximum 6 VCPUs (XEN) Scrubbing Free RAM: ......................................................................................................................................................................................................................................................................................done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen) (XEN) Freed 220kB init memory. (XEN) traps.c:2488:d0 Domain attempted WRMSR 00000000c0010201 from 0x0000000000000000 to 0x000000000000abcd. (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:04.0 (XEN) PCI add device 00:06.0 (XEN) PCI add device 00:07.0 (XEN) PCI add device 00:11.0 (XEN) PCI add device 00:12.0 (XEN) PCI add device 00:12.1 (XEN) PCI add device 00:12.2 (XEN) PCI add device 00:13.0 (XEN) PCI add device 00:13.1 (XEN) PCI add device 00:13.2 (XEN) PCI add device 00:14.0 (XEN) PCI add device 00:14.1 (XEN) PCI add device 00:14.2 (XEN) PCI add device 00:14.3 (XEN) PCI add device 00:14.4 (XEN) PCI add device 00:14.5 (XEN) PCI add device 00:18.0 (XEN) PCI add device 00:18.1 (XEN) PCI add device 00:18.2 (XEN) PCI add device 00:18.3 (XEN) PCI add device 00:18.4 (XEN) PCI add device 00:18.5 (XEN) PCI add device 01:05.0 (XEN) PCI add device 01:05.1 (XEN) PCI add device 02:00.0 (XEN) PCI add device 03:00.0 (XEN) PCI add device 04:00.0 (XEN) physdev.c:171: dom0: wrong map_pirq type 3 (XEN) no cpu_id for acpi_id 6 (XEN) no cpu_id for acpi_id 7 === kernel dmesg === [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5) [ 0.000000] Command line: root=/dev/mapper/cnG0-ubuntu.root ro console=hvc0 earlyprintk=xen nomodeset [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Freeing 9f-100 pfn range: 97 pages freed [ 0.000000] 1-1 mapping on 9f->100 [ 0.000000] Freeing afdf0-100000 pfn range: 328208 pages freed [ 0.000000] 1-1 mapping on afdf0->100000 [ 0.000000] Released 328305 pages of unused memory [ 0.000000] Set 328305 page(s) to 1-1 mapping [ 0.000000] Populating 100000-150271 pfn range: 328305 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000afdeffff] usable [ 0.000000] Xen: [mem 0x00000000afdf0000-0x00000000afdf2fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000afdf3000-0x00000000afdfffff] ACPI data [ 0.000000] Xen: [mem 0x00000000afe00000-0x00000000afefffff] reserved [ 0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x0000000150270fff] usable [ 0.000000] Xen: [mem 0x0000000150271000-0x000000082effffff] unusable [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3/GA-78LMT-USB3, BIOS F2 08/10/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x150271 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0xafdf0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x04d25fff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xafdeffff] [ 0.000000] [mem 0x00000000-0xafdeffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xafdeffff @ [mem 0x00a7d000-0x00ffffff] [ 0.000000] xen: setting RW the range fce000 - 1000000 [ 0.000000] init_memory_mapping: [mem 0x100000000-0x150270fff] [ 0.000000] [mem 0x100000000-0x150270fff] page 4k [ 0.000000] kernel direct mapping tables up to 0x150270fff @ [mem 0xaf367000-0xafdeffff] [ 0.000000] xen: setting RW the range af5eb000 - afdf0000 [ 0.000000] RAMDISK: [mem 0x0234f000-0x04d25fff] [ 0.000000] ACPI: RSDP 00000000000f7860 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000afdf3000 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000afdf3080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000afdf3100 0683B (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000afdf0000 00040 [ 0.000000] ACPI: MSDM 00000000afdf9a00 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: HPET 00000000afdf9a80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000afdf9ac0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 00000000afdf9b00 00022 (v01 GBT GBT B0 5455312E BG?? 00000101) [ 0.000000] ACPI: APIC 00000000afdf9940 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000afdf9ba0 01158 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000150270fff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x150270fff] [ 0.000000] NODE_DATA [mem 0x15026d000-0x150270fff] [ 0.000000] Section 41 and 42 (node 0) have a circular dependency on usemap and pgdat allocations [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x150270fff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xafdeffff] [ 0.000000] node 0: [mem 0x100000000-0x150270fff] [ 0.000000] On node 0 totalpages: 1048560 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1367 pages reserved [ 0.000000] DMA zone: 2552 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 699952 pages, LIFO batch:31 [ 0.000000] Normal zone: 5130 pages used for memmap [ 0.000000] Normal zone: 323175 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000afdf0000 - 00000000afdf3000 [ 0.000000] PM: Registered nosave memory: 00000000afdf3000 - 00000000afe00000 [ 0.000000] PM: Registered nosave memory: 00000000afe00000 - 00000000aff00000 [ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] e820: [mem 0xaff00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.3 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880150000000 s83584 r8192 d22912 u262144 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 8.506849] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025679 [ 8.506851] Policy zone: Normal [ 8.506854] Kernel command line: root=/dev/mapper/cnG0-ubuntu.root ro console=hvc0 earlyprintk=xen nomodeset [ 8.507218] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 8.507224] __ex_table already sorted, skipping sort [ 8.543544] software IO TLB [mem 0x147800000-0x14b7fffff] (64MB) mapped at [ffff880147800000-ffff88014b7fffff] [ 8.561472] Memory: 3984368k/5507524k available (6711k kernel code, 1313284k absent, 209872k reserved, 6459k data, 928k init) [ 8.561551] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 8.561588] Hierarchical RCU implementation. [ 8.561590] RCU dyntick-idle grace-period acceleration is enabled. [ 8.561600] NR_IRQS:16640 nr_irqs:728 16 [ 8.561682] xen: sci override: global_irq=9 trigger=0 polarity=1 [ 8.561684] xen: registering gsi 9 triggering 0 polarity 1 [ 8.561693] xen: --> pirq=9 -> irq=9 (gsi=9) [ 8.561700] xen: acpi sci 9 [ 8.561704] xen: --> pirq=1 -> irq=1 (gsi=1) [ 8.561706] xen: --> pirq=2 -> irq=2 (gsi=2) [ 8.561709] xen: --> pirq=3 -> irq=3 (gsi=3) [ 8.561711] xen: --> pirq=4 -> irq=4 (gsi=4) [ 8.561714] xen: --> pirq=5 -> irq=5 (gsi=5) [ 8.561716] xen: --> pirq=6 -> irq=6 (gsi=6) [ 8.561718] xen: --> pirq=7 -> irq=7 (gsi=7) [ 8.561721] xen: --> pirq=8 -> irq=8 (gsi=8) [ 8.561723] xen: --> pirq=10 -> irq=10 (gsi=10) [ 8.561726] xen: --> pirq=11 -> irq=11 (gsi=11) [ 8.561729] xen: --> pirq=12 -> irq=12 (gsi=12) [ 8.561731] xen: --> pirq=13 -> irq=13 (gsi=13) [ 8.561734] xen: --> pirq=14 -> irq=14 (gsi=14) [ 8.561736] xen: --> pirq=15 -> irq=15 (gsi=15) [ 8.562334] Console: colour VGA+ 80x25 [ 8.562338] console [hvc0] enabled, bootconsole disabled [ 8.565790] allocated 17301504 bytes of page_cgroup [ 8.565796] please try ''cgroup_disable=memory'' option if you don''t want memory cgroups [ 8.565831] Xen: using vcpuop timer interface [ 8.565837] installing Xen timer for CPU 0 [ 8.565863] Detected 3515.588 MHz processor. [ 8.565870] Calibrating delay loop (skipped), value calculated using timer frequency.. 7031.17 BogoMIPS (lpj=14062352) [ 8.565875] pid_max: default: 32768 minimum: 301 [ 8.565907] Security Framework initialized [ 8.565916] AppArmor: AppArmor initialized [ 8.565918] Yama: becoming mindful. [ 8.567004] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 8.568482] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 8.568973] Mount-cache hash table entries: 256 [ 8.569191] Initializing cgroup subsys cpuacct [ 8.569194] Initializing cgroup subsys memory [ 8.569208] Initializing cgroup subsys devices [ 8.569211] Initializing cgroup subsys freezer [ 8.569214] Initializing cgroup subsys blkio [ 8.569216] Initializing cgroup subsys perf_event [ 8.569274] tseg: 00aff00000 [ 8.569277] CPU: Physical Processor ID: 0 [ 8.569279] CPU: Processor Core ID: 0 [ 8.570793] ACPI: Core revision 20120320 [ 8.627497] ftrace: allocating 25118 entries in 99 pages [ 9.353037] cpu 0 spinlock event irq 41 [ 9.353058] Performance Events: Broken PMU hardware detected, using software events only. [ 9.353200] NMI watchdog: disabled (cpu0): hardware events not enabled [ 9.353308] installing Xen timer for CPU 1 [ 9.353318] cpu 1 spinlock event irq 48 [ 9.353532] installing Xen timer for CPU 2 [ 9.353541] cpu 2 spinlock event irq 55 [ 9.353739] installing Xen timer for CPU 3 [ 9.353748] cpu 3 spinlock event irq 62 [ 9.353941] installing Xen timer for CPU 4 [ 9.353953] cpu 4 spinlock event irq 69 [ 9.354111] installing Xen timer for CPU 5 [ 9.354120] cpu 5 spinlock event irq 76 [ 9.354263] Brought up 6 CPUs [ 9.354572] devtmpfs: initialized [ 9.355644] EVM: security.selinux [ 9.355646] EVM: security.SMACK64 [ 9.355648] EVM: security.capability [ 9.355723] PM: Registering ACPI NVS region [mem 0xafdf0000-0xafdf2fff] (12288 bytes) [ 9.356337] Grant tables using version 2 layout. [ 9.356351] Grant table initialized [ 9.356394] dummy: [ 9.356432] RTC time: 12:18:04, date: 11/16/12 [ 9.356463] NET: Registered protocol family 16 [ 9.356614] Trying to unpack rootfs image as initramfs... [ 9.356796] ACPI: bus type pci registered [ 9.356854] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 9.356858] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 9.402307] Freeing initrd memory: 42844k freed [ 9.419567] PCI: Using configuration type 1 for base access [ 9.420720] bio: create slab <bio-0> at 0 [ 9.420859] ACPI: Added _OSI(Module Device) [ 9.420862] ACPI: Added _OSI(Processor Device) [ 9.420865] ACPI: Added _OSI(3.0 _SCP Extensions) [ 9.420868] ACPI: Added _OSI(Processor Aggregator Device) [ 9.422373] ACPI: EC: Look up EC in DSDT [ 9.430987] ACPI: Interpreter enabled [ 9.430994] ACPI: (supports S0 S3 S4 S5) [ 9.431023] ACPI: Using IOAPIC for interrupt routing [ 9.436198] ACPI: No dock devices found. [ 9.436204] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 9.436267] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 9.436361] pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7] [ 9.436365] pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff] [ 9.436369] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff] [ 9.436372] pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff] [ 9.436376] pci_root PNP0A03:00: >host bridge window [mem 0xd0000000-0xfebfffff] [ 9.436409] PCI host bridge to bus 0000:00 [ 9.436412] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7] [ 9.436415] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff] [ 9.436419] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff] [ 9.436422] pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff] [ 9.436426] pci_bus 0000:00: >root bus resource [mem 0xd0000000-0xfebfffff] [ 9.436452] pci 0000:00:00.0: >[1022:9600] type 00 class 0x060000 [ 9.436482] pci 0000:00:00.0: >reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 9.436599] pci 0000:00:01.0: >[1022:9602] type 01 class 0x060400 [ 9.436706] pci 0000:00:04.0: >[1022:9604] type 01 class 0x060400 [ 9.436804] pci 0000:00:04.0: >PME# supported from D0 D3hot D3cold [ 9.436841] pci 0000:00:06.0: >[1022:9606] type 01 class 0x060400 [ 9.436939] pci 0000:00:06.0: >PME# supported from D0 D3hot D3cold [ 9.436974] pci 0000:00:07.0: >[1022:9607] type 01 class 0x060400 [ 9.437071] pci 0000:00:07.0: >PME# supported from D0 D3hot D3cold [ 9.437128] pci 0000:00:11.0: >[1002:4390] type 00 class 0x01018f [ 9.437160] pci 0000:00:11.0: >reg 10: [io 0xff00-0xff07] [ 9.437176] pci 0000:00:11.0: >reg 14: [io 0xfe00-0xfe03] [ 9.437191] pci 0000:00:11.0: >reg 18: [io 0xfd00-0xfd07] [ 9.437206] pci 0000:00:11.0: >reg 1c: [io 0xfc00-0xfc03] [ 9.437221] pci 0000:00:11.0: >reg 20: [io 0xfb00-0xfb0f] [ 9.437236] pci 0000:00:11.0: >reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 9.437269] pci 0000:00:11.0: >set SATA to AHCI mode [ 9.437348] pci 0000:00:12.0: >[1002:4397] type 00 class 0x0c0310 [ 9.437370] pci 0000:00:12.0: >reg 10: [mem 0xfe02e000-0xfe02efff] [ 9.437478] pci 0000:00:12.1: >[1002:4398] type 00 class 0x0c0310 [ 9.437499] pci 0000:00:12.1: >reg 10: [mem 0xfe02d000-0xfe02dfff] [ 9.437628] pci 0000:00:12.2: >[1002:4396] type 00 class 0x0c0320 [ 9.437659] pci 0000:00:12.2: >reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 9.437800] pci 0000:00:12.2: >supports D1 D2 [ 9.437802] pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot [ 9.437839] pci 0000:00:13.0: >[1002:4397] type 00 class 0x0c0310 [ 9.437863] pci 0000:00:13.0: >reg 10: [mem 0xfe02b000-0xfe02bfff] [ 9.437972] pci 0000:00:13.1: >[1002:4398] type 00 class 0x0c0310 [ 9.437993] pci 0000:00:13.1: >reg 10: [mem 0xfe02a000-0xfe02afff] [ 9.438111] pci 0000:00:13.2: >[1002:4396] type 00 class 0x0c0320 [ 9.438142] pci 0000:00:13.2: >reg 10: [mem 0xfe029000-0xfe0290ff] [ 9.438283] pci 0000:00:13.2: >supports D1 D2 [ 9.438284] pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot [ 9.438328] pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500 [ 9.438499] pci 0000:00:14.1: >[1002:439c] type 00 class 0x01018a [ 9.438526] pci 0000:00:14.1: >reg 10: [io 0x0000-0x0007] [ 9.438541] pci 0000:00:14.1: >reg 14: [io 0x0000-0x0003] [ 9.438556] pci 0000:00:14.1: >reg 18: [io 0x0000-0x0007] [ 9.438571] pci 0000:00:14.1: >reg 1c: [io 0x0000-0x0003] [ 9.438586] pci 0000:00:14.1: >reg 20: [io 0xfa00-0xfa0f] [ 9.438684] pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300 [ 9.438718] pci 0000:00:14.2: >reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 9.438837] pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold [ 9.438860] pci 0000:00:14.3: >[1002:439d] type 00 class 0x060100 [ 9.438999] pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401 [ 9.439072] pci 0000:00:14.5: >[1002:4399] type 00 class 0x0c0310 [ 9.439093] pci 0000:00:14.5: >reg 10: [mem 0xfe028000-0xfe028fff] [ 9.439211] pci 0000:00:18.0: >[1022:1600] type 00 class 0x060000 [ 9.439279] pci 0000:00:18.1: >[1022:1601] type 00 class 0x060000 [ 9.439327] pci 0000:00:18.2: >[1022:1602] type 00 class 0x060000 [ 9.439379] pci 0000:00:18.3: >[1022:1603] type 00 class 0x060000 [ 9.439446] pci 0000:00:18.4: >[1022:1604] type 00 class 0x060000 [ 9.439495] pci 0000:00:18.5: >[1022:1605] type 00 class 0x060000 [ 9.439613] pci 0000:01:05.0: >[1002:9616] type 00 class 0x030000 [ 9.439634] pci 0000:01:05.0: >reg 10: [mem 0xd0000000-0xdfffffff pref] [ 9.439645] pci 0000:01:05.0: >reg 14: [io 0xce00-0xceff] [ 9.439655] pci 0000:01:05.0: >reg 18: [mem 0xfdae0000-0xfdaeffff] [ 9.439682] pci 0000:01:05.0: >reg 24: [mem 0xfd900000-0xfd9fffff] [ 9.439732] pci 0000:01:05.0: >supports D1 D2 [ 9.439754] pci 0000:01:05.1: >[1002:960f] type 00 class 0x040300 [ 9.439775] pci 0000:01:05.1: >reg 10: [mem 0xfdafc000-0xfdafffff] [ 9.439868] pci 0000:01:05.1: >supports D1 D2 [ 9.439936] pci 0000:00:01.0: >PCI bridge to [bus 01-01] [ 9.439945] pci 0000:00:01.0: > bridge window [io 0xc000-0xcfff] [ 9.439949] pci 0000:00:01.0: > bridge window [mem 0xfd900000-0xfdafffff] [ 9.439956] pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 9.440038] pci 0000:02:00.0: >[1b6f:7023] type 00 class 0x0c0330 [ 9.440064] pci 0000:02:00.0: >reg 10: [mem 0xfd6f8000-0xfd6fffff 64bit] [ 9.440191] pci 0000:02:00.0: >supports D1 D2 [ 9.440192] pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold [ 9.450926] pci 0000:00:04.0: >PCI bridge to [bus 02-02] [ 9.450934] pci 0000:00:04.0: > bridge window [io 0xb000-0xbfff] [ 9.450939] pci 0000:00:04.0: > bridge window [mem 0xfd600000-0xfd6fffff] [ 9.450946] pci 0000:00:04.0: > bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 9.451034] pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000 [ 9.451054] pci 0000:03:00.0: >reg 10: [io 0xee00-0xeeff] [ 9.451089] pci 0000:03:00.0: >reg 18: [mem 0xfddff000-0xfddfffff 64bit pref] [ 9.451112] pci 0000:03:00.0: >reg 20: [mem 0xfddf8000-0xfddfbfff 64bit pref] [ 9.451211] pci 0000:03:00.0: >supports D1 D2 [ 9.451213] pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold [ 9.463087] pci 0000:00:06.0: >PCI bridge to [bus 03-03] [ 9.463096] pci 0000:00:06.0: > bridge window [io 0xe000-0xefff] [ 9.463100] pci 0000:00:06.0: > bridge window [mem 0xfde00000-0xfdefffff] [ 9.463107] pci 0000:00:06.0: > bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 9.463191] pci 0000:04:00.0: >[1b6f:7023] type 00 class 0x0c0330 [ 9.463217] pci 0000:04:00.0: >reg 10: [mem 0xfdcf8000-0xfdcfffff 64bit] [ 9.463346] pci 0000:04:00.0: >supports D1 D2 [ 9.463348] pci 0000:04:00.0: >PME# supported from D0 D1 D2 D3hot D3cold [ 9.475247] pci 0000:00:07.0: >PCI bridge to [bus 04-04] [ 9.475256] pci 0000:00:07.0: > bridge window [io 0xd000-0xdfff] [ 9.475260] pci 0000:00:07.0: > bridge window [mem 0xfdc00000-0xfdcfffff] [ 9.475267] pci 0000:00:07.0: > bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 9.475360] pci 0000:00:14.4: >PCI bridge to [bus 05-05] (subtractive decode) [ 9.475367] pci 0000:00:14.4: > bridge window [io 0xa000-0xafff] [ 9.475377] pci 0000:00:14.4: > bridge window [mem 0xfd800000-0xfd8fffff] [ 9.475382] pci 0000:00:14.4: > bridge window [mem 0xfd700000-0xfd7fffff pref] [ 9.475384] pci 0000:00:14.4: > bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 9.475386] pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode) [ 9.475388] pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 9.475390] pci 0000:00:14.4: > bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 9.475392] pci 0000:00:14.4: > bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode) [ 9.475425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 9.475668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 9.475708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 9.475742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 9.475772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 9.475811] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 9.475847] pci0000:00: >Requesting ACPI _OSC control (0x1d) [ 9.475851] pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 9.475854] ACPI _OSC control for PCIe not granted, disabling ASPM [ 9.492707] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 9.492759] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 9.492809] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 9.492859] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 9.492908] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 9.492956] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 9.493005] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 9.493084] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 9.493120] xen/balloon: Initialising balloon driver. [ 9.493134] xen-balloon: Initialising balloon driver. [ 9.493164] xen/balloon: Xen selfballooning driver disabled for domain0. [ 9.493248] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 9.493254] vgaarb: loaded [ 9.493256] vgaarb: bridge control possible 0000:01:05.0 [ 9.493416] SCSI subsystem initialized [ 9.493483] libata version 3.00 loaded. [ 9.493503] ACPI: bus type usb registered [ 9.493521] usbcore: registered new interface driver usbfs [ 9.493530] usbcore: registered new interface driver hub [ 9.493568] usbcore: registered new device driver usb [ 9.493655] PCI: Using ACPI for IRQ routing [ 9.508590] PCI: pci_cache_line_size set to 64 bytes [ 9.508598] pci 0000:00:00.0: >no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 9.508729] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 9.508731] e820: reserve RAM buffer [mem 0xafdf0000-0xafffffff] [ 9.508733] e820: reserve RAM buffer [mem 0x150271000-0x153ffffff] [ 9.508814] NetLabel: Initializing [ 9.508816] NetLabel: domain hash size = 128 [ 9.508818] NetLabel: protocols = UNLABELED CIPSOv4 [ 9.508830] NetLabel: unlabeled traffic allowed by default [ 9.508934] Switching to clocksource xen [ 9.516813] AppArmor: AppArmor Filesystem Enabled [ 9.516829] pnp: PnP ACPI init [ 9.516840] ACPI: bus type pnp registered [ 9.516920] pnp 00:00: >[bus 00-ff] [ 9.516922] pnp 00:00: >[io 0x0cf8-0x0cff] [ 9.516924] pnp 00:00: >[io 0x0000-0x0cf7 window] [ 9.516926] pnp 00:00: >[io 0x0d00-0xffff window] [ 9.516928] pnp 00:00: >[mem 0x000a0000-0x000bffff window] [ 9.516930] pnp 00:00: >[mem 0x000c0000-0x000dffff window] [ 9.516932] pnp 00:00: >[mem 0xd0000000-0xfebfffff window] [ 9.516974] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active) [ 9.516985] pnp 00:01: >[io 0x0010-0x001f] [ 9.516986] pnp 00:01: >[io 0x0022-0x003f] [ 9.516988] pnp 00:01: >[io 0x0044-0x005f] [ 9.516990] pnp 00:01: >[io 0x0062-0x0063] [ 9.516991] pnp 00:01: >[io 0x0065-0x006f] [ 9.516993] pnp 00:01: >[io 0x0074-0x007f] [ 9.516994] pnp 00:01: >[io 0x0091-0x0093] [ 9.516996] pnp 00:01: >[io 0x00a2-0x00bf] [ 9.516998] pnp 00:01: >[io 0x00e0-0x00ef] [ 9.516999] pnp 00:01: >[io 0x04d0-0x04d1] [ 9.517001] pnp 00:01: >[io 0x0220-0x0225] [ 9.517002] pnp 00:01: >[io 0x0290-0x0294] [ 9.517060] system 00:01: >[io 0x04d0-0x04d1] has been reserved [ 9.517064] system 00:01: >[io 0x0220-0x0225] has been reserved [ 9.517067] system 00:01: >[io 0x0290-0x0294] has been reserved [ 9.517071] system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.517640] pnp 00:02: >[io 0x4100-0x411f] [ 9.517644] pnp 00:02: >[io 0x0228-0x022f] [ 9.517646] pnp 00:02: >[io 0x040b] [ 9.517647] pnp 00:02: >[io 0x04d6] [ 9.517649] pnp 00:02: >[io 0x0c00-0x0c01] [ 9.517651] pnp 00:02: >[io 0x0c14] [ 9.517652] pnp 00:02: >[io 0x0c50-0x0c52] [ 9.517654] pnp 00:02: >[io 0x0c6c-0x0c6d] [ 9.517655] pnp 00:02: >[io 0x0c6f] [ 9.517657] pnp 00:02: >[io 0x0cd0-0x0cd1] [ 9.517658] pnp 00:02: >[io 0x0cd2-0x0cd3] [ 9.517660] pnp 00:02: >[io 0x0cd4-0x0cdf] [ 9.517661] pnp 00:02: >[io 0x4000-0x40fe] [ 9.517663] pnp 00:02: >[io 0x4210-0x4217] [ 9.517664] pnp 00:02: >[io 0x0b00-0x0b0f] [ 9.517666] pnp 00:02: >[io 0x0b10-0x0b1f] [ 9.517667] pnp 00:02: >[io 0x0b20-0x0b3f] [ 9.517669] pnp 00:02: >[mem 0x00000000-0x00000fff window] [ 9.517671] pnp 00:02: >[mem 0xfee00400-0xfee00fff window] [ 9.517677] pnp 00:02: >disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 9.517759] system 00:02: >[io 0x4100-0x411f] has been reserved [ 9.517764] system 00:02: >[io 0x0228-0x022f] has been reserved [ 9.517767] system 00:02: >[io 0x040b] has been reserved [ 9.517771] system 00:02: >[io 0x04d6] has been reserved [ 9.517774] system 00:02: >[io 0x0c00-0x0c01] has been reserved [ 9.517777] system 00:02: >[io 0x0c14] has been reserved [ 9.517780] system 00:02: >[io 0x0c50-0x0c52] has been reserved [ 9.517784] system 00:02: >[io 0x0c6c-0x0c6d] has been reserved [ 9.517787] system 00:02: >[io 0x0c6f] has been reserved [ 9.517790] system 00:02: >[io 0x0cd0-0x0cd1] has been reserved [ 9.517793] system 00:02: >[io 0x0cd2-0x0cd3] has been reserved [ 9.517797] system 00:02: >[io 0x0cd4-0x0cdf] has been reserved [ 9.517800] system 00:02: >[io 0x4000-0x40fe] has been reserved [ 9.517803] system 00:02: >[io 0x4210-0x4217] has been reserved [ 9.517807] system 00:02: >[io 0x0b00-0x0b0f] has been reserved [ 9.517810] system 00:02: >[io 0x0b10-0x0b1f] has been reserved [ 9.517814] system 00:02: >[io 0x0b20-0x0b3f] has been reserved [ 9.517817] system 00:02: >[mem 0xfee00400-0xfee00fff window] has been reserved [ 9.517823] system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.517937] pnp 00:03: >[dma 4] [ 9.517939] pnp 00:03: >[io 0x0000-0x000f] [ 9.517941] pnp 00:03: >[io 0x0080-0x0090] [ 9.517943] pnp 00:03: >[io 0x0094-0x009f] [ 9.517945] pnp 00:03: >[io 0x00c0-0x00df] [ 9.517975] pnp 00:03: >Plug and Play ACPI device, IDs PNP0200 (active) [ 9.518029] pnp 00:04: >[irq 0 disabled] [ 9.518032] xen: registering gsi 8 triggering 1 polarity 0 [ 9.518041] pnp 00:04: >[irq 8] [ 9.518042] pnp 00:04: >[mem 0xfed00000-0xfed003ff] [ 9.518071] pnp 00:04: >Plug and Play ACPI device, IDs PNP0103 (active) [ 9.518099] pnp 00:05: >[io 0x0070-0x0073] [ 9.518129] pnp 00:05: >Plug and Play ACPI device, IDs PNP0b00 (active) [ 9.518137] pnp 00:06: >[io 0x0061] [ 9.518165] pnp 00:06: >Plug and Play ACPI device, IDs PNP0800 (active) [ 9.518173] pnp 00:07: >[io 0x00f0-0x00ff] [ 9.518174] xen: registering gsi 13 triggering 1 polarity 0 [ 9.518181] pnp 00:07: >[irq 13] [ 9.518211] pnp 00:07: >Plug and Play ACPI device, IDs PNP0c04 (active) [ 9.518387] pnp 00:08: >[io 0x03f0-0x03f5] [ 9.518389] pnp 00:08: >[io 0x03f7] [ 9.518391] xen: registering gsi 6 triggering 1 polarity 0 [ 9.518397] pnp 00:08: >[irq 6] [ 9.518399] pnp 00:08: >[dma 2] [ 9.518444] pnp 00:08: >Plug and Play ACPI device, IDs PNP0700 (active) [ 9.518649] pnp 00:09: >[io 0x03f8-0x03ff] [ 9.518650] xen: registering gsi 4 triggering 1 polarity 0 [ 9.518652] Already setup the GSI :4 [ 9.518655] pnp 00:09: >[irq 4] [ 9.518710] pnp 00:09: >Plug and Play ACPI device, IDs PNP0501 (active) [ 9.518930] pnp 00:0a: >[io 0x0378-0x037f] [ 9.518932] xen: registering gsi 7 triggering 1 polarity 0 [ 9.518938] pnp 00:0a: >[irq 7] [ 9.518986] pnp 00:0a: >Plug and Play ACPI device, IDs PNP0400 (active) [ 9.519117] pnp 00:0b: >[mem 0xe0000000-0xefffffff] [ 9.519174] system 00:0b: >[mem 0xe0000000-0xefffffff] has been reserved [ 9.519179] system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.519352] pnp 00:0c: >[mem 0x000cec00-0x000cffff] [ 9.519354] pnp 00:0c: >[mem 0x000f0000-0x000f7fff] [ 9.519359] pnp 00:0c: >[mem 0x000f8000-0x000fbfff] [ 9.519361] pnp 00:0c: >[mem 0x000fc000-0x000fffff] [ 9.519362] pnp 00:0c: >[mem 0xafdf0000-0xafdfffff] [ 9.519364] pnp 00:0c: >[mem 0xffff0000-0xffffffff] [ 9.519366] pnp 00:0c: >[mem 0x00000000-0x0009ffff] [ 9.519367] pnp 00:0c: >[mem 0x00100000-0xafdeffff] [ 9.519369] pnp 00:0c: >[mem 0xafe00000-0xafefffff] [ 9.519370] pnp 00:0c: >[mem 0xaff00000-0xafffffff] [ 9.519372] pnp 00:0c: >[mem 0xb0000000-0xcfffffff] [ 9.519373] pnp 00:0c: >[mem 0xfec00000-0xfec00fff] [ 9.519375] pnp 00:0c: >[mem 0xfee00000-0xfee00fff] [ 9.519376] pnp 00:0c: >[mem 0xfff80000-0xfffeffff] [ 9.519380] pnp 00:0c: >disabling [mem 0x000cec00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 9.519392] pnp 00:0c: >disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 9.519397] pnp 00:0c: >disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 9.519401] pnp 00:0c: >disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 9.519406] pnp 00:0c: >disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 9.519411] pnp 00:0c: >disabling [mem 0x00100000-0xafdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 9.519480] system 00:0c: >[mem 0xafdf0000-0xafdfffff] could not be reserved [ 9.519484] system 00:0c: >[mem 0xffff0000-0xffffffff] has been reserved [ 9.519488] system 00:0c: >[mem 0xafe00000-0xafefffff] has been reserved [ 9.519491] system 00:0c: >[mem 0xaff00000-0xafffffff] could not be reserved [ 9.519495] system 00:0c: >[mem 0xb0000000-0xcfffffff] has been reserved [ 9.519498] system 00:0c: >[mem 0xfec00000-0xfec00fff] could not be reserved [ 9.519502] system 00:0c: >[mem 0xfee00000-0xfee00fff] could not be reserved [ 9.519505] system 00:0c: >[mem 0xfff80000-0xfffeffff] has been reserved [ 9.519510] system 00:0c: >Plug and Play ACPI device, IDs PNP0c01 (active) [ 9.519528] pnp: PnP ACPI: found 13 devices [ 9.519531] ACPI: ACPI bus type pnp unregistered [ 9.525700] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 9.525771] pci 0000:00:01.0: >PCI bridge to [bus 01-01] [ 9.525776] pci 0000:00:01.0: > bridge window [io 0xc000-0xcfff] [ 9.525783] pci 0000:00:01.0: > bridge window [mem 0xfd900000-0xfdafffff] [ 9.525789] pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 9.525797] pci 0000:00:04.0: >PCI bridge to [bus 02-02] [ 9.525802] pci 0000:00:04.0: > bridge window [io 0xb000-0xbfff] [ 9.525809] pci 0000:00:04.0: > bridge window [mem 0xfd600000-0xfd6fffff] [ 9.525815] pci 0000:00:04.0: > bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 9.525823] pci 0000:00:06.0: >PCI bridge to [bus 03-03] [ 9.525827] pci 0000:00:06.0: > bridge window [io 0xe000-0xefff] [ 9.525834] pci 0000:00:06.0: > bridge window [mem 0xfde00000-0xfdefffff] [ 9.525840] pci 0000:00:06.0: > bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 9.525848] pci 0000:00:07.0: >PCI bridge to [bus 04-04] [ 9.525852] pci 0000:00:07.0: > bridge window [io 0xd000-0xdfff] [ 9.525859] pci 0000:00:07.0: > bridge window [mem 0xfdc00000-0xfdcfffff] [ 9.525865] pci 0000:00:07.0: > bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 9.525873] pci 0000:00:14.4: >PCI bridge to [bus 05-05] [ 9.525878] pci 0000:00:14.4: > bridge window [io 0xa000-0xafff] [ 9.525886] pci 0000:00:14.4: > bridge window [mem 0xfd800000-0xfd8fffff] [ 9.525893] pci 0000:00:14.4: > bridge window [mem 0xfd700000-0xfd7fffff pref] [ 9.525914] xen: registering gsi 16 triggering 0 polarity 1 [ 9.525923] xen: --> pirq=16 -> irq=16 (gsi=16) [ 9.525934] xen: registering gsi 18 triggering 0 polarity 1 [ 9.525939] xen: --> pirq=18 -> irq=18 (gsi=18) [ 9.525950] xen: registering gsi 19 triggering 0 polarity 1 [ 9.525954] xen: --> pirq=19 -> irq=19 (gsi=19) [ 9.525969] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7] [ 9.525972] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff] [ 9.525973] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff] [ 9.525975] pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff] [ 9.525977] pci_bus 0000:00: >resource 8 [mem 0xd0000000-0xfebfffff] [ 9.525979] pci_bus 0000:01: >resource 0 [io 0xc000-0xcfff] [ 9.525980] pci_bus 0000:01: >resource 1 [mem 0xfd900000-0xfdafffff] [ 9.525982] pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 9.525984] pci_bus 0000:02: >resource 0 [io 0xb000-0xbfff] [ 9.525986] pci_bus 0000:02: >resource 1 [mem 0xfd600000-0xfd6fffff] [ 9.525987] pci_bus 0000:02: >resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 9.525989] pci_bus 0000:03: >resource 0 [io 0xe000-0xefff] [ 9.525991] pci_bus 0000:03: >resource 1 [mem 0xfde00000-0xfdefffff] [ 9.525993] pci_bus 0000:03: >resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 9.525994] pci_bus 0000:04: >resource 0 [io 0xd000-0xdfff] [ 9.525996] pci_bus 0000:04: >resource 1 [mem 0xfdc00000-0xfdcfffff] [ 9.525998] pci_bus 0000:04: >resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 9.526000] pci_bus 0000:05: >resource 0 [io 0xa000-0xafff] [ 9.526001] pci_bus 0000:05: >resource 1 [mem 0xfd800000-0xfd8fffff] [ 9.526003] pci_bus 0000:05: >resource 2 [mem 0xfd700000-0xfd7fffff pref] [ 9.526005] pci_bus 0000:05: >resource 4 [io 0x0000-0x0cf7] [ 9.526006] pci_bus 0000:05: >resource 5 [io 0x0d00-0xffff] [ 9.526008] pci_bus 0000:05: >resource 6 [mem 0x000a0000-0x000bffff] [ 9.526010] pci_bus 0000:05: >resource 7 [mem 0x000c0000-0x000dffff] [ 9.526011] pci_bus 0000:05: >resource 8 [mem 0xd0000000-0xfebfffff] [ 9.526039] NET: Registered protocol family 2 [ 9.526336] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 9.528616] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 9.530582] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 9.530801] TCP: Hash tables configured (established 524288 bind 65536) [ 9.530804] TCP: reno registered [ 9.530825] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 9.530858] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 9.530928] NET: Registered protocol family 1 [ 9.530938] pci 0000:00:01.0: >MSI quirk detected; subordinate MSI disabled [ 9.530966] xen: registering gsi 16 triggering 0 polarity 1 [ 9.530970] Already setup the GSI :16 [ 9.605048] xen: registering gsi 16 triggering 0 polarity 1 [ 9.605051] Already setup the GSI :16 [ 9.677052] xen: registering gsi 17 triggering 0 polarity 1 [ 9.677064] xen: --> pirq=17 -> irq=17 (gsi=17) [ 9.677121] xen: registering gsi 18 triggering 0 polarity 1 [ 9.677123] Already setup the GSI :18 [ 9.749046] xen: registering gsi 18 triggering 0 polarity 1 [ 9.749049] Already setup the GSI :18 [ 9.821052] xen: registering gsi 19 triggering 0 polarity 1 [ 9.821054] Already setup the GSI :19 [ 9.821121] xen: registering gsi 18 triggering 0 polarity 1 [ 9.821123] Already setup the GSI :18 [ 9.893070] pci 0000:01:05.0: >Boot video device [ 9.893083] xen: registering gsi 16 triggering 0 polarity 1 [ 9.893085] Already setup the GSI :16 [ 9.893150] xen: registering gsi 19 triggering 0 polarity 1 [ 9.893152] Already setup the GSI :19 [ 9.893199] PCI: CLS 64 bytes, default 64 [ 9.893736] audit: initializing netlink socket (disabled) [ 9.893753] type=2000 audit(1353068284.117:1): initialized [ 9.910549] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 9.911849] VFS: Disk quotas dquot_6.5.2 [ 9.911886] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 9.912343] fuse init (API version 7.19) [ 9.912421] msgmni has been set to 7865 [ 9.912917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 9.912959] io scheduler noop registered [ 9.912962] io scheduler deadline registered (default) [ 9.912986] io scheduler cfq registered [ 9.913508] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 9.913528] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 9.913644] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 9.913681] ACPI: Power Button [PWRB] [ 9.913721] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 9.913725] ACPI: Power Button [PWRF] [ 9.920036] GHES: HEST is not enabled! [ 9.920974] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 9.922553] hpet_acpi_add: no address or irqs in _CRS [ 9.922565] Linux agpgart interface v0.103 [ 9.924368] brd: module loaded [ 9.925074] loop: module loaded [ 9.925159] ahci 0000:00:11.0: >version 3.0 [ 9.925169] xen: registering gsi 22 triggering 0 polarity 1 [ 9.925178] xen: --> pirq=22 -> irq=22 (gsi=22) [ 9.925297] ahci 0000:00:11.0: >AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 9.925302] ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 9.925928] scsi0 : ahci [ 9.926006] scsi1 : ahci [ 9.926076] scsi2 : ahci [ 9.926177] scsi3 : ahci [ 9.926290] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 9.926294] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 9.926299] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 9.926303] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 9.926393] xen: registering gsi 16 triggering 0 polarity 1 [ 9.926395] Already setup the GSI :16 [ 9.926650] Fixed MDIO Bus: probed [ 9.926689] tun: Universal TUN/TAP device driver, 1.6 [ 9.926691] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 9.926737] PPP generic driver version 2.4.2 [ 9.926778] Initialising Xen virtual ethernet driver. [ 9.926789] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller (EHCI) Driver [ 9.926809] xen: registering gsi 17 triggering 0 polarity 1 [ 9.926811] Already setup the GSI :17 [ 9.926830] ehci_hcd 0000:00:12.2: >EHCI Host Controller [ 9.926836] ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1 [ 9.926847] ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 9.926896] ehci_hcd 0000:00:12.2: >debug port 1 [ 9.926927] ehci_hcd 0000:00:12.2: >irq 17, io mem 0xfe02c000 [ 9.937095] ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00 [ 9.937179] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 [ 9.937189] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.937199] usb usb1: >Product: EHCI Host Controller [ 9.937206] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 9.937214] usb usb1: >SerialNumber: 0000:00:12.2 [ 9.937424] hub 1-0:1.0: >USB hub found [ 9.937429] hub 1-0:1.0: >6 ports detected [ 9.937500] xen: registering gsi 19 triggering 0 polarity 1 [ 9.937502] Already setup the GSI :19 [ 9.937521] ehci_hcd 0000:00:13.2: >EHCI Host Controller [ 9.937527] ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2 [ 9.937535] ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 9.937618] ehci_hcd 0000:00:13.2: >debug port 1 [ 9.937651] ehci_hcd 0000:00:13.2: >irq 19, io mem 0xfe029000 [ 9.949104] ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00 [ 9.949177] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002 [ 9.949188] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.949197] usb usb2: >Product: EHCI Host Controller [ 9.949204] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 9.949212] usb usb2: >SerialNumber: 0000:00:13.2 [ 9.949521] hub 2-0:1.0: >USB hub found [ 9.949533] hub 2-0:1.0: >6 ports detected [ 9.949741] ohci_hcd: USB 1.1 ''Open'' Host Controller (OHCI) Driver [ 9.949792] xen: registering gsi 16 triggering 0 polarity 1 [ 9.949798] Already setup the GSI :16 [ 9.949844] ohci_hcd 0000:00:12.0: >OHCI Host Controller [ 9.949859] ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3 [ 9.949949] ohci_hcd 0000:00:12.0: >irq 16, io mem 0xfe02e000 [ 10.009129] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001 [ 10.009143] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.009153] usb usb3: >Product: OHCI Host Controller [ 10.009160] usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd [ 10.009168] usb usb3: >SerialNumber: 0000:00:12.0 [ 10.009458] hub 3-0:1.0: >USB hub found [ 10.009473] hub 3-0:1.0: >3 ports detected [ 10.009628] xen: registering gsi 16 triggering 0 polarity 1 [ 10.009634] Already setup the GSI :16 [ 10.009684] ohci_hcd 0000:00:12.1: >OHCI Host Controller [ 10.009699] ohci_hcd 0000:00:12.1: >new USB bus registered, assigned bus number 4 [ 10.009752] ohci_hcd 0000:00:12.1: >irq 16, io mem 0xfe02d000 [ 10.069079] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001 [ 10.069092] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.069103] usb usb4: >Product: OHCI Host Controller [ 10.069110] usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd [ 10.069118] usb usb4: >SerialNumber: 0000:00:12.1 [ 10.069432] hub 4-0:1.0: >USB hub found [ 10.069446] hub 4-0:1.0: >3 ports detected [ 10.069605] xen: registering gsi 18 triggering 0 polarity 1 [ 10.069612] Already setup the GSI :18 [ 10.069659] ohci_hcd 0000:00:13.0: >OHCI Host Controller [ 10.069673] ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 5 [ 10.069757] ohci_hcd 0000:00:13.0: >irq 18, io mem 0xfe02b000 [ 10.129125] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001 [ 10.129138] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.129148] usb usb5: >Product: OHCI Host Controller [ 10.129155] usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd [ 10.129163] usb usb5: >SerialNumber: 0000:00:13.0 [ 10.129474] hub 5-0:1.0: >USB hub found [ 10.129492] hub 5-0:1.0: >3 ports detected [ 10.129662] xen: registering gsi 18 triggering 0 polarity 1 [ 10.129669] Already setup the GSI :18 [ 10.129717] ohci_hcd 0000:00:13.1: >OHCI Host Controller [ 10.129731] ohci_hcd 0000:00:13.1: >new USB bus registered, assigned bus number 6 [ 10.129818] ohci_hcd 0000:00:13.1: >irq 18, io mem 0xfe02a000 [ 10.189141] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001 [ 10.189154] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.189164] usb usb6: >Product: OHCI Host Controller [ 10.189171] usb usb6: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd [ 10.189179] usb usb6: >SerialNumber: 0000:00:13.1 [ 10.189485] hub 6-0:1.0: >USB hub found [ 10.189500] hub 6-0:1.0: >3 ports detected [ 10.189690] xen: registering gsi 18 triggering 0 polarity 1 [ 10.189697] Already setup the GSI :18 [ 10.189744] ohci_hcd 0000:00:14.5: >OHCI Host Controller [ 10.189759] ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 7 [ 10.189852] ohci_hcd 0000:00:14.5: >irq 18, io mem 0xfe028000 [ 10.245128] ata4: SATA link down (SStatus 0 SControl 300) [ 10.249106] usb 1-2: >new high-speed USB device number 2 using ehci_hcd [ 10.249155] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001 [ 10.249169] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.249179] usb usb7: >Product: OHCI Host Controller [ 10.249186] usb usb7: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd [ 10.249194] usb usb7: >SerialNumber: 0000:00:14.5 [ 10.249529] hub 7-0:1.0: >USB hub found [ 10.249544] hub 7-0:1.0: >2 ports detected [ 10.249695] uhci_hcd: USB Universal Host Controller Interface driver [ 10.249782] xen: registering gsi 16 triggering 0 polarity 1 [ 10.249788] Already setup the GSI :16 [ 10.249849] xhci_hcd 0000:02:00.0: >xHCI Host Controller [ 10.249863] xhci_hcd 0000:02:00.0: >new USB bus registered, assigned bus number 8 [ 10.250088] xhci_hcd 0000:02:00.0: >irq 16, io mem 0xfd6f8000 [ 10.250341] usb usb8: >New USB device found, idVendor=1d6b, idProduct=0002 [ 10.250351] usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.250360] usb usb8: >Product: xHCI Host Controller [ 10.250367] usb usb8: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd [ 10.250375] usb usb8: >SerialNumber: 0000:02:00.0 [ 10.250591] xHCI xhci_add_endpoint called for root hub [ 10.250595] xHCI xhci_check_bandwidth called for root hub [ 10.250678] hub 8-0:1.0: >USB hub found [ 10.250692] hub 8-0:1.0: >2 ports detected [ 10.250819] xhci_hcd 0000:02:00.0: >xHCI Host Controller [ 10.250830] xhci_hcd 0000:02:00.0: >new USB bus registered, assigned bus number 9 [ 10.250877] usb usb9: >New USB device found, idVendor=1d6b, idProduct=0003 [ 10.250886] usb usb9: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.250895] usb usb9: >Product: xHCI Host Controller [ 10.250903] usb usb9: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd [ 10.250911] usb usb9: >SerialNumber: 0000:02:00.0 [ 10.251089] xHCI xhci_add_endpoint called for root hub [ 10.251093] xHCI xhci_check_bandwidth called for root hub [ 10.251143] hub 9-0:1.0: >USB hub found [ 10.251155] hub 9-0:1.0: >2 ports detected [ 10.251360] xen: registering gsi 19 triggering 0 polarity 1 [ 10.251369] Already setup the GSI :19 [ 10.251438] xhci_hcd 0000:04:00.0: >xHCI Host Controller [ 10.251461] xhci_hcd 0000:04:00.0: >new USB bus registered, assigned bus number 10 [ 10.251653] xhci_hcd 0000:04:00.0: >irq 19, io mem 0xfdcf8000 [ 10.251916] usb usb10: >New USB device found, idVendor=1d6b, idProduct=0002 [ 10.251926] usb usb10: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.251936] usb usb10: >Product: xHCI Host Controller [ 10.251944] usb usb10: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd [ 10.251952] usb usb10: >SerialNumber: 0000:04:00.0 [ 10.252152] xHCI xhci_add_endpoint called for root hub [ 10.252156] xHCI xhci_check_bandwidth called for root hub [ 10.252207] hub 10-0:1.0: >USB hub found [ 10.252221] hub 10-0:1.0: >2 ports detected [ 10.252356] xhci_hcd 0000:04:00.0: >xHCI Host Controller [ 10.252368] xhci_hcd 0000:04:00.0: >new USB bus registered, assigned bus number 11 [ 10.252415] usb usb11: >New USB device found, idVendor=1d6b, idProduct=0003 [ 10.252424] usb usb11: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.252433] usb usb11: >Product: xHCI Host Controller [ 10.252441] usb usb11: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd [ 10.252449] usb usb11: >SerialNumber: 0000:04:00.0 [ 10.252618] xHCI xhci_add_endpoint called for root hub [ 10.252622] xHCI xhci_check_bandwidth called for root hub [ 10.252675] hub 11-0:1.0: >USB hub found [ 10.252688] hub 11-0:1.0: >2 ports detected [ 10.253164] usbcore: registered new interface driver libusual [ 10.253255] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 10.287177] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 10.287181] i8042: If AUX port is really absent please use the ''i8042.noaux'' option [ 10.384667] usb 1-2: >New USB device found, idVendor=1bcf, idProduct=0c31 [ 10.384680] usb 1-2: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 10.384689] usb 1-2: >Product: USB to Serial-ATA bridge [ 10.384697] usb 1-2: >Manufacturer: Sunplus Innovation Technology. [ 10.384705] usb 1-2: >SerialNumber: FFFFFFFE0D007120004347 [ 10.391588] Initializing USB Mass Storage driver... [ 10.392054] scsi4 : usb-storage 1-2:1.0 [ 10.392191] usbcore: registered new interface driver usb-storage [ 10.392199] USB Mass Storage support registered. [ 10.417122] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.417164] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.417204] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.417372] ata1.00: ATA-9: SanDisk SDSSDRC032G, 2.0.0, max UDMA/133 [ 10.417381] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 10.417627] ata1.00: configured for UDMA/133 [ 10.418038] scsi 0:0:0:0: >Direct-Access ATA SanDisk SDSSDRC0 2.0. PQ: 0 ANSI: 5 [ 10.418296] sd 0:0:0:0: >[sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 10.418390] sd 0:0:0:0: >Attached scsi generic sg0 type 0 [ 10.418473] sd 0:0:0:0: >[sda] Write Protect is off [ 10.418483] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00 [ 10.418525] ata3.00: ATA-8: WDC WD10EZRX-00A8LB0, 01.01A01, max UDMA/133 [ 10.418535] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 10.418559] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 10.418671] ata2.00: ATA-8: WDC WD10EZRX-00A8LB0, 01.01A01, max UDMA/133 [ 10.418682] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 10.419351] sda: sda1 sda2 [ 10.419581] ata3.00: configured for UDMA/133 [ 10.419638] ata2.00: configured for UDMA/133 [ 10.420049] sd 0:0:0:0: >[sda] Attached SCSI disk [ 10.420317] scsi 1:0:0:0: >Direct-Access ATA WDC WD10EZRX-00A 01.0 PQ: 0 ANSI: 5 [ 10.420551] sd 1:0:0:0: >[sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 10.420561] sd 1:0:0:0: >[sdb] 4096-byte physical blocks [ 10.420613] sd 1:0:0:0: >Attached scsi generic sg1 type 0 [ 10.420686] sd 1:0:0:0: >[sdb] Write Protect is off [ 10.420695] sd 1:0:0:0: >[sdb] Mode Sense: 00 3a 00 00 [ 10.420746] sd 1:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 10.537235] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.537631] mousedev: PS/2 mouse device common for all mice [ 10.538007] rtc_cmos 00:05: >RTC can wake from S4 [ 10.538301] rtc_cmos 00:05: >rtc core: registered rtc_cmos as rtc0 [ 10.538359] rtc0: alarms up to one month, 242 bytes nvram [ 10.538519] device-mapper: uevent: version 1.0.3 [ 10.538699] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 10.538718] EFI Variables Facility v0.08 2004-May-17 [ 10.539321] ashmem: initialized [ 10.539569] TCP: cubic registered [ 10.539804] NET: Registered protocol family 10 [ 10.540207] NET: Registered protocol family 17 [ 10.540228] Key type dns_resolver registered [ 10.540570] PM: Hibernation image not present or could not be loaded. [ 10.540595] registered taskstats version 1 [ 10.548320] Key type trusted registered [ 10.555790] Key type encrypted registered [ 10.561881] Magic number: 4:775:329 [ 10.561902] tty tty50: >hash matches [ 10.761110] usb 6-1: >new full-speed USB device number 2 using ohci_hcd [ 10.926622] sdb: sdb1 [ 10.927531] sd 1:0:0:0: >[sdb] Attached SCSI disk [ 10.927667] rtc_cmos 00:05: >setting system clock to 2012-11-16 12:18:05 UTC (1353068285) [ 10.927774] scsi 2:0:0:0: >Direct-Access ATA WDC WD10EZRX-00A 01.0 PQ: 0 ANSI: 5 [ 10.927900] powernow-k8: Found 1 AMD FX(tm)-6300 Six-Core Processor (6 cpu cores) (version 2.20.00) [ 10.927954] powernow-k8: Core Performance Boosting: on. [ 10.927988] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 10.927996] EDD information not available. [ 10.928139] sd 2:0:0:0: >[sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 10.928149] sd 2:0:0:0: >[sdc] 4096-byte physical blocks [ 10.928168] usb 6-1: >New USB device found, idVendor=413c, idProduct=1002 [ 10.928171] sd 2:0:0:0: >Attached scsi generic sg2 type 0 [ 10.928193] usb 6-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.928208] usb 6-1: >Product: Dell USB Keyboard Hub [ 10.928221] usb 6-1: >Manufacturer: Dell [ 10.928403] sd 2:0:0:0: >[sdc] Write Protect is off [ 10.928417] sd 2:0:0:0: >[sdc] Mode Sense: 00 3a 00 00 [ 10.928525] sd 2:0:0:0: >[sdc] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 10.934198] hub 6-1:1.0: >USB hub found [ 10.936174] hub 6-1:1.0: >3 ports detected [ 11.226217] usb 6-1.1: >new full-speed USB device number 3 using ohci_hcd [ 11.336166] usb 6-1.1: >New USB device found, idVendor=413c, idProduct=2002 [ 11.336179] usb 6-1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.336189] usb 6-1.1: >Product: Dell USB Keyboard Hub [ 11.336197] usb 6-1.1: >Manufacturer: Dell [ 11.393327] scsi 4:0:0:0: >CD-ROM Slimtype DVD A DS8A4L 9C41 PQ: 0 ANSI: 0 [ 11.407167] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 11.407179] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 11.407480] sr 4:0:0:0: >Attached scsi CD-ROM sr0 [ 11.407693] sr 4:0:0:0: >Attached scsi generic sg3 type 5 [ 11.418252] usb 6-1.3: >new low-speed USB device number 4 using ohci_hcd [ 11.452983] sdc: sdc1 [ 11.453850] sd 2:0:0:0: >[sdc] Attached SCSI disk [ 11.455184] Freeing unused kernel memory: 928k freed [ 11.455528] Write protecting the kernel read-only data: 12288k [ 11.473427] Freeing unused kernel memory: 1472k freed [ 11.475540] Freeing unused kernel memory: 1124k freed [ 11.526184] usb 6-1.3: >New USB device found, idVendor=192f, idProduct=0216 [ 11.526202] usb 6-1.3: >New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 11.526220] usb 6-1.3: >Product: USB Optical Mouse [ 11.570752] udevd[124]: starting version 175 [ 11.597301] md: linear personality registered for level -1 [ 11.605059] md: multipath personality registered for level -4 [ 11.609716] md: raid0 personality registered for level 0 [ 11.622689] md: raid1 personality registered for level 1 [ 11.628765] async_tx: api initialized (async) [ 11.638367] Floppy drive(s): fd0 is unknown type 13 (usb?) [ 11.652741] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 11.652767] xen: registering gsi 18 triggering 0 polarity 1 [ 11.652773] Already setup the GSI :18 [ 11.653354] r8169 0000:03:00.0: >eth0: RTL8168evl/8111evl at 0xffffc9001109a000, 90:2b:34:a0:54:e6, XID 0c900800 IRQ 89 [ 11.653362] r8169 0000:03:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 11.656841] FDC 0 is a post-1991 82077 [ 11.668900] scsi5 : pata_atiixp [ 11.669052] scsi6 : pata_atiixp [ 11.670140] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 11.670157] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 11.689206] usbcore: registered new interface driver usbhid [ 11.689212] usbhid: USB HID core driver [ 11.696273] md: bind<sdb1> [ 11.697022] raid6: sse2x1 4712 MB/s [ 11.755337] md: bind<sdc1> [ 11.757488] bio: create slab <bio-1> at 1 [ 11.757581] md/raid1:md0: not clean -- starting background reconstruction [ 11.757585] md/raid1:md0: active with 2 out of 2 mirrors [ 11.757606] md0: detected capacity change from 0 to 1000068677632 [ 11.757688] md: resync of RAID array md0 [ 11.757694] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 11.757698] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 11.757705] md: using 128k window, over a total of 976629568k. [ 11.765012] raid6: sse2x2 9875 MB/s [ 11.800917] md0: unknown partition table [ 11.833029] raid6: sse2x4 11487 MB/s [ 11.833033] raid6: using algorithm sse2x4 (11487 MB/s) [ 11.833036] raid6: using ssse3x2 recovery algorithm [ 11.850721] xor: automatically using best checksumming function: [ 11.854259] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1.1/6-1.1:1.0/input/input2 [ 11.854386] hid-generic 0003:413C:2002.0001: >input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:13.1-1.1/input0 [ 11.858193] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1.1/6-1.1:1.1/input/input3 [ 11.858316] hid-generic 0003:413C:2002.0002: >input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:13.1-1.1/input1 [ 11.858508] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1.3/6-1.3:1.0/input/input4 [ 11.858761] hid-generic 0003:192F:0216.0003: >input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.1-1.3/input0 [ 11.889026] generic_sse: 2853.000 MB/sec [ 11.890412] md: raid6 personality registered for level 6 [ 11.890418] md: raid5 personality registered for level 5 [ 11.890422] md: raid4 personality registered for level 4 [ 11.901128] md: raid10 personality registered for level 10 [ 12.980208] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 12.983210] XFS (dm-4): Mounting Filesystem [ 13.091194] XFS (dm-4): Starting recovery (logdev: internal) [ 13.467563] XFS (dm-4): Ending recovery (logdev: internal) [ 16.905224] Adding 4194300k swap on /dev/mapper/cnG0-dom0.swap. Priority:-1 extents:1 across:4194300k [ 16.913437] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.920829] udevd[447]: starting version 175 [ 16.936776] lp: driver loaded but no devices found [ 16.946730] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.956099] wmi: Mapper loaded [ 16.965500] [drm] Initialized drm 1.1.0 20060810 [ 16.966299] parport_pc 00:0a: >reported by Plug and Play ACPI [ 16.966389] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 16.982451] [drm] VGACON disable radeon kernel modesetting. [ 16.983704] xen: registering gsi 16 triggering 0 polarity 1 [ 16.983710] Already setup the GSI :16 [ 16.985466] xen: registering gsi 18 triggering 0 polarity 1 [ 16.985472] Already setup the GSI :18 [ 16.987000] pci 0000:01:05.0: >setting latency timer to 64 [ 16.987061] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 16.987063] [drm] No driver support for vblank timestamp query. [ 16.987067] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 [ 17.028520] type=1400 audit(1353068291.597:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=525 comm="apparmor_parser" [ 17.028842] type=1400 audit(1353068291.597:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=525 comm="apparmor_parser" [ 17.029006] type=1400 audit(1353068291.597:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser" [ 17.045608] MCE: In-kernel MCE decoding enabled. [ 17.046968] EDAC MC: Ver: 2.1.0 [ 17.053698] AMD64 EDAC driver v3.4.0 [ 17.054261] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 17.054390] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 17.054502] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 17.054579] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 17.054665] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 17.055133] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251) [ 17.055140] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.055803] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 [ 17.055897] sp5100_tco: mmio address 0xfec000f0 already in use [ 17.056353] EDAC amd64: DRAM ECC disabled. [ 17.056367] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 17.056367] Either enable ECC checking or force module loading by setting ''ecc_enable_override''. [ 17.056367] (Note that use of the override may cause unknown side effects.) [ 17.056371] xen: registering gsi 19 triggering 0 polarity 1 [ 17.056375] Already setup the GSI :19 [ 17.056492] snd_hda_intel 0000:01:05.1: >setting latency timer to 64 [ 17.061171] lp0: using parport0 (interrupt-driven). [ 17.070118] microcode: CPU0: patch_level=0x00000000 [ 17.164954] ppdev: user-space parallel port driver [ 17.184414] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin [ 17.184565] microcode: CPU1: patch_level=0x00000000 [ 17.190442] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin [ 17.190460] microcode: CPU2: patch_level=0x00000000 [ 17.193223] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin [ 17.193237] microcode: CPU3: patch_level=0x00000000 [ 17.195957] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin [ 17.195967] microcode: CPU4: patch_level=0x00000000 [ 17.198780] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin [ 17.198796] microcode: CPU5: patch_level=0x00000000 [ 17.201368] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin [ 17.201460] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 17.298208] r8169 0000:03:00.0: >eth0: link down [ 17.298246] r8169 0000:03:00.0: >eth0: link down [ 17.298554] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.083014] init: udev-fallback-graphics main process (862) terminated with status 1 [ 19.140917] init: plymouth main process (369) killed by ABRT signal [ 19.142456] init: plymouth-splash main process (872) terminated with status 2 [ 19.986969] r8169 0000:03:00.0: >eth0: link up [ 19.987615] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.652324] init: plymouth-log main process (891) terminated with status 1 [ 22.675210] init: plymouth-upstart-bridge main process (920) terminated with status 1 [ 29.159063] init: failsafe main process (894) killed by TERM signal [ 29.323900] type=1400 audit(1353068303.893:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1064 comm="apparmor_parser" [ 29.324624] type=1400 audit(1353068303.893:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1064 comm="apparmor_parser" [ 29.325014] type=1400 audit(1353068303.893:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1064 comm="apparmor_parser" [ 29.325095] type=1400 audit(1353068303.897:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1066 comm="apparmor_parser" [ 29.560404] Event-channel device installed. [ 29.962359] init: plymouth-stop pre-start process (1229) terminated with status 1 ==== /proc/cpuinfo === processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 2 model name : AMD FX(tm)-6300 Six-Core Processor stepping : 0 cpu MHz : 3515.588 cache size : 2048 KB fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu de tsc msr pae cx8 apic cmov pat clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm constant_tsc rep_good nopl nonstop_tsc extd_apicid pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 popcnt aes f16c hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch xop fma4 tce tbm perfctr_core arat cpb hw_pstate bogomips : 7031.17 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro ==== wintest.cfg ====(This has been reconfigured a lot, to test potential LVM issues, and between 4.2 and 4.1.3) builder = "hvm" kernel="/usr/lib/xen-4.1/boot/hvmloader" device_model="/usr/lib/xen-4.1/bin/qemu-dm" name="wintest" memory=2048 vcpus=2 vfb=[ "type=vnc,vnclisten=0.0.0.0,vncdisplay=2,vncpasswd=" ] disk = ["phy:/dev/cnG0/wintest,hda,w","file:/mnt/isos/6001.18000.080118-1840_x86fre_Server_en-us-KRMSFRE_EN_DVD.iso,hdc,r"] boot="cd" usbdevice="tablet"
Alexandre Kouznetsov
2012-Nov-16 16:11 UTC
Re: Hard reset on starting HVM dom0, multiple kernels, distros, xen versions
El 16/11/12 06:45, Sam Mulvey escribió:> So far I''ve tried: > Arch Linux, Xen 4.2.0 > Fedora 17, Xen 4.1.3 > Ubuntu 12.10, Xen 4.1.3 > XCP 1.6 beta (which appears to work)What is hard resetted? Your host system? In that case I suggest you troubleshoot your hardware, specially memory and CPU. memtest and cpuburn works. -- Alexandre Kouznetsov
Sam Mulvey
2012-Nov-16 18:24 UTC
Re: Hard reset on starting HVM dom0, multiple kernels, distros, xen versions
On Nov 16, 2012, at 8:11 AM, Alexandre Kouznetsov <alk@ondore.com> wrote:> What is hard resetted? Your host system? > In that case I suggest you troubleshoot your hardware, specially memory and CPU. > > memtest and cpuburn works.Memtest has yet to uncover a problem. Cpuburn is next, but this''ll be the second time checked it. -Sam _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users
Sam Mulvey
2012-Nov-17 00:34 UTC
Re: Hard reset on starting HVM dom0, multiple kernels, distros, xen versions
On Nov 16, 2012, at 10:24 AM, Sam Mulvey <sam@tacomatelematics.com> wrote:> On Nov 16, 2012, at 8:11 AM, Alexandre Kouznetsov <alk@ondore.com> wrote: > >> What is hard resetted? Your host system? >> In that case I suggest you troubleshoot your hardware, specially memory and CPU. >> >> memtest and cpuburn works. > > > Memtest has yet to uncover a problem. Cpuburn is next, but this''ll be the second time checked it. > > -Sam >Memtest and cpuburn for half an hour encountered no issues. I haven''t had any problems with other hardware. Is there something else I can look at to debug? -Sam _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users
Alexandre Kouznetsov
2012-Nov-17 00:57 UTC
Re: Hard reset on starting HVM dom0, multiple kernels, distros, xen versions
Hello. El 16/11/12 18:34, Sam Mulvey escribió:> Memtest and cpuburn for half an hour encountered no issues. I haven''t > had any problems with other hardware. Is there something else I can > look at to debug?Not much. Analog hardware things: temperature, PSU capacity/quality, some loose connector, static electricity. I noticed that Xen you are using is version 4.1 or grater. I use 4.0 myself, it have proven to be very stable, so a problem like one you describe immediately makes me think it''s hardware issue. I guess it''s could be a good idea to make sure the problem is reproduceable with a known stable Xen hypervisor (I use Debian Squeeze''s one, 4.0.1 to be precise). If so, we can isolate it to hardware failure/incompatibility, of a nature still unknown. This list is monitored by people from Xen development team, maybe they can give a better clue. Until then, a formal bug report is the way to go, if the problem does not shows up with a known stable version. -- Alexandre Kouznetsov
Adam Goryachev
2012-Nov-17 02:00 UTC
Re: Hard reset on starting HVM dom0, multiple kernels, distros, xen versions
On 17/11/12 11:57, Alexandre Kouznetsov wrote:> Hello. > > El 16/11/12 18:34, Sam Mulvey escribió: >> Memtest and cpuburn for half an hour encountered no issues. I haven''t >> had any problems with other hardware. Is there something else I can >> look at to debug? > Not much. Analog hardware things: temperature, PSU capacity/quality, > some loose connector, static electricity. > > I noticed that Xen you are using is version 4.1 or grater. I use 4.0 > myself, it have proven to be very stable, so a problem like one you > describe immediately makes me think it''s hardware issue. > > I guess it''s could be a good idea to make sure the problem is > reproduceable with a known stable Xen hypervisor (I use Debian > Squeeze''s one, 4.0.1 to be precise). If so, we can isolate it to > hardware failure/incompatibility, of a nature still unknown. > > This list is monitored by people from Xen development team, maybe they > can give a better clue. Until then, a formal bug report is the way to > go, if the problem does not shows up with a known stable version. >Actually, I''ve seen this a number of times on various hardware using Debian Stable versions of xen. The first time I spent over 10 hours trying different things to make it work (virtualise an existing windows server 2003 using dd to copy the old drive to the new). Finally, an upgrade to debian testing resolved the issue immediately. Since then, I''ve frequently used debian testing versions, which has always resolved the issue for me. So I would point the finger at software. PS, the hardware I''ve had this problem on with debian stable (first time) had been in production for almost 12 months with debian testing and has been rock solid. Regards, Adam -- Adam Goryachev Website Managers www.websitemanagers.com.au
Guido Hecken
2012-Nov-17 10:41 UTC
Hard reset on starting HVM dom0, multiple kernels, distros, xen versions
-----Ursprüngliche Nachricht----- Von: xen-users-bounces@lists.xen.org [mailto:xen-users-bounces@lists.xen.org] Im Auftrag von Adam Goryachev Gesendet: Samstag, 17. November 2012 03:01 An: xen-users@lists.xen.org Betreff: Re: [Xen-users] Hard reset on starting HVM dom0, multiple kernels, distros, xen versions On 17/11/12 11:57, Alexandre Kouznetsov wrote:> Hello. > > El 16/11/12 18:34, Sam Mulvey escribió: >> Memtest and cpuburn for half an hour encountered no issues. I haven''t >> had any problems with other hardware. Is there something else I can >> look at to debug? > Not much. Analog hardware things: temperature, PSU capacity/quality, > some loose connector, static electricity. > > I noticed that Xen you are using is version 4.1 or grater. I use 4.0 > myself, it have proven to be very stable, so a problem like one you > describe immediately makes me think it''s hardware issue. > > I guess it''s could be a good idea to make sure the problem is > reproduceable with a known stable Xen hypervisor (I use Debian > Squeeze''s one, 4.0.1 to be precise). If so, we can isolate it to > hardware failure/incompatibility, of a nature still unknown. > > This list is monitored by people from Xen development team, maybe they > can give a better clue. Until then, a formal bug report is the way to > go, if the problem does not shows up with a known stable version. >Actually, I''ve seen this a number of times on various hardware using Debian Stable versions of xen. The first time I spent over 10 hours trying different things to make it work (virtualise an existing windows server 2003 using dd to copy the old drive to the new). Finally, an upgrade to debian testing resolved the issue immediately. Since then, I''ve frequently used debian testing versions, which has always resolved the issue for me. So I would point the finger at software. PS, the hardware I''ve had this problem on with debian stable (first time) had been in production for almost 12 months with debian testing and has been rock solid. [GH] Same here, all of our xen hypervsiors are running under debian squeeze without any problems. At the moment I''m testing debian wheezy with xen 4.1.3, everything seems to run fine. All machines using HVM or Paravirtualization run stable and with good performance. As others already advised here, check your hardware and test with squeeze or wheezy. The squeeze/wheezy hypervisors are installed and configured by using preseed in ~15 minutes - assumed you have a functional netboot environment and a working preseed-file. Just my 2 cents Guido
Sam Mulvey
2012-Nov-20 07:11 UTC
Re: Hard reset on starting HVM dom0, multiple kernels, distros, xen versions
On Nov 17, 2012, at 2:41 AM, Guido Hecken wrote:> [GH] > Same here, all of our xen hypervsiors are running under debian squeeze without any problems. > At the moment I''m testing debian wheezy with xen 4.1.3, everything seems to run fine. All machines using HVM or Paravirtualization run stable and with good performance. > > As others already advised here, check your hardware and test with squeeze or wheezy. > The squeeze/wheezy hypervisors are installed and configured by using preseed in ~15 minutes - assumed you have a functional netboot environment and a working preseed-file. > > Just my 2 cents > GuidoI gave that a shot, and the same. A new BIOS for the motherboard came out last week, and that fixed it. Hardware after all! Something to keep in mind with recent processors, so I figured I''d post it for completeness. -Sam _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users