I''m needing to put a network card on a test server XCP 1.0. I''m seeing the citrix hcl (http://hcl.xensource.com) and I''m a doubt. I base that on which version to look for a compatible card? If the kernel is the same as in 5.6.0 FP1, but if the version of XCP uses the hypervisor 3.4.2 neither appears on the list. ps: I had a RTL-8169 but stopped working with update 0.5 for 1.0. It seems that this happened also with those who have upgraded from 5.6.0 to 5.6.0 FP1 . I tried to modify /etc/modprobe.conf inserting "options r8169 use_dac=1", but without effect. Thanks Roberto - São Carlos - SP - Brasil _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Hi Roberto, For the XenServer HCL, you should be able to trust that the 5.6 FP1 recommendations will work with XCP 1.0. I''m not sure how to help you with your current NIC problem, though. Mike On 17/03/11 11:06, Marcelo Terra wrote:> I''m needing to put a network card on a test server XCP 1.0. > > I''m seeing the citrix hcl (http://hcl.xensource.com) and I''m a doubt. I base > that on which version to look for a compatible card? > > If the kernel is the same as in 5.6.0 FP1, but if the > version of XCP uses the hypervisor 3.4.2 neither appears on the list. > > ps: I had a RTL-8169 but stopped working with update 0.5 for 1.0. It > seems that this happened also with those who have upgraded > from 5.6.0 to 5.6.0 FP1. > I tried > to modify /etc/modprobe.conf inserting "options r8169 use_dac=1", but without effect. > > Thanks > > Roberto - São Carlos - SP - Brasil_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Thu, Mar 17, 2011 at 7:06 AM, Marcelo Terra <terradc@gmail.com> wrote:> I''m needing to put a network card on a test server XCP 1.0. > > I''m seeing the citrix hcl (http://hcl.xensource.com) and I''m a doubt. I base > that on which version to look for a compatible card? > > If the kernel is the same as in 5.6.0 FP1, but if the > version of XCP uses the hypervisor 3.4.2 neither appears on the list. > > ps: I had a RTL-8169 but stopped working with update 0.5 for 1.0. It > seems that this happened also with those who have upgraded > from 5.6.0 to 5.6.0 FP1. > I tried > to modify /etc/modprobe.conf inserting "options r8169 use_dac=1", but without effect. > Thanks >Other people have reported that that fix has worked. For more tips see: http://xen.markmail.org/search/?q=xcp+xenserver+from%3A%22Todd+Deshane%22#query:xcp%20xenserver%20from%3A%22Todd%20Deshane%22+page:1+mid:4odnyzjoqaix5e3j+state:results Hope that helps. Thanks, Todd> Roberto - São Carlos - SP - Brasil > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >-- Todd Deshane http://www.linkedin.com/in/deshantm http://www.xen.org/products/cloudxen.html _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Thu, Mar 17, 2011 at 4:16 PM, Marcelo Terra <terradc@gmail.com> wrote:> Hi Tood > Not for me. > > Configuration: > Motherboard: DP43TF Intel > Processor: Core 2 Quad Q9400 2.67 Ghz > Memory: 8 GB DDR2 800 (I tested also with 4gb) > NIC: Realtek RTL8169SC > Thanks >Best to keep the discussion on list maybe others will have suggestions too. You did reboot the server right? Have you tried further debugging? kernel logs, etc.? Are you able to try another NIC? Thanks, Todd> Roberto - São Carlos - SP - Brasil > > 2011/3/17 Todd Deshane <todd.deshane@xen.org> >> >> On Thu, Mar 17, 2011 at 7:06 AM, Marcelo Terra <terradc@gmail.com> wrote: >> > I''m needing to put a network card on a test server XCP 1.0. >> > >> > I''m seeing the citrix hcl (http://hcl.xensource.com) and I''m a doubt. I >> > base >> > that on which version to look for a compatible card? >> > >> > If the kernel is the same as in 5.6.0 FP1, but if the >> > version of XCP uses the hypervisor 3.4.2 neither appears on the list. >> > >> > ps: I had a RTL-8169 but stopped working with update 0.5 for 1.0. It >> > seems that this happened also with those who have upgraded >> > from 5.6.0 to 5.6.0 FP1. >> > I tried >> > >> > to modify /etc/modprobe.conf inserting "options r8169 use_dac=1", but without effect. >> > Thanks >> > >> Other people have reported that that fix has worked. >> >> For more tips see: >> >> >> http://xen.markmail.org/search/?q=xcp+xenserver+from%3A%22Todd+Deshane%22#query:xcp%20xenserver%20from%3A%22Todd%20Deshane%22+page:1+mid:4odnyzjoqaix5e3j+state:results >> >> Hope that helps. >> >> Thanks, >> Todd >> >> > Roberto - São Carlos - SP - Brasil >> > _______________________________________________ >> > Xen-users mailing list >> > Xen-users@lists.xensource.com >> > http://lists.xensource.com/xen-users >> > >> >> >> >> -- >> Todd Deshane >> http://www.linkedin.com/in/deshantm >> http://www.xen.org/products/cloudxen.html > >-- Todd Deshane http://www.linkedin.com/in/deshantm http://www.xen.org/products/cloudxen.html _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Fri, Mar 18, 2011 at 11:29 AM, Marcelo Terra <terradc@gmail.com> wrote:> Hi Todd, > > Some things tried: > - Replace the NIC for a RTL8139 (changing modprobe or no) - Same result. > - Install a new driver (r8169.ko.6.014) - No work. > - Not able to compile the driver, because this machine does > not have Internet access. > - It installs normally acquire ip, but not communication. > - When replacing the cable and use an on-board NIC intel e1000e(chipset > 82567V-2) everything works normally. > > Every attempt reboot the server. > Attempts were made. Still more things I can test if they are suggested. >Thanks for the information. Do keep this on list as it may help others or help others to give suggestions. Thanks, Todd> Thanks > > Roberto - São Carlos - SP - Brasil > 2011/3/17 Todd Deshane <todd.deshane@xen.org> >> >> Best to keep the discussion on list maybe others will have suggestions >> too. >> >> You did reboot the server right? >> >> Have you tried further debugging? kernel logs, etc.? >> >> Are you able to try another NIC? >> >> Thanks, >> Todd >> >> >> > Roberto - São Carlos - SP - Brasil >> > >> > 2011/3/17 Todd Deshane <todd.deshane@xen.org> >> >> >> >> On Thu, Mar 17, 2011 at 7:06 AM, Marcelo Terra <terradc@gmail.com> >> >> wrote: >> >> > I''m needing to put a network card on a test server XCP 1.0. >> >> > >> >> > >> >> > I''m seeing the citrix hcl (http://hcl.xensource.com) and I''m a doubt. I >> >> > base >> >> > that on which version to look for a compatible card? >> >> > >> >> > If the kernel is the same as in 5.6.0 FP1, but if the >> >> > version of XCP uses the hypervisor 3.4.2 neither appears on the list. >> >> > >> >> > ps: I had a RTL-8169 but stopped working with update 0.5 for 1.0. It >> >> > seems that this happened also with those who have upgraded >> >> > from 5.6.0 to 5.6.0 FP1. >> >> > I tried >> >> > >> >> > >> >> > to modify /etc/modprobe.conf inserting "options r8169 use_dac=1", but without effect. >> >> > Thanks >> >> > >> >> Other people have reported that that fix has worked. >> >> >> >> For more tips see: >> >> >> >> >> >> >> >> http://xen.markmail.org/search/?q=xcp+xenserver+from%3A%22Todd+Deshane%22#query:xcp%20xenserver%20from%3A%22Todd%20Deshane%22+page:1+mid:4odnyzjoqaix5e3j+state:results >> >> >> >> Hope that helps. >> >> >> >> Thanks, >> >> Todd >> >> >> >> > Roberto - São Carlos - SP - Brasil >> >> > _______________________________________________ >> >> > Xen-users mailing list >> >> > Xen-users@lists.xensource.com >> >> > http://lists.xensource.com/xen-users >> >> > >> >> >> >> >> >> >> >> -- >> >> Todd Deshane >> >> http://www.linkedin.com/in/deshantm >> >> http://www.xen.org/products/cloudxen.html >> > >> > >> >> >> >> -- >> Todd Deshane >> http://www.linkedin.com/in/deshantm >> http://www.xen.org/products/cloudxen.html > >-- Todd Deshane http://www.linkedin.com/in/deshantm http://www.xen.org/products/cloudxen.html _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Thu, Mar 17, 2011 at 08:06:04AM -0300, Marcelo Terra wrote:> I''m needing to put a network card on a test server XCP 1.0. > I''m seeing the citrix hcl ([1]http://hcl.xensource.com) and I''m a doubt. I > base that on which version to look for a compatible card? > If the kernel is the same as in 5.6.0 FP1, but if the > version of XCP uses the hypervisor 3.4.2 neither appears on the list. > ps: I had a RTL-8169 but stopped working with update 0.5 for 1.0. It > seems that this happened also with those who have upgraded > from 5.6.0 to 5.6.0 FP1. > I tried > to modify /etc/modprobe.conf inserting "options r8169 use_dac=1", but without effect. > Thanks > Roberto - São Carlos - SP - Brasil >XCP 1.0.0 matches XenServer 5.6 FP1. Both have Xen hypervisor v3.4.2 (with many patches). -- Pasi _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users