search for: cloudxen

Hi All, I want to test REMUS over XEN, I would like to know the basic steps to be followed . I have installed xen4.1 on debian and i didn''t find any command related to remus, is there any steps which i have to carry out? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I''m needing to put a network card on a test server XCP 1.0. I''m seeing the citrix hcl (http://hcl.xensource.com) and I''m a doubt. I base that on which version to look for a compatible card? If the kernel is the same as in 5.6.0 FP1, but if the version of XCP uses the hypervisor 3.4.2 neither appears on the list. ps: I had a RTL-8169 but stopped working with update 0.5

Hello Everyone, I am new with XCP. I''ve setup several hosts with* XCP 1.0* and manage it through XenCenter and command console. Each host has two NICs, one (xenbr0) connected to a physical switch for Internet (said sw1), the other (xenbr3) connected to a physical switch for internal network (said sw2). I am trying to setup VMs and VLANs on xenbr3. I created a virtual bridge by

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy

...ev/mapper/vg_f14-lvroot > nomodeset >         module /initramfs-2.6.32.40.img > ~ > > > > Please help me through this, I will be very thankful to > you......................... > .... > -- Todd Deshane http://www.linkedin.com/in/deshantm http://www.xen.org/products/cloudxen.html http://runningxen.com/ _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Does Xen Cloud Platform (XCP) support the notion of a driver domain? I can assign a VIF to a domain, but it seems that I can only attach that VIF to a network. What I''d like to do is attach the front-end VIF in one domain to a backend running in another domain. The second domain will control the physical interface (via PCI passthrough). This use case is easily supported using Xen +

Hi List, is it possible with the virt-manager to choose a drbd device? Example: 9:testsever Connected Primary/Secondary UpToDate/UpToDate C is running on /dev/sda9 but I can´t use it as a drive. (syntax?) Best, Mike _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Recently I installed Xen on my computer.But there are some problems during the starting time. The /var/log/xen/xend.log is follows: [2011-06-10 14:24:36 1395] DEBUG (XendDomainInfo:1794) Storing domain details: {''cpu/3/availability'': ''online'', ''description'': '''', ''console/limit'': ''1048576'',

So Working on CEntOS 5 I am trying to sett up Xen with 2 bridges, one that connects dom0 and most of the domU to the physical card and the out to the network. Got that figured out no problem, now i want to have a second bridge that runs a local network for all the doms that doesn''t connect to the network. With code I have found used in multiple places I can easily get 2 bridges, and

Hello, I have a Gentoo Linux guest, which was working very well with the past xm tool stack. Since the migration to xen-4.1.1 and to the new xl tool stack, I have a problem for the IP assignation. Actually, when dhcpcd starts at boot time the IP address is not correctly assigned. This also happens if I perform "dhcpcd eth0" once I''ve accessed to the guest shell. I

Hi all, I follow instructions(http://wiki.xensource.com/xenwiki/XenParavirtOps) to build XEN and dom0 kernel. Building XEN has no problem, but there is an error which I cannot solve to build dom0 kernel. The brief instructions for building dom0 are get linux-2.6-xen code from git and make ARCH=x86_64 menuconfig, finally generate kernel.deb. (I did every step exactly as the web page says)

Dear all, How to make XCP cannot management by XenCenter? We have an environment about 10 XCP host, and provide about 50 vm for users, We notice that some users want to use XenCenter to connect the XCP host, even they don’t have password, so we want to make XCP cannot use XenCenter and only for console management, is it possible? Sorry for the strange question,

I think the title says it all :) I got far enough along in the Xen documentation that the documentation recommended me to start using XenCenter to manage the server. Why am I being asked by XenCenter to register my XCP 1.0 server? I know it''s similar, but it''s not a Citrix XenServer... ;) >From what I can gather, XCP is open source freeware...correct me if I''m

Hi *, having built Xen 4.1.0 and running my Dom0 on Slackware 13.1, I''m trying to assign different physical network interfaces to different DomU guests: vif = [ ''bridge=ethX'' ] in the DomU configuration files. My /etc/xen/scripts/network-bridge script, however, doesn''t create more than one bridge: root@cen:~# /etc/xen/scripts/network-bridge start

Hello, I have installed the Xen 4.1.1 and a working kernel 2.6.32.43 which supports Xen on a Ubuntu Linux 10.04 LTS. However, I have never successfully booted the Hypervisor and Dom0. The screen is always black after some kernel messages rapidly go by. I think that I may pass the wrong parameters to the kernel or Hypervisor with GRUB2. Can any one share his/her working grub.cfg for GRUB2 with

Good Evenight I try to do working usb''s into domU xen guest, SO of xen server is Debian Squenze 6.0, into HVM guest usb works and can make use but with ParaVirtual guest PV can find this devices with lsusb or into /dev/ directory. Kernel load into xend and guest is the same and is the kernel provided by this package: ii linux-image-2.6.32-5-xen-amd64 2.6.32-35

Dear List, I use Debian Squeeze with Xen dom0 Kernel 2.6.32-5-xen-686, the Xen Hypervisor 4.1 and qemu 4.0. I have installed a HVM domU which contains a Debian Squeeze standard installation. Everytime I start the domU with the ''xm create ..'' command from dom0, the eth0 lan connection gets interrupted and rebuilts. When domU is booted, the dom0 system hangs every minute for

Hi, I am new to citrix xen server. I have sucesfully installed citrix xen server 5.6.1 Fp1(free version) on my system. and through xencenter I have connected citrix xenserver and created vm (centos 5.5 32 bit), Installed Xen-tools in centos. My xenserver and xen vm ip details are below Xenserver Ip address - 192.168.1.5 Netmask - 255.255.255.0 Gateway - 192.168.1.1 which is my xencenter