Hello List If i have a PCI=[08:00.0](example) in any DomU config file the xm shutdown <ID> shuts down this DomU and the Dom0! Otherwise i shutdown this DomU from inside the DomU with halt or shutdown -r now, the Dom0 shuts down to. This happend on Xen 3.4.2 and Xen 4.0 (Kernel 2.6.18.8-xen, 2.6.18.8-xen0) The Operating System to Compile xen was Debian Lenny and the Dom0 os. Without passing Hardware in a DomU, the Domu shuts down clean and the Dom0 keeps running. This is the Xen part of my config, and i can''t find the mistake to solve my problem. Robert # # XEN # CONFIG_XEN_PRIVILEGED_GUEST=y # CONFIG_XEN_UNPRIVILEGED_GUEST is not set CONFIG_XEN_PRIVCMD=y CONFIG_XEN_XENBUS_DEV=y CONFIG_XEN_BACKEND=y CONFIG_XEN_BLKDEV_BACKEND=y CONFIG_XEN_BLKDEV_TAP=y CONFIG_XEN_BLKDEV_TAP2=y CONFIG_XEN_BLKBACK_PAGEMAP=y CONFIG_XEN_NETDEV_BACKEND=y # CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set # CONFIG_XEN_NETDEV_LOOPBACK is not set CONFIG_XEN_PCIDEV_BACKEND=y # CONFIG_XEN_PCIDEV_BACKEND_VPCI is not set CONFIG_XEN_PCIDEV_BACKEND_PASS=y # CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set # CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set # CONFIG_XEN_PCIDEV_BE_DEBUG is not set CONFIG_XEN_TPMDEV_BACKEND=m CONFIG_XEN_SCSI_BACKEND=m CONFIG_XEN_USB_BACKEND=m CONFIG_XEN_BLKDEV_FRONTEND=y CONFIG_XEN_NETDEV_FRONTEND=y # CONFIG_XEN_NETDEV_ACCEL_SFC_FRONTEND is not set CONFIG_XEN_SCSI_FRONTEND=m CONFIG_XEN_USB_FRONTEND=m CONFIG_XEN_USB_FRONTEND_HCD_STATS=y # CONFIG_XEN_USB_FRONTEND_HCD_PM is not set CONFIG_XEN_GRANT_DEV=y CONFIG_XEN_FRAMEBUFFER=y CONFIG_XEN_KEYBOARD=y CONFIG_XEN_SCRUB_PAGES=y CONFIG_XEN_DISABLE_SERIAL=y CONFIG_XEN_SYSFS=y CONFIG_XEN_COMPAT_030002_AND_LATER=y # CONFIG_XEN_COMPAT_030004_AND_LATER is not set # CONFIG_XEN_COMPAT_030100_AND_LATER is not set # CONFIG_XEN_COMPAT_LATEST_ONLY is not set CONFIG_XEN_COMPAT=0x030002 CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y CONFIG_NO_IDLE_HZ=y CONFIG_XEN_SMPBOOT=y CONFIG_XEN_BALLOON=y CONFIG_XEN_DEVMEM=y -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01 _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Tue, Jul 20, 2010 at 10:31:12AM +0200, Tron Loki wrote:> Hello List > > If i have a PCI=[08:00.0](example) in any DomU config file > the xm shutdown <ID> shuts down this DomU and the Dom0! > Otherwise i shutdown this DomU from inside the DomU with halt or shutdown -r now, the Dom0 shuts down to. > This happend on Xen 3.4.2 and Xen 4.0 (Kernel 2.6.18.8-xen, 2.6.18.8-xen0) > The Operating System to Compile xen was Debian Lenny and the Dom0 os. > > > Without passing Hardware in a DomU, the Domu shuts down clean and the Dom0 keeps running. > > This is the Xen part of my config, and i can''t find the mistake to solve my problem. >Does dom0 crash, or does it shutdown cleanly? You might want to enable serial console for capturing the full Xen+dom0kernel messages: http://wiki.xensource.com/xenwiki/XenSerialConsole Also: - are you running the latest linux-2.6.18-xen from http://xenbits.xen.org/linux-2.6.18-xen.hg ? - Did you try updating to Xen 4.0.1-rc4 from http://xenbits.xen.org/xen-4.0-testing.hg -- Pasi> > > # > # XEN > # > CONFIG_XEN_PRIVILEGED_GUEST=y > # CONFIG_XEN_UNPRIVILEGED_GUEST is not set > CONFIG_XEN_PRIVCMD=y > CONFIG_XEN_XENBUS_DEV=y > CONFIG_XEN_BACKEND=y > CONFIG_XEN_BLKDEV_BACKEND=y > CONFIG_XEN_BLKDEV_TAP=y > CONFIG_XEN_BLKDEV_TAP2=y > CONFIG_XEN_BLKBACK_PAGEMAP=y > CONFIG_XEN_NETDEV_BACKEND=y > # CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set > # CONFIG_XEN_NETDEV_LOOPBACK is not set > CONFIG_XEN_PCIDEV_BACKEND=y > # CONFIG_XEN_PCIDEV_BACKEND_VPCI is not set > CONFIG_XEN_PCIDEV_BACKEND_PASS=y > # CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set > # CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set > # CONFIG_XEN_PCIDEV_BE_DEBUG is not set > CONFIG_XEN_TPMDEV_BACKEND=m > CONFIG_XEN_SCSI_BACKEND=m > CONFIG_XEN_USB_BACKEND=m > CONFIG_XEN_BLKDEV_FRONTEND=y > CONFIG_XEN_NETDEV_FRONTEND=y > # CONFIG_XEN_NETDEV_ACCEL_SFC_FRONTEND is not set > CONFIG_XEN_SCSI_FRONTEND=m > CONFIG_XEN_USB_FRONTEND=m > CONFIG_XEN_USB_FRONTEND_HCD_STATS=y > # CONFIG_XEN_USB_FRONTEND_HCD_PM is not set > CONFIG_XEN_GRANT_DEV=y > CONFIG_XEN_FRAMEBUFFER=y > CONFIG_XEN_KEYBOARD=y > CONFIG_XEN_SCRUB_PAGES=y > CONFIG_XEN_DISABLE_SERIAL=y > CONFIG_XEN_SYSFS=y > CONFIG_XEN_COMPAT_030002_AND_LATER=y > # CONFIG_XEN_COMPAT_030004_AND_LATER is not set > # CONFIG_XEN_COMPAT_030100_AND_LATER is not set > # CONFIG_XEN_COMPAT_LATEST_ONLY is not set > CONFIG_XEN_COMPAT=0x030002 > CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y > CONFIG_NO_IDLE_HZ=y > CONFIG_XEN_SMPBOOT=y > CONFIG_XEN_BALLOON=y > CONFIG_XEN_DEVMEM=y > > -- > GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! > Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01 > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
-------- Original-Nachricht --------> Datum: Tue, 20 Jul 2010 15:32:21 +0300 > Von: "Pasi Kärkkäinen" <pasik@iki.fi> > An: Tron Loki <Tron02@gmx.de> > CC: xen-users@lists.xensource.com > Betreff: Re: [Xen-users] pci.backhide> On Tue, Jul 20, 2010 at 10:31:12AM +0200, Tron Loki wrote: > > Hello List > > > > If i have a PCI=[08:00.0](example) in any DomU config file > > the xm shutdown <ID> shuts down this DomU and the Dom0! > > Otherwise i shutdown this DomU from inside the DomU with halt or > shutdown -r now, the Dom0 shuts down to. > > This happend on Xen 3.4.2 and Xen 4.0 (Kernel 2.6.18.8-xen, > 2.6.18.8-xen0) > > The Operating System to Compile xen was Debian Lenny and the Dom0 os. > > > > > > Without passing Hardware in a DomU, the Domu shuts down clean and the > Dom0 keeps running. > > > > This is the Xen part of my config, and i can''t find the mistake to solve > my problem. > > > > Does dom0 crash, or does it shutdown cleanly?If i command in the DomU "reboot" the Dom0 reboots, so i think it shutdown correct.> > You might want to enable serial console for capturing the full > Xen+dom0kernel messages: > http://wiki.xensource.com/xenwiki/XenSerialConsoleI will try to, if it helps.> Also: > - are you running the latest linux-2.6.18-xen from > http://xenbits.xen.org/linux-2.6.18-xen.hg ?No i didn''t I wget the 3.4.2 yesterday unpack an make world and make install, this delivers the 2.6.8.18-xen i think its last stable version from 2.6.18.8, isnt''t it? correct me if im on the wrong way of thinking.> - Did you try updating to Xen 4.0.1-rc4 from > http://xenbits.xen.org/xen-4.0-testing.hgNo i prefered the last stable version 4.0. If i pass through a real nic, the shutdown works fine with pci pass options and the dom0 keeps running after shuting down a DomU. The Dom0 shutdown only happend with onboard nic''s. Robert> > -- Pasi > > > > > > > # > > # XEN > > # > > CONFIG_XEN_PRIVILEGED_GUEST=y > > # CONFIG_XEN_UNPRIVILEGED_GUEST is not set > > CONFIG_XEN_PRIVCMD=y > > CONFIG_XEN_XENBUS_DEV=y > > CONFIG_XEN_BACKEND=y > > CONFIG_XEN_BLKDEV_BACKEND=y > > CONFIG_XEN_BLKDEV_TAP=y > > CONFIG_XEN_BLKDEV_TAP2=y > > CONFIG_XEN_BLKBACK_PAGEMAP=y > > CONFIG_XEN_NETDEV_BACKEND=y > > # CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set > > # CONFIG_XEN_NETDEV_LOOPBACK is not set > > CONFIG_XEN_PCIDEV_BACKEND=y > > # CONFIG_XEN_PCIDEV_BACKEND_VPCI is not set > > CONFIG_XEN_PCIDEV_BACKEND_PASS=y > > # CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set > > # CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set > > # CONFIG_XEN_PCIDEV_BE_DEBUG is not set > > CONFIG_XEN_TPMDEV_BACKEND=m > > CONFIG_XEN_SCSI_BACKEND=m > > CONFIG_XEN_USB_BACKEND=m > > CONFIG_XEN_BLKDEV_FRONTEND=y > > CONFIG_XEN_NETDEV_FRONTEND=y > > # CONFIG_XEN_NETDEV_ACCEL_SFC_FRONTEND is not set > > CONFIG_XEN_SCSI_FRONTEND=m > > CONFIG_XEN_USB_FRONTEND=m > > CONFIG_XEN_USB_FRONTEND_HCD_STATS=y > > # CONFIG_XEN_USB_FRONTEND_HCD_PM is not set > > CONFIG_XEN_GRANT_DEV=y > > CONFIG_XEN_FRAMEBUFFER=y > > CONFIG_XEN_KEYBOARD=y > > CONFIG_XEN_SCRUB_PAGES=y > > CONFIG_XEN_DISABLE_SERIAL=y > > CONFIG_XEN_SYSFS=y > > CONFIG_XEN_COMPAT_030002_AND_LATER=y > > # CONFIG_XEN_COMPAT_030004_AND_LATER is not set > > # CONFIG_XEN_COMPAT_030100_AND_LATER is not set > > # CONFIG_XEN_COMPAT_LATEST_ONLY is not set > > CONFIG_XEN_COMPAT=0x030002 > > CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y > > CONFIG_NO_IDLE_HZ=y > > CONFIG_XEN_SMPBOOT=y > > CONFIG_XEN_BALLOON=y > > CONFIG_XEN_DEVMEM=y > > > > -- > > GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! > > Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01 > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com > > http://lists.xensource.com/xen-users > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users-- Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief! Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Tue, Jul 20, 2010 at 04:53:12PM +0200, Tron Loki wrote:> > -------- Original-Nachricht -------- > > Datum: Tue, 20 Jul 2010 15:32:21 +0300 > > Von: "Pasi Kärkkäinen" <pasik@iki.fi> > > An: Tron Loki <Tron02@gmx.de> > > CC: xen-users@lists.xensource.com > > Betreff: Re: [Xen-users] pci.backhide > > > On Tue, Jul 20, 2010 at 10:31:12AM +0200, Tron Loki wrote: > > > Hello List > > > > > > If i have a PCI=[08:00.0](example) in any DomU config file > > > the xm shutdown <ID> shuts down this DomU and the Dom0! > > > Otherwise i shutdown this DomU from inside the DomU with halt or > > shutdown -r now, the Dom0 shuts down to. > > > This happend on Xen 3.4.2 and Xen 4.0 (Kernel 2.6.18.8-xen, > > 2.6.18.8-xen0) > > > The Operating System to Compile xen was Debian Lenny and the Dom0 os. > > > > > > > > > Without passing Hardware in a DomU, the Domu shuts down clean and the > > Dom0 keeps running. > > > > > > This is the Xen part of my config, and i can''t find the mistake to solve > > my problem. > > > > > > > Does dom0 crash, or does it shutdown cleanly? > If i command in the DomU "reboot" the Dom0 reboots, so i think it shutdown correct. > > > > > You might want to enable serial console for capturing the full > > Xen+dom0kernel messages: > > http://wiki.xensource.com/xenwiki/XenSerialConsole > I will try to, if it helps. > > > Also: > > - are you running the latest linux-2.6.18-xen from > > http://xenbits.xen.org/linux-2.6.18-xen.hg ? > No i didn''t I wget the 3.4.2 yesterday unpack an make world and make install, this delivers the 2.6.8.18-xen i think its last stable version from 2.6.18.8, isnt''t it? correct me if im on the wrong way of thinking. > > > - Did you try updating to Xen 4.0.1-rc4 from > > http://xenbits.xen.org/xen-4.0-testing.hg > No i prefered the last stable version 4.0. >I''m pretty sure 4.0.1-rc4 is more stable than 4.0.0 :)> If i pass through a real nic, the shutdown works fine with pci pass options and the dom0 keeps running after shuting down a DomU. > The Dom0 shutdown only happend with onboard nic''s. >Hmm.. Are you sharing the onboard nic ports between domains? ie. using other port in dom0, and other port in domU? -- Pasi> Robert > > > > > -- Pasi > > > > > > > > > > > # > > > # XEN > > > # > > > CONFIG_XEN_PRIVILEGED_GUEST=y > > > # CONFIG_XEN_UNPRIVILEGED_GUEST is not set > > > CONFIG_XEN_PRIVCMD=y > > > CONFIG_XEN_XENBUS_DEV=y > > > CONFIG_XEN_BACKEND=y > > > CONFIG_XEN_BLKDEV_BACKEND=y > > > CONFIG_XEN_BLKDEV_TAP=y > > > CONFIG_XEN_BLKDEV_TAP2=y > > > CONFIG_XEN_BLKBACK_PAGEMAP=y > > > CONFIG_XEN_NETDEV_BACKEND=y > > > # CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set > > > # CONFIG_XEN_NETDEV_LOOPBACK is not set > > > CONFIG_XEN_PCIDEV_BACKEND=y > > > # CONFIG_XEN_PCIDEV_BACKEND_VPCI is not set > > > CONFIG_XEN_PCIDEV_BACKEND_PASS=y > > > # CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set > > > # CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set > > > # CONFIG_XEN_PCIDEV_BE_DEBUG is not set > > > CONFIG_XEN_TPMDEV_BACKEND=m > > > CONFIG_XEN_SCSI_BACKEND=m > > > CONFIG_XEN_USB_BACKEND=m > > > CONFIG_XEN_BLKDEV_FRONTEND=y > > > CONFIG_XEN_NETDEV_FRONTEND=y > > > # CONFIG_XEN_NETDEV_ACCEL_SFC_FRONTEND is not set > > > CONFIG_XEN_SCSI_FRONTEND=m > > > CONFIG_XEN_USB_FRONTEND=m > > > CONFIG_XEN_USB_FRONTEND_HCD_STATS=y > > > # CONFIG_XEN_USB_FRONTEND_HCD_PM is not set > > > CONFIG_XEN_GRANT_DEV=y > > > CONFIG_XEN_FRAMEBUFFER=y > > > CONFIG_XEN_KEYBOARD=y > > > CONFIG_XEN_SCRUB_PAGES=y > > > CONFIG_XEN_DISABLE_SERIAL=y > > > CONFIG_XEN_SYSFS=y > > > CONFIG_XEN_COMPAT_030002_AND_LATER=y > > > # CONFIG_XEN_COMPAT_030004_AND_LATER is not set > > > # CONFIG_XEN_COMPAT_030100_AND_LATER is not set > > > # CONFIG_XEN_COMPAT_LATEST_ONLY is not set > > > CONFIG_XEN_COMPAT=0x030002 > > > CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y > > > CONFIG_NO_IDLE_HZ=y > > > CONFIG_XEN_SMPBOOT=y > > > CONFIG_XEN_BALLOON=y > > > CONFIG_XEN_DEVMEM=y > > > > > > -- > > > GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! > > > Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01 > > > > > > _______________________________________________ > > > Xen-users mailing list > > > Xen-users@lists.xensource.com > > > http://lists.xensource.com/xen-users > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com > > http://lists.xensource.com/xen-users > > -- > Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief! > Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Apparently Analagous Threads
- [SPAM] The Infamous "Device 0 (vif) could not be connected. Hotplug scripts not working."
- IRQ Problems with kernel 2.6.18.8 when PCI passthrough to PVM''s
- IRQ Problems with kernel 2.6.18.8 when PCI passthrough to PVM''s
- 3w-xxxx / 3ware 8006-2LP corruption issues using Xen kernel
- dom0 - tar: Skipping to next header