Mr. Teo En Ming (Zhang Enming)
2009-Nov-01 08:32 UTC
[Xen-users] Picture Tutorial: How to Setup Slackware64 13.0 HVM domU with Xen 3.5-unstable pv-ops Dom0 Kernel 2.6.31.4 in Fedora 11 x86-64 Dom0
Hi, I have just installed Slackware64 13.0 Linux as a HVM guest with Xen 3.5-unstable changeset 20143 pv-ops dom0 kernel 2.6.31.4. For more details, please refer to the following link: http://enmingteo.wordpress.com/2009/11/01/picture-tutorial-how-to-setup-slackware64-13-0-hvm-domu-with-xen-3-5-unstable-pv-ops-dom0-kernel-2-6-31-4-in-fedora-11-x86-64-dom0/ There are 83 screenshots so far at this moment. I have encountered a problem with the virtual network interface eth0 in the Slackware virtual machine. According to Slackware, there''s no such interface. lspci -v output shows a Realtek virtual ethernet controller by Xensource. The kernel model 8139too has been loaded. lsmod shows it. I have checked /etc/rc.d/rc.inet1.conf and eth0 is configured for DHCP. Windows XP HVM virtual network interface works for DHCP. Then I tried to restart the networking subsystem by issuing the following commands: # /etc/rc.d/rc.inet1 stop # /etc/rc.d/rc.inet1 start "ifconfig -a" output only shows up loopback interface lo and not eth0. Screenshots pertaining to the problem are here: http://enmingteo.files.wordpress.com/2009/11/slackware64-82.png http://enmingteo.files.wordpress.com/2009/11/slackware64-83.png Please advise. Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering) Alma Maters: (1) Singapore Polytechnic (2) National University of Singapore My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com My Youtube videos: http://www.youtube.com/user/enmingteo Email: space.time.universe@gmail.com MSN: teoenming@hotmail.com Mobile Phone (SingTel): +65-9648-9798 Mobile Phone (Starhub Prepaid): +65-8369-2618 Age: 31 (as at 30 Oct 2009) Height: 1.78 meters Race: Chinese Dialect: Hokkien Street: Bedok Reservoir Road Country: Singapore _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Mr. Teo En Ming (Zhang Enming)
2009-Nov-01 09:35 UTC
[Xen-devel] Re: Picture Tutorial: How to Setup Slackware64 13.0 HVM domU with Xen 3.5-unstable pv-ops Dom0 Kernel 2.6.31.4 in Fedora 11 x86-64 Dom0
"brctl show" shows the virtual network interface eth0 of domain ID 2
(of
Slackware64 13.0 HVM) added to the ethernet bridge eth0 in dom0.
[root@fedora11-x86-64-host xen]# brctl show
bridge name bridge id STP enabled interfaces
eth0 no peth0
tap2.0
vif2.0
-rwxr-xr-x 1 root root 1289 2009-11-01 13:17 qemu-dm-slackware64.log
domid: 2
qemu: the number of cpus is 2
config qemu network with xen bridge for tap2.0 eth0
Watching /local/domain/0/device-model/2/logdirty/next-active
Watching /local/domain/0/device-model/2/command
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 05686adf-dd94-b685-2a2b-112890bfee1d
Time offset set 0
cirrus_vga_enabled
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
xs_read(/vm/05686adf-dd94-b685-2a2b-112890bfee1d/log-throttling): read error
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw
state.
xs_read(/local/domain/0/device-model/2/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error.
/vm/05686adf-dd94-b685-2a2b-112890bfee1d/vncpasswd.
medium change watch on `hdc'' (index: 1):
/media/hitachi/slackware64-13.0-install-dvd.iso
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
cirrus vga map change while on lfb mode
mapping vram to e0000000 - e0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw
state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro
state.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
Engineering)
Alma Maters:
(1) Singapore Polytechnic
(2) National University of Singapore
My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
My Youtube videos: http://www.youtube.com/user/enmingteo
Email: space.time.universe@gmail.com
MSN: teoenming@hotmail.com
Mobile Phone (SingTel): +65-9648-9798
Mobile Phone (Starhub Prepaid): +65-8369-2618
Age: 31 (as at 30 Oct 2009)
Height: 1.78 meters
Race: Chinese
Dialect: Hokkien
Street: Bedok Reservoir Road
Country: Singapore
On Sun, Nov 1, 2009 at 4:32 PM, Mr. Teo En Ming (Zhang Enming) <
space.time.universe@gmail.com> wrote:
> Hi,
>
> I have just installed Slackware64 13.0 Linux as a HVM guest with Xen
> 3.5-unstable changeset 20143 pv-ops dom0 kernel 2.6.31.4. For more details,
> please refer to the following link:
>
>
>
http://enmingteo.wordpress.com/2009/11/01/picture-tutorial-how-to-setup-slackware64-13-0-hvm-domu-with-xen-3-5-unstable-pv-ops-dom0-kernel-2-6-31-4-in-fedora-11-x86-64-dom0/
>
> There are 83 screenshots so far at this moment.
>
> I have encountered a problem with the virtual network interface eth0 in the
> Slackware virtual machine. According to Slackware, there''s no such
> interface.
>
> lspci -v output shows a Realtek virtual ethernet controller by Xensource.
>
> The kernel model 8139too has been loaded. lsmod shows it.
>
> I have checked /etc/rc.d/rc.inet1.conf and eth0 is configured for DHCP.
> Windows XP HVM virtual network interface works for DHCP.
>
> Then I tried to restart the networking subsystem by issuing the following
> commands:
>
> # /etc/rc.d/rc.inet1 stop
>
> # /etc/rc.d/rc.inet1 start
>
> "ifconfig -a" output only shows up loopback interface lo and not
eth0.
>
> Screenshots pertaining to the problem are here:
>
> http://enmingteo.files.wordpress.com/2009/11/slackware64-82.png
>
> http://enmingteo.files.wordpress.com/2009/11/slackware64-83.png
>
> Please advise.
>
> Thank you.
>
> --
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> Engineering)
> Alma Maters:
> (1) Singapore Polytechnic
> (2) National University of Singapore
> My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
> My Youtube videos: http://www.youtube.com/user/enmingteo
> Email: space.time.universe@gmail.com
> MSN: teoenming@hotmail.com
> Mobile Phone (SingTel): +65-9648-9798
> Mobile Phone (Starhub Prepaid): +65-8369-2618
> Age: 31 (as at 30 Oct 2009)
> Height: 1.78 meters
> Race: Chinese
> Dialect: Hokkien
> Street: Bedok Reservoir Road
> Country: Singapore
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Mr. Teo En Ming (Zhang Enming)
2009-Nov-01 10:07 UTC
[Xen-users] Re: Picture Tutorial: How to Setup Slackware64 13.0 HVM domU with Xen 3.5-unstable pv-ops Dom0 Kernel 2.6.31.4 in Fedora 11 x86-64 Dom0
I have solved the problem. I need to "modprobe 8139cp" too. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering) Alma Maters: (1) Singapore Polytechnic (2) National University of Singapore My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com My Youtube videos: http://www.youtube.com/user/enmingteo Email: space.time.universe@gmail.com MSN: teoenming@hotmail.com Mobile Phone (SingTel): +65-9648-9798 Mobile Phone (Starhub Prepaid): +65-8369-2618 Age: 31 (as at 30 Oct 2009) Height: 1.78 meters Race: Chinese Dialect: Hokkien Street: Bedok Reservoir Road Country: Singapore On Sun, Nov 1, 2009 at 5:35 PM, Mr. Teo En Ming (Zhang Enming) < space.time.universe@gmail.com> wrote:> "brctl show" shows the virtual network interface eth0 of domain ID 2 (of > Slackware64 13.0 HVM) added to the ethernet bridge eth0 in dom0. > > [root@fedora11-x86-64-host xen]# brctl show > bridge name bridge id STP enabled interfaces > eth0 no peth0 > tap2.0 > vif2.0 > > -rwxr-xr-x 1 root root 1289 2009-11-01 13:17 qemu-dm-slackware64.log > > domid: 2 > qemu: the number of cpus is 2 > config qemu network with xen bridge for tap2.0 eth0 > Watching /local/domain/0/device-model/2/logdirty/next-active > Watching /local/domain/0/device-model/2/command > qemu_map_cache_init nr_buckets = 10000 size 4194304 > shared page at pfn feffd > buffered io page at pfn feffb > Guest uuid = 05686adf-dd94-b685-2a2b-112890bfee1d > Time offset set 0 > cirrus_vga_enabled > populating video RAM at ff000000 > mapping video RAM from ff000000 > Register xen platform. > Done register platform. > xs_read(/vm/05686adf-dd94-b685-2a2b-112890bfee1d/log-throttling): read > error > platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw > state. > xs_read(/local/domain/0/device-model/2/xen_extended_power_mgmt): read error > xs_read(): vncpasswd get error. > /vm/05686adf-dd94-b685-2a2b-112890bfee1d/vncpasswd. > medium change watch on `hdc'' (index: 1): > /media/hitachi/slackware64-13.0-install-dvd.iso > I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 > I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 > cirrus vga map change while on lfb mode > mapping vram to e0000000 - e0400000 > platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw > state. > platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro > state. > > > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical > Engineering) > Alma Maters: > (1) Singapore Polytechnic > (2) National University of Singapore > My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com > My Youtube videos: http://www.youtube.com/user/enmingteo > Email: space.time.universe@gmail.com > MSN: teoenming@hotmail.com > Mobile Phone (SingTel): +65-9648-9798 > Mobile Phone (Starhub Prepaid): +65-8369-2618 > Age: 31 (as at 30 Oct 2009) > Height: 1.78 meters > Race: Chinese > Dialect: Hokkien > Street: Bedok Reservoir Road > Country: Singapore > > On Sun, Nov 1, 2009 at 4:32 PM, Mr. Teo En Ming (Zhang Enming) < > space.time.universe@gmail.com> wrote: > >> Hi, >> >> I have just installed Slackware64 13.0 Linux as a HVM guest with Xen >> 3.5-unstable changeset 20143 pv-ops dom0 kernel 2.6.31.4. For more details, >> please refer to the following link: >> >> >> http://enmingteo.wordpress.com/2009/11/01/picture-tutorial-how-to-setup-slackware64-13-0-hvm-domu-with-xen-3-5-unstable-pv-ops-dom0-kernel-2-6-31-4-in-fedora-11-x86-64-dom0/ >> >> There are 83 screenshots so far at this moment. >> >> I have encountered a problem with the virtual network interface eth0 in >> the Slackware virtual machine. According to Slackware, there''s no such >> interface. >> >> lspci -v output shows a Realtek virtual ethernet controller by Xensource. >> >> The kernel model 8139too has been loaded. lsmod shows it. >> >> I have checked /etc/rc.d/rc.inet1.conf and eth0 is configured for DHCP. >> Windows XP HVM virtual network interface works for DHCP. >> >> Then I tried to restart the networking subsystem by issuing the following >> commands: >> >> # /etc/rc.d/rc.inet1 stop >> >> # /etc/rc.d/rc.inet1 start >> >> "ifconfig -a" output only shows up loopback interface lo and not eth0. >> >> Screenshots pertaining to the problem are here: >> >> http://enmingteo.files.wordpress.com/2009/11/slackware64-82.png >> >> http://enmingteo.files.wordpress.com/2009/11/slackware64-83.png >> >> Please advise. >> >> Thank you. >> >> -- >> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical >> Engineering) >> Alma Maters: >> (1) Singapore Polytechnic >> (2) National University of Singapore >> My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com >> My Youtube videos: http://www.youtube.com/user/enmingteo >> Email: space.time.universe@gmail.com >> MSN: teoenming@hotmail.com >> Mobile Phone (SingTel): +65-9648-9798 >> Mobile Phone (Starhub Prepaid): +65-8369-2618 >> Age: 31 (as at 30 Oct 2009) >> Height: 1.78 meters >> Race: Chinese >> Dialect: Hokkien >> Street: Bedok Reservoir Road >> Country: Singapore >> > > > > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Mr. Teo En Ming (Zhang Enming)
2009-Nov-01 11:11 UTC
[Xen-devel] Re: Picture Tutorial: How to Setup Slackware64 13.0 HVM domU with Xen 3.5-unstable pv-ops Dom0 Kernel 2.6.31.4 in Fedora 11 x86-64 Dom0
Please refer to the following screenshots for solving the problem: http://enmingteo.files.wordpress.com/2009/11/slackware64-84.png http://enmingteo.files.wordpress.com/2009/11/slackware64-85.png http://enmingteo.files.wordpress.com/2009/11/slackware64-86.png http://enmingteo.files.wordpress.com/2009/11/slackware64-87.png http://enmingteo.files.wordpress.com/2009/11/slackware64-88.png http://enmingteo.files.wordpress.com/2009/11/slackware64-89.png http://enmingteo.files.wordpress.com/2009/11/slackware64-90.png -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering) Alma Maters: (1) Singapore Polytechnic (2) National University of Singapore My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com My Youtube videos: http://www.youtube.com/user/enmingteo Email: space.time.universe@gmail.com MSN: teoenming@hotmail.com Mobile Phone (SingTel): +65-9648-9798 Mobile Phone (Starhub Prepaid): +65-8369-2618 Age: 31 (as at 30 Oct 2009) Height: 1.78 meters Race: Chinese Dialect: Hokkien Street: Bedok Reservoir Road Country: Singapore On Sun, Nov 1, 2009 at 6:07 PM, Mr. Teo En Ming (Zhang Enming) < space.time.universe@gmail.com> wrote:> I have solved the problem. I need to "modprobe 8139cp" too. > > > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical > Engineering) > Alma Maters: > (1) Singapore Polytechnic > (2) National University of Singapore > My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com > My Youtube videos: http://www.youtube.com/user/enmingteo > Email: space.time.universe@gmail.com > MSN: teoenming@hotmail.com > Mobile Phone (SingTel): +65-9648-9798 > Mobile Phone (Starhub Prepaid): +65-8369-2618 > Age: 31 (as at 30 Oct 2009) > Height: 1.78 meters > Race: Chinese > Dialect: Hokkien > Street: Bedok Reservoir Road > Country: Singapore > > On Sun, Nov 1, 2009 at 5:35 PM, Mr. Teo En Ming (Zhang Enming) < > space.time.universe@gmail.com> wrote: > >> "brctl show" shows the virtual network interface eth0 of domain ID 2 (of >> Slackware64 13.0 HVM) added to the ethernet bridge eth0 in dom0. >> >> [root@fedora11-x86-64-host xen]# brctl show >> bridge name bridge id STP enabled interfaces >> eth0 no peth0 >> >> tap2.0 >> >> vif2.0 >> >> -rwxr-xr-x 1 root root 1289 2009-11-01 13:17 qemu-dm-slackware64.log >> >> domid: 2 >> qemu: the number of cpus is 2 >> config qemu network with xen bridge for tap2.0 eth0 >> Watching /local/domain/0/device-model/2/logdirty/next-active >> Watching /local/domain/0/device-model/2/command >> qemu_map_cache_init nr_buckets = 10000 size 4194304 >> shared page at pfn feffd >> buffered io page at pfn feffb >> Guest uuid = 05686adf-dd94-b685-2a2b-112890bfee1d >> Time offset set 0 >> cirrus_vga_enabled >> populating video RAM at ff000000 >> mapping video RAM from ff000000 >> Register xen platform. >> Done register platform. >> xs_read(/vm/05686adf-dd94-b685-2a2b-112890bfee1d/log-throttling): read >> error >> platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw >> state. >> xs_read(/local/domain/0/device-model/2/xen_extended_power_mgmt): read >> error >> xs_read(): vncpasswd get error. >> /vm/05686adf-dd94-b685-2a2b-112890bfee1d/vncpasswd. >> medium change watch on `hdc'' (index: 1): >> /media/hitachi/slackware64-13.0-install-dvd.iso >> I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 >> I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 >> cirrus vga map change while on lfb mode >> mapping vram to e0000000 - e0400000 >> platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw >> state. >> platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro >> state. >> >> >> -- >> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical >> Engineering) >> Alma Maters: >> (1) Singapore Polytechnic >> (2) National University of Singapore >> My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com >> My Youtube videos: http://www.youtube.com/user/enmingteo >> Email: space.time.universe@gmail.com >> MSN: teoenming@hotmail.com >> Mobile Phone (SingTel): +65-9648-9798 >> Mobile Phone (Starhub Prepaid): +65-8369-2618 >> Age: 31 (as at 30 Oct 2009) >> Height: 1.78 meters >> Race: Chinese >> Dialect: Hokkien >> Street: Bedok Reservoir Road >> Country: Singapore >> >> On Sun, Nov 1, 2009 at 4:32 PM, Mr. Teo En Ming (Zhang Enming) < >> space.time.universe@gmail.com> wrote: >> >>> Hi, >>> >>> I have just installed Slackware64 13.0 Linux as a HVM guest with Xen >>> 3.5-unstable changeset 20143 pv-ops dom0 kernel 2.6.31.4. For more details, >>> please refer to the following link: >>> >>> >>> http://enmingteo.wordpress.com/2009/11/01/picture-tutorial-how-to-setup-slackware64-13-0-hvm-domu-with-xen-3-5-unstable-pv-ops-dom0-kernel-2-6-31-4-in-fedora-11-x86-64-dom0/ >>> >>> There are 83 screenshots so far at this moment. >>> >>> I have encountered a problem with the virtual network interface eth0 in >>> the Slackware virtual machine. According to Slackware, there''s no such >>> interface. >>> >>> lspci -v output shows a Realtek virtual ethernet controller by Xensource. >>> >>> The kernel model 8139too has been loaded. lsmod shows it. >>> >>> I have checked /etc/rc.d/rc.inet1.conf and eth0 is configured for DHCP. >>> Windows XP HVM virtual network interface works for DHCP. >>> >>> Then I tried to restart the networking subsystem by issuing the following >>> commands: >>> >>> # /etc/rc.d/rc.inet1 stop >>> >>> # /etc/rc.d/rc.inet1 start >>> >>> "ifconfig -a" output only shows up loopback interface lo and not eth0. >>> >>> Screenshots pertaining to the problem are here: >>> >>> http://enmingteo.files.wordpress.com/2009/11/slackware64-82.png >>> >>> http://enmingteo.files.wordpress.com/2009/11/slackware64-83.png >>> >>> Please advise. >>> >>> Thank you. >>> >>> -- >>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical >>> Engineering) >>> Alma Maters: >>> (1) Singapore Polytechnic >>> (2) National University of Singapore >>> My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com >>> My Youtube videos: http://www.youtube.com/user/enmingteo >>> Email: space.time.universe@gmail.com >>> MSN: teoenming@hotmail.com >>> Mobile Phone (SingTel): +65-9648-9798 >>> Mobile Phone (Starhub Prepaid): +65-8369-2618 >>> Age: 31 (as at 30 Oct 2009) >>> Height: 1.78 meters >>> Race: Chinese >>> Dialect: Hokkien >>> Street: Bedok Reservoir Road >>> Country: Singapore >>> >> >> >> >> >> > > > >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Possibly Parallel Threads
- Picture Tutorial: How to Setup Slackware64 13.0 HVM domU with Xen 3.5-unstable pv-ops Dom0 Kernel 2.6.31.4 in Fedora 11 x86-64 Dom0
- Using Xen Virtualization Environment for Development and Testing of Supercomputing and High Performance Computing (HPC) Cluster MPICH2 MPI-2 Applications
- Using Xen Virtualization Environment for Development and Testing of Supercomputing and High Performance Computing (HPC) Cluster MPICH2 MPI-2 Applications
- How to Backup and Restore MBR within Logical Volumes?
- Re: [virt-tools-list] Unable to complete install: ''Domain not found: xenUnifiedDomainLookupByName