search for: inet1

...ar.com> Sent: Friday, January 24, 2003 1:09 PM Subject: [VLAN] Availability problems > Hi all, > > I have a linux router using vlan patch at layer3. > All nics into the box are 3Com except 1 one them which is based on realtek > chipset. > The status are.... > > [root@fw-inet1 proc]# mii-diag eth0 > Basic registers of MII PHY #24: 3000 782d 0040 6176 05e1 0021 0000 0000. > Basic mode control register 0x3000: Auto-negotiation enabled. > You have link beat, and everything is working OK. > Your link partner is generating 10baseT link beat (no autonegotia...

...em with the virtual network interface eth0 in the Slackware virtual machine. According to Slackware, there''s no such interface. lspci -v output shows a Realtek virtual ethernet controller by Xensource. The kernel model 8139too has been loaded. lsmod shows it. I have checked /etc/rc.d/rc.inet1.conf and eth0 is configured for DHCP. Windows XP HVM virtual network interface works for DHCP. Then I tried to restart the networking subsystem by issuing the following commands: # /etc/rc.d/rc.inet1 stop # /etc/rc.d/rc.inet1 start "ifconfig -a" output only shows up loopback interface...

...em with the virtual network interface eth0 in the Slackware virtual machine. According to Slackware, there''s no such interface. lspci -v output shows a Realtek virtual ethernet controller by Xensource. The kernel model 8139too has been loaded. lsmod shows it. I have checked /etc/rc.d/rc.inet1.conf and eth0 is configured for DHCP. Windows XP HVM virtual network interface works for DHCP. Then I tried to restart the networking subsystem by issuing the following commands: # /etc/rc.d/rc.inet1 stop # /etc/rc.d/rc.inet1 start "ifconfig -a" output only shows up loopback interface...

...ction messages are appearing in the logs with <> as the sender. The sender of the original message sees the appropriate sender (postmaster@) on the rejection, but as the message makes its way through the postfix/amavis chain, I can see that the sender address is missing. Aug 20 10:55:56 inet1 amavis[21822]: [ID 702911 mail.info] (21822-05) Checking: rGDWxOHFPBdY <> -> <xxxx at toledotel.com> Aug 20 03:12:39 inet1 amavis[9724]: [ID 702911 mail.info] (09724-37) skip local delivery(3): <> -> <bad-header-quarantine> Aug 19 10:15:47 2010 (1570) xxxxxxxx-user...

Hello, I have 2 ISP uplinks (zones: inet1 and inet2), each with a fixed IP on the outside and a routed subnet (/25 and /26) on the inside. So, behind the firewall i have 2 networksegments (lan1 and lan2) with public IP-addresses. The segments are completely isolated from eachother: hosts in zone "lan1" connect only to "inet1...

Hi all !! I would to like to mark and route some kind of traffic (ie: outbound www, now by simplicity) ---inet1--------eth0------------| | | linux | --eth1------- clientes ---inet2(90.0.0.1)--------eth2-| | I have eth0 and eth1 bridged (eth2 is not bridged). I would to route www outbound clients traffic through eth2....

Hi all !! I would to like to mark and route some kind of traffic (ie: outbound www, now by simplicity) ---inet1--------eth0------------| | | linux | --eth1------- clientes ---inet2(90.0.0.1)--------eth2-| | I have eth0 and eth1 bridged (eth2 is not bridged). I would to route www outbound clients traffic through eth2....

...> factorial number of solutions. (4 sysadmins, 4 developers, 4 managers etc.. > at 5 you end up with 120 different solutions for some reason.) As much as I love CentOS (been using it since 4.x), some days I just miss the bone-headed approach of Slackware and FreeBSD. Just edit /etc/rc.d/rc.inet1.conf or /etc/rc.conf and you're done. :o) -- Microlinux - Solutions informatiques durables 7, place de l'?glise - 30730 Montpezat Site : https://www.microlinux.fr Mail : info at microlinux.fr T?l. : 04 66 63 10 32 Mob. : 06 51 80 12 12

...ic. >It is ADVANCED routing; you have a simple configuration issue, so I hope you posted more than just here. >> we''ve installed a linux machine which load balances 2 adsl lines. The >You left out a critical bit of info: WHAT DISTRO? F.E. Slackware does this in /etc/rc.d/rc.inet1 or /etc/rc/d/rc.inet1.conf Its red hat 9 >It sure as hell is not doing load balancing if it isn''t getting assigned correct IPs. I''m using a program called netsplitter from www.hostname.org seems rather crude but does the job. >> trouble is the ip address assigned to it...

...mple: # /etc/sysconfig/network-scripts/ifcfg-enp2s0 DEVICE=enp2s0 TYPE=Ethernet ONBOOT=yes BOOTPROTO=dhcp Now I wonder how I should configure things on a laptop, where I usually keep NetworkManager. On a Slackware system, it's usually just a matter of leaving a pristine /etc/rc.d/rc.inet1.conf file, and then activate /etc/rc.d/rc.networkmanager. Starting from there, when there's a wireless connection available, I can connect using the little NetworkManager applet on the desktop. And when I switch to cable, NetworkManager will prefer that connection automagically. On a default i...

Hi all I started playing with tcng to generate my tc rules, but I have some difficulty implementing my rules... The script below generates an error: # Device eth0 tc qdisc add dev eth0 ingress beginner.tc:2: don''t know how to build meter for this The script is below, I changed the real IP numbers for XXs and YYs, since it doesn''t really matter what they are. eth0 is the

I just installed pre 9 of kernel 2.2.0. I am now getting echoed to the screen of whatever virtual terminal I am in the following message: 172.16.81.99 sent an invalid ICMP error to a broadcast This is repeated for a number of IP addresses. Obviously, the problem is two fold. Firstly I need to find out what the problem is with the servers. However, I find it somewhat annoying to having this

...ripts/ifcfg-enp2s0 > DEVICE=enp2s0 > TYPE=Ethernet > ONBOOT=yes > BOOTPROTO=dhcp > > Now I wonder how I should configure things on a laptop, where I usually > keep NetworkManager. On a Slackware system, it's usually just a matter > of leaving a pristine /etc/rc.d/rc.inet1.conf file, and then activate > /etc/rc.d/rc.networkmanager. Starting from there, when there's a > wireless connection available, I can connect using the little > NetworkManager applet on the desktop. And when I switch to cable, > NetworkManager will prefer that connection automagica...

I have a script for dual internet connections that does this: ------------------------- #!/bin/bash IF1=eth1 IP1=203.219.190.106 P1=203.219.190.105 P1_NET=203.219.190.104 IF2=eth2 IP2=220.245.224.46 P2=220.245.224.45 P2_NET=220.245.224.44 IF0=eth0 P0_net=192.168.0.0 TABLE1=inet1 TABLE2=inet2 ip route add $P1_NET dev $IF1 src $IP1 table $TABLE1 ip route add default via $P1 table $TABLE1 ip route add $P2_NET dev $IF2 src $IP2 table $TABLE2 ip route add default via $P2 table $TABLE2 ip route add $P1_NET dev $IF1 src $IP1 ip route add $P2_NET dev $IF2 src $IP2 # preference...

On Tue, Feb 11, 2020 at 8:12 AM Jonathan Billings <billings at negate.org> wrote: > > On Tue, Feb 11, 2020 at 06:11:04AM +0100, Simon Matter via CentOS wrote: > > Unfortunately, instead of fixing/refactoring the whole bash networking > > script mess, another new project was started instead, called > > systemd-networkd :-) > > Actually, I'm sad that

I have problem with IP public, my Network configuration [wireless] <------> [Router] <------ > [ Linux proxy ] < ------ > [Client ] IP configuration [202.123.123.1] <------->[202.123.123.2 and 192.168.0.1] < ------ > [192.168.0.2 and 202.123.123.3] < ------ > [202.123.123.4] this configuration will use IP 202.123.123.2 on internet how to config my network

Hi *, having built Xen 4.1.0 and running my Dom0 on Slackware 13.1, I''m trying to assign different physical network interfaces to different DomU guests: vif = [ ''bridge=ethX'' ] in the DomU configuration files. My /etc/xen/scripts/network-bridge script, however, doesn''t create more than one bridge: root@cen:~# /etc/xen/scripts/network-bridge start

https://bugzilla.netfilter.org/cgi-bin/bugzilla/show_bug.cgi?id=40 laforge@netfilter.org changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED ------- Additional Comments From laforge@netfilter.org 2003-02-03 16:49 ------- We haven't seen this

...below which may be of some help for the experts to spot >any mistake(s) that i have made. thanks. > > > > >~as > -- Oliver Schulze L. oliver@samera.com.py Asuncion-Paraguay Return-Path: <Eric_Jansen@cdillc.com> Delivered-To: samba@lists.samba.org Received: from srv-nt-inet1.cdillc.com (ip-63-250-19-4.rhythms.dsl.fcc.net [63.250.19.4]) by lists.samba.org (Postfix) with ESMTP id 8A5B44398 for <samba@lists.samba.org>; Mon, 16 Jul 2001 08:17:57 -0700 (PDT) Received: from srv-nt-ex1.cdillc.com (unverified) by srv-nt-inet1.cdillc.com (Content Technologies SMTP...

...eventually ip address) other info: we're running linux here, no dns, no wins (only the new one will have it); bcast used for resolving netbios names which one would it be? cheers, dragos Return-Path: <Eric_Jansen@cdillc.com> Delivered-To: samba@lists.samba.org Received: from srv-nt-inet1.cdillc.com (ip-63-250-19-4.rhythms.dsl.fcc.net [63.250.19.4]) by lists.samba.org (Postfix) with ESMTP id 9BA0344BC for <samba@lists.samba.org>; Mon, 9 Jul 2001 06:46:51 -0700 (PDT) Received: from srv-nt-ex1.cdillc.com (unverified) by srv-nt-inet1.cdillc.com (Content Technologies SMTP...