Eric Jansen
2008-Dec-12 10:31 UTC
[Xen-users] xend nothing to flush, waiting for peth0 to negotiate
Hi,
I would like to ask concerning problems after installing xen 3.3 on Centos
5.2
I use 2.6.18.8-xen (xen3.3.1 testing - installing with mercurial). After
done with make world and make install, I did mkinitrd and placing it in
/boot
changing the grub and reboot.. succeded
I do not install libvirt and the domUs from the previous xen 3.0 (built-in
Centos 5.2) are NOT able to start :
[root@wing godwing]# /usr/sbin/xm list
Name ID Mem VCPUs State
Time(s)
Domain-0 0 3919 2 r-----
706.5
[root@wing godwing]# /usr/sbin/xm create -c /etc/xen/balthasar
Using config file "/etc/xen/balthasar".
Error: Boot loader didn''t return any data!
While rebooting : xend : nothing to flush... waiting peth0 to negotiate link
? And I find no veth0, veth1, vif[x].[x]
Following I attach the results, thus you might examine:
[root@wing godwing]# /usr/sbin/brctl show
bridge name bridge id STP enabled interfaces
eth0 8000.00173f0a7a26 no peth0
eth1 8000.0019db3895b4 no peth1
xenbr0 8000.000000000000 no
xenbr1 8000.000000000000 no
note: I don''t know why eth0 and eth1 become the bridge??!! The xenbr0
and
xenbr1 I built it with brctl addbr, but it won''t bridge to eth0. I
still can
connect to inet (LAN) with it.
[root@wing godwing]# /sbin/ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: peth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen
1000
link/ether 00:19:db:38:95:b4 brd ff:ff:ff:ff:ff:ff
3: peth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen
1000
link/ether 00:17:3f:0a:7a:26 brd ff:ff:ff:ff:ff:ff
4: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
9: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 00:17:3f:0a:7a:26 brd ff:ff:ff:ff:ff:ff
10: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 00:19:db:38:95:b4 brd ff:ff:ff:ff:ff:ff
11: xenbr0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
12: xenbr1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[root@wing godwing]# /sbin/ip route show
10.0.0.0/24 dev eth1 proto kernel scope link src 10.0.0.10
192.168.200.0/24 dev eth0 proto kernel scope link src 192.168.200.10
default via 192.168.200.1 dev eth0
[root@wing godwing]# /sbin/ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:17:3F:0A:7A:26
inet addr:192.168.200.10 Bcast:192.168.200.255
Mask:255.255.255.0
inet6 addr: fe80::217:3fff:fe0a:7a26/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3773 errors:0 dropped:0 overruns:0 frame:0
TX packets:1623 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1396281 (1.3 MiB) TX bytes:323917 (316.3 KiB)
eth1 Link encap:Ethernet HWaddr 00:19:DB:38:95:B4
inet addr:10.0.0.10 Bcast:10.255.255.255 Mask:255.255.255.0
inet6 addr: fe80::219:dbff:fe38:95b4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:41 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:11061 (10.8 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1956 errors:0 dropped:0 overruns:0 frame:0
TX packets:1956 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3253188 (3.1 MiB) TX bytes:3253188 (3.1 MiB)
peth0 Link encap:Ethernet HWaddr 00:17:3F:0A:7A:26
inet6 addr: fe80::217:3fff:fe0a:7a26/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10258 errors:0 dropped:0 overruns:0 frame:0
TX packets:7929 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6433117 (6.1 MiB) TX bytes:1339807 (1.2 MiB)
Interrupt:18 Base address:0xa000
peth1 Link encap:Ethernet HWaddr 00:19:DB:38:95:B4
inet6 addr: fe80::219:dbff:fe38:95b4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:276 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:67479 (65.8 KiB)
Interrupt:16 Base address:0x4000
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
xenbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
xenbr1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[root@wing godwing]# /etc/xen/scripts/network-bridge status
===========================================================9: eth0:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 00:17:3f:0a:7a:26 brd ff:ff:ff:ff:ff:ff
inet 192.168.200.10/24 brd 192.168.200.255 scope global eth0
inet6 fe80::217:3fff:fe0a:7a26/64 scope link
valid_lft forever preferred_lft forever
9: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 00:17:3f:0a:7a:26 brd ff:ff:ff:ff:ff:ff
inet 192.168.200.10/24 brd 192.168.200.255 scope global eth0
inet6 fe80::217:3fff:fe0a:7a26/64 scope link
valid_lft forever preferred_lft forever
bridge name bridge id STP enabled interfaces
eth0 8000.00173f0a7a26 no peth0
eth1 8000.0019db3895b4 no peth1
xenbr0 8000.000000000000 no
xenbr1 8000.000000000000 no
10.0.0.0/24 dev eth1 proto kernel scope link src 10.0.0.10
192.168.200.0/24 dev eth0 proto kernel scope link src 192.168.200.10
default via 192.168.200.1 dev eth0
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.200.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.200.1 0.0.0.0 UG 0 0 0 eth0
===========================================================
[root@wing godwing]# dmesg
Bridge firewalling registered
peth0: link up, 100Mbps, full-duplex, lpa 0x45E1
peth0: Promiscuous mode enabled.
device peth0 entered promiscuous mode
eth0: port 1(peth0) entering learning state
eth0: topology change detected, propagating
eth0: port 1(peth0) entering forwarding state
peth0: Promiscuous mode enabled.
r8169: peth1: link up
device peth1 entered promiscuous mode
eth1: port 1(peth1) entering learning state
eth1: topology change detected, propagating
eth1: port 1(peth1) entering forwarding state
suspend: event channel 23
peth0: no IPv6 routers present
eth0: no IPv6 routers present
peth1: no IPv6 routers present
eth1: no IPv6 routers present
peth0: Promiscuous mode enabled.
peth0: Promiscuous mode enabled.
eth0: port 1(peth0) entering disabled state
peth0: Promiscuous mode enabled.
device peth0 left promiscuous mode
eth0: port 1(peth0) entering disabled state
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth1: port 1(peth1) entering disabled state
device peth1 left promiscuous mode
eth1: port 1(peth1) entering disabled state
r8169: eth1: link up
eth0: no IPv6 routers present
eth1: no IPv6 routers present
peth0: link up, 100Mbps, full-duplex, lpa 0x45E1
peth0: Promiscuous mode enabled.
device peth0 entered promiscuous mode
eth0: port 1(peth0) entering learning state
eth0: topology change detected, propagating
eth0: port 1(peth0) entering forwarding state
peth0: Promiscuous mode enabled.
r8169: peth1: link up
device peth1 entered promiscuous mode
eth1: port 1(peth1) entering learning state
eth1: topology change detected, propagating
eth1: port 1(peth1) entering forwarding state
peth0: Promiscuous mode enabled.
peth0: Promiscuous mode enabled.
eth0: port 1(peth0) entering disabled state
peth0: Promiscuous mode enabled.
device peth0 left promiscuous mode
eth0: port 1(peth0) entering disabled state
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth1: port 1(peth1) entering disabled state
device peth1 left promiscuous mode
eth1: port 1(peth1) entering disabled state
r8169: eth1: link up
peth0: link up, 100Mbps, full-duplex, lpa 0x45E1
peth0: Promiscuous mode enabled.
device peth0 entered promiscuous mode
eth0: port 1(peth0) entering learning state
eth0: topology change detected, propagating
eth0: port 1(peth0) entering forwarding state
r8169: peth1: link up
peth0: Promiscuous mode enabled.
device peth1 entered promiscuous mode
eth1: port 1(peth1) entering learning state
eth1: topology change detected, propagating
eth1: port 1(peth1) entering forwarding state
peth0: no IPv6 routers present
eth0: no IPv6 routers present
peth1: no IPv6 routers present
eth1: no IPv6 routers present
How do I solve this? Would you mind giving me a hand?
Thank you in advance
Best regards.
--
Eric Jansen
CentOS Linuxer
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Maybe Matching Threads
- cannot enable sound on domU (centos5.1) and cannot change virbr0 bridge to xenbr0 bridge
- xen-3.0.3-80.el5_3.3 on RHEL 5.3 -- peth0 and xenbr0 don''t exist
- Xen network bridge questions (using network configuration tools provided by distribution)
- network issue, RHEL4, lack of peth0/peth1 device
- Xen with 2 eth interface
Wisdom of the Ancients
