Hi all,
I''m using ThinkPad T60, with xen3.1.0, windows could be installed into
a file based virtual disk. however, when I tried to use a physical
disk, I got this err msg:
HVMAssist BIOS, 1 cpu $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $
ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (0 MBytes)
ata0 slave: UnKnown device
Booting from Hard Disk...
Boot from Hard Disk failed: could not read the boot disk
FATAL: No bootable device.
anyone got the same issue before? some info attached (disk partitions,
uname, vm config, xm dmesg, xm info), thanks.
===disk partitions
/dev/sda1 (windows)
/dev/sda2 (Fedora 3 + xen 3.1.0).
=== uname -a
Linux localhost.localdomain 2.6.18-xen0 #2 SMP Fri Aug 3 23:23:00 CST
2007 i686 i686 i386 GNU/Linux
===vm config
import os, re
arch = os.uname()[4]
if re.search(''64'', arch):
arch_libdir = ''lib64''
else:
arch_libdir = ''lib''
kernel = "/usr/lib/xen/boot/hvmloader"
builder=''hvm''
memory = 256
name = "xpv"
acpi=1
apic=1
disk = [ ''phy:sda,hda,w'' ]
device_model = ''/usr/'' + arch_libdir +
''/xen/bin/qemu-dm''
boot="c"
sdl=1
vnc=0
vncpasswd=''''
stdvga=0
serial=''pty
===xm dmesg
(XEN) HVM20: HVM Loader
(XEN) HVM20: Detected Xen v3.1.0
(XEN) HVM20: Writing SMBIOS tables ...
(XEN) HVM20: Loading ROMBIOS ...
(XEN) HVM20: 9100 bytes of ROMBIOS high-memory extensions:
(XEN) HVM20: Relocating to 0xfffac00-0xfffcf8c ... done
(XEN) irq.c:210: Dom20 PCI link 0 changed 0 -> 5
(XEN) HVM20: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:210: Dom20 PCI link 1 changed 0 -> 7
(XEN) HVM20: PCI-ISA link 1 routed to IRQ7
(XEN) irq.c:210: Dom20 PCI link 2 changed 0 -> 10
(XEN) HVM20: PCI-ISA link 2 routed to IRQ10
(XEN) irq.c:210: Dom20 PCI link 3 changed 0 -> 11
(XEN) HVM20: PCI-ISA link 3 routed to IRQ11
(XEN) HVM20: pci dev 01:1 bar 20 size 00000010: 0000c001
(XEN) HVM20: pci dev 01:2 INTA->IRQ7
(XEN) HVM20: pci dev 02:0 bar 10 size 02000000: f0000008
(XEN) HVM20: pci dev 02:0 bar 14 size 00001000: f2000000
(XEN) HVM20: pci dev 03:0 bar 10 size 00000100: 0000c101
(XEN) HVM20: pci dev 03:0 bar 14 size 01000000: f3000008
(XEN) HVM20: pci dev 03:0 INTA->IRQ11
(XEN) HVM20: Creating MP tables ...
(XEN) HVM20: Loading Cirrus VGABIOS ...
(XEN) HVM20: Loading ACPI ...
(XEN) HVM20: BIOS map:
(XEN) HVM20: c0000-c8003: VGA BIOS
(XEN) HVM20: d0000-d5603: VMXAssist
(XEN) HVM20: e9000-e9135: SMBIOS tables
(XEN) HVM20: ea000-eb0df: ACPI tables
(XEN) HVM20: f0000-fffff: Main BIOS
(XEN) HVM20: Loading VMXAssist ...
(XEN) HVM20: VMX go ...
(XEN) HVM20: VMXAssist (Aug 3 2007)
(XEN) HVM20: Memory size 255 MB
(XEN) HVM20: E820 map:
(XEN) HVM20: 0000000000000000 - 000000000009FC00 (RAM)
(XEN) HVM20: 000000000009FC00 - 00000000000A0000 (Reserved)
(XEN) HVM20: 00000000000E0000 - 0000000000100000 (Reserved)
(XEN) HVM20: 0000000000100000 - 000000000FFFAC00 (RAM)
(XEN) HVM20: 000000000FFFAC00 - 0000000010000000 (Reserved)
(XEN) HVM20:
(XEN) HVM20: Start BIOS ...
(XEN) HVM20: Starting emulated 16-bit real-mode: ip=F000:FFF0
(XEN) HVM20: rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
(XEN) HVM20: Remapping master: ICW2 0x8 -> 0x20
(XEN) HVM20: Remapping slave: ICW2 0x70 -> 0x28
(XEN) HVM20: VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $
(XEN) HVM20: HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
2005/05/07 15:55:26 $
(XEN) HVM20:
(XEN) HVM20: ata0-0: PCHS=2/16/63 translation=none LCHS=2/16/63
(XEN) HVM20: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (0 MBytes)
(XEN) HVM20: ata0 slave: Unknown device
(XEN) HVM20:
(XEN) HVM20: Booting from Hard Disk...
(XEN) HVM20: int13_harddisk: function 02, error 02 !
(XEN) HVM20: Boot from Hard Disk failed: could not read the boot disk
(XEN) HVM20: FATAL: No bootable device.
(XEN) HVM20: Unknown opcode at F000:0A1B=0xF0A1B
(XEN) HVM20: Halt called from %eip 0xD389A
(XEN) HVM21: HVM Loader
(XEN) HVM21: Detected Xen v3.1.0
(XEN) HVM21: Writing SMBIOS tables ...
(XEN) HVM21: Loading ROMBIOS ...
(XEN) HVM21: 9100 bytes of ROMBIOS high-memory extensions:
(XEN) HVM21: Relocating to 0xfffac00-0xfffcf8c ... done
(XEN) irq.c:210: Dom21 PCI link 0 changed 0 -> 5
(XEN) HVM21: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:210: Dom21 PCI link 1 changed 0 -> 7
(XEN) HVM21: PCI-ISA link 1 routed to IRQ7
(XEN) irq.c:210: Dom21 PCI link 2 changed 0 -> 10
(XEN) HVM21: PCI-ISA link 2 routed to IRQ10
(XEN) irq.c:210: Dom21 PCI link 3 changed 0 -> 11
(XEN) HVM21: PCI-ISA link 3 routed to IRQ11
(XEN) HVM21: pci dev 01:1 bar 20 size 00000010: 0000c001
(XEN) HVM21: pci dev 01:2 INTA->IRQ7
(XEN) HVM21: pci dev 02:0 bar 10 size 02000000: f0000008
(XEN) HVM21: pci dev 02:0 bar 14 size 00001000: f2000000
(XEN) HVM21: pci dev 03:0 bar 10 size 00000100: 0000c101
(XEN) HVM21: pci dev 03:0 bar 14 size 01000000: f3000008
(XEN) HVM21: pci dev 03:0 INTA->IRQ11
(XEN) HVM21: Creating MP tables ...
(XEN) HVM21: Loading Cirrus VGABIOS ...
(XEN) HVM21: Loading ACPI ...
(XEN) HVM21: BIOS map:
(XEN) HVM21: c0000-c8003: VGA BIOS
(XEN) HVM21: d0000-d5603: VMXAssist
(XEN) HVM21: e9000-e9135: SMBIOS tables
(XEN) HVM21: ea000-eb0df: ACPI tables
(XEN) HVM21: f0000-fffff: Main BIOS
(XEN) HVM21: Loading VMXAssist ...
(XEN) HVM21: VMX go ...
(XEN) HVM21: VMXAssist (Aug 3 2007)
(XEN) HVM21: Memory size 255 MB
(XEN) HVM21: E820 map:
(XEN) HVM21: 0000000000000000 - 000000000009FC00 (RAM)
(XEN) HVM21: 000000000009FC00 - 00000000000A0000 (Reserved)
(XEN) HVM21: 00000000000E0000 - 0000000000100000 (Reserved)
(XEN) HVM21: 0000000000100000 - 000000000FFFAC00 (RAM)
(XEN) HVM21: 000000000FFFAC00 - 0000000010000000 (Reserved)
(XEN) HVM21:
(XEN) HVM21: Start BIOS ...
(XEN) HVM21: Starting emulated 16-bit real-mode: ip=F000:FFF0
(XEN) HVM21: rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
(XEN) HVM21: Remapping master: ICW2 0x8 -> 0x20
(XEN) HVM21: Remapping slave: ICW2 0x70 -> 0x28
(XEN) HVM21: VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $
(XEN) HVM21: HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
2005/05/07 15:55:26 $
(XEN) HVM21:
(XEN) HVM21: ata0-0: PCHS=2/16/63 translation=none LCHS=2/16/63
(XEN) HVM21: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (0 MBytes)
(XEN) HVM21: ata0 slave: Unknown device
(XEN) HVM21:
(XEN) HVM21: Booting from Hard Disk...
(XEN) HVM21: int13_harddisk: function 02, error 02 !
(XEN) HVM21: Boot from Hard Disk failed: could not read the boot disk
(XEN) HVM21: FATAL: No bootable device.
(XEN) HVM21: Unknown opcode at F000:0A1B=0xF0A1B
(XEN) HVM21: Halt called from %eip 0xD389A
===xm info
host : localhost.localdomain
release : 2.6.18-xen0
version : #2 SMP Fri Aug 3 23:23:00 CST 2007
machine : i686
nr_cpus : 2
nr_nodes : 1
sockets_per_node : 1
cores_per_socket : 2
threads_per_core : 1
cpu_mhz : 1828
hw_caps : bfe9fbff:00100000:00000000:00000140:0000c1a9
total_memory : 1022
free_memory : 268
xen_major : 3
xen_minor : 1
xen_extra : .0
xen_caps : xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xf5800000
xen_changeset : unavailable
cc_compiler : gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)
cc_compile_by : root
cc_compile_domain : localdomain
cc_compile_date : Fri Aug 3 22:33:05 CST 2007
xend_config_format : 4
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Christian Horn
2007-Aug-07 08:16 UTC
Re: [Xen-users] physical disk doesn''t work in hvm guest
On Mon, Aug 06, 2007 at 07:09:20PM +0800, Brady Chen wrote:> > ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (0 MBytes) > ata0 slave: UnKnown deviceYou could try to do the same with a pure qemu.> disk = [ ''phy:sda,hda,w'' ]You could try phy:/dev/sda,hda,w as i remember some cases when the /dev/ couldnt be left out. Otherwise i did the same thing already with an sda sata-thing, could only think that the t60 is doing something special that qemu as used in xen cant cope with. Christian _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
thank you, Christian, it works after change to "phy:/dev/sda,hda,w" On 8/7/07, Christian Horn <chorn@fluxcoil.net> wrote:> On Mon, Aug 06, 2007 at 07:09:20PM +0800, Brady Chen wrote: > > > > ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (0 MBytes) > > ata0 slave: UnKnown device > You could try to do the same with a pure qemu. > > > disk = [ ''phy:sda,hda,w'' ] > You could try phy:/dev/sda,hda,w > as i remember some cases when the /dev/ couldnt be left out. > Otherwise i did the same thing already with an sda sata-thing, > could only think that the t60 is doing something special that > qemu as used in xen cant cope with. > > > Christian >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users