search for: ata0

Hello :-) I have just bought a Pioneer 15x BluRay recorder. I saw something like below in the dmesg, I cannot access video with VLC, should I worry about that? I guess recording files can be done just as for DVD with growisofs? :-) (cd2:ata0:0:1:0): READ DVD STRUCTURE. CDB: ad 0 0 0 0 0 0 1 0 8 0 0 (cd2:ata0:0:1:0): CAM status: SCSI Status Error (cd2:ata0:0:1:0): SCSI status: Check Condition (cd2:ata0:0:1:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (cd2:ata0:0:1:0): Error 22, Unretryable error (cd2:ata0:0:1:0): READ...

...t (82810DC100 GMCH + 82801AA ICH). The docs say that there is support for UDMA66, but FreeBSD reports that the drive is being set to UDMA33. I booted in verbose mode, and here are the relevant parts from dmesg. atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 14 eb ata0: mask=03 stat0=50 stat1=10 ata0-master: ATA 01 a5 ata0: devices=09 ata0: at 0x1f0 irq 14 on atapci0 ... ad0: success setting UDMA2 on Intel chip Creating DISK ad0...

hi, latest changes in dev/ata broke this, on older -stable ... ata0-master: pio=PIO4 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire ad0: success setting PIO4 on National chip ad0: 977MB <SanDisk SDCFB-1024 Rev 0.00> at ata0-master PIO4 on latest -stable: ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire and no disk. cheers, danny

This morning I found a frozen box. On the console was this: ad0: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices .. ata0-slave: ATA identify retries exceeded done After reboot, those messages were found in /var/log/messages. I'm running FreeBSD 4.8-RC from Apr 4 10:45:49 EST 2003. Any ideas? -- Dan Langille : http://www.langille.org/

Hi all, I''m using ThinkPad T60, with xen3.1.0, windows could be installed into a file based virtual disk. however, when I tried to use a physical disk, I got this err msg: HVMAssist BIOS, 1 cpu $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (0 MBytes) ata0 slave: UnKnown device Booting from Hard Disk... Boot from Hard Disk failed: could not read the boot disk FATAL: No bootable device. anyone got the same issue before? some info attached (disk partitions, uname, vm config, xm dmesg, xm info), t...

...drive, and using XP-SP3 & BSD. XP installs/runs w/o a hitch. I then install BSD on the second half of the drive, and make an entry into the XP boot loader. Reboot into the fresh BSD install - now the trouble begins... I periodically receive the following messages: Apr 29 01:07:45 udns kernel: ata0: reiniting channel .. Apr 29 01:07:45 udns kernel: ata0: reset tp1 mask=03 ostat0=58 ostat1=50 Apr 29 01:07:45 udns kernel: ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 Apr 29 01:07:45 udns kernel: ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb Apr 29 01:07:45 udns kernel: ata0: reset tp2 stat0=50 stat...

...the hd was detected correctly). During the SLES setup i created to partitions (/ (450GB) and swap(30GB)) and installed grub in the MBR as well as in /. Unfortunatelly, after the first Boot the Systems hangs at grub after loading the HVMAssist Bios with the following message: ---------------- ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (18188 MBytes) ata0 slave: Unknown device Booting from Hard Disk... GRUB Loading stage1.5. GRUB loading, please wait... Error 2 ------------------ xm dmesg shows me: ------------------ (XEN) (GUEST:...

I upgraded from 6.2 to 6.3 p5 last night. Upon rebooting, the second disk in the mirror is missing. # atacontrol status ar0 ar0: ATA RAID1 status: DEGRADED subdisks: 0 ad0 ONLINE 1 ---- MISSING # grep ata /var/run/dmesg.boot ad0: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-master UDMA100 ad1: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-slave UDMA100 ar0: disk0 READY (master) using ad0 at ata0-master ar1: disk1 READY (mirror) using ad1 at ata0-slave I am unsure how to re-add the disk, or if this is a bug. I noticed a number of fixes for atacontrol.c beyon...

...1) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 1) Remapping slave: ICW2 0x70 -> 0x28 (XEN) (GUEST: 1) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 1) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 1) (XEN) (GUEST: 1) ata0-0: PCHS=2082/16/63 translation=lba LCHS=1024/32/63 (XEN) (GUEST: 1) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (1025 MBytes) (XEN) (GUEST: 1) ata0 slave: Unknown device (XEN) (GUEST: 1) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) (GUEST: 1) ata1 slave: Unknown device (XEN) (GUEST: 1) (X...

..._block: Allocating block in system zone - block = 8257846 and after a few minutes the hard drive corrupts itself (even superblock lost) Looking at the qemu-dm.log file I can see that no matter what size of disk I use I get: HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ ata0-0: PCHS=5952/16/63 translation=lba LCHS=744/128/63 ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (2929 MBytes) *ata0-1: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 ata0 slave: QEMU HARDDISK ATA-2 Hard-Disk (32120 MBytes) * This looks to me like the BIOS has some kind of a barrier on it. Is t...

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

...naged to install FreeBSD 4.9-STABLE on this box when setting the IDE controller in legacy mode. Everything works normal except when booting, the drives are set into UDMA33 mode: atapci0: <Intel ICH5 SATA150 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0- 0x7 irq 0 at device 31.2 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 76319MB <ST380013AS> [155061/16/63] at ata0-master UDMA33 ad1: DMA limited to UDMA33, non-ATA66 cable or device ad1: 76319MB <ST380013AS> [155061/16/63] at ata0-slave...

...y data on dvd or cd only if I set atacontrol mode acd0 pio4 Does anybody have such a problem too? is there any ways to bring this device into udma mode again? dmesg: ... atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] ... acd0: DVDR <PIONEER DVD-RW DVR-111D/1.29> at ata0-master UDMA66 ... uname -a: FreeBSD zealot.ksu.ru 7.1-STABLE FreeBSD 7.1-STABLE #1: Tue Jan 20 05:47:24 MSK 2009 root@zealot.ksu.ru:/usr/obj/usr/src/sys/ZEALOT amd64 grep -A 1 DMA /...

...0x20 | (XEN) (GUEST: 11) Remapping slave: ICW2 0x70 -> 0x28 | (XEN) (GUEST: 11) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 | vruppert Exp $ | (XEN) (GUEST: 11) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: | 2005/05/07 15:55:26 $ | (XEN) (GUEST: 11) | (XEN) (GUEST: 11) ata0-0: PCHS=16383/16/63 translation=lba | LCHS=1024/255/63 | (XEN) (GUEST: 11) ata0 master: QEMU HARDDISK ATA-2 | Hard-Disk (10241 MBytes) | (XEN) (GUEST: 11) ata0 slave: Unknown device | (XEN) (GUEST: 11) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom | (XEN) (GUEST: 11) ata1 slave: U...

...DULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev device isa device pci #device agp # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controller...

...<Trident model 8500 VGA-compatible display device> (vendor=0x1023, dev=0x8 500) at 0.0 irq 11 isab0: <PCI to ISA bridge (vendor=1106 device=8231)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8231 ATA100 controller> port 0xd000-0xd00f at device 17.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008 ata1: mask=03...

I''m trying to install OpenSuSE 10.3 as a domU on a CentOS 5.6 system running xen 3.0.3. It starts to load and then hangs: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (20480 MBytes) ata0 slave: Unknown device ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom ata1 slave: Unknown device Booting from CD-Rom... ISOLINUX 3.31 0x46f43c1e Copyright (C) 1994-2005 H. Peter Anvin Loading... In /var/log/xen/qemu-dm.14238.log I see:...

...8 | > | (XEN) (GUEST: 11) VGABios $Id: vgabios.c,v 1.61 | 2005/05/24 16:50:50 | > | vruppert Exp $ | > | (XEN) (GUEST: 11) HVMAssist BIOS, 1 cpu, $Revision: | 1.138 $ $Date: | > | 2005/05/07 15:55:26 $ | > | (XEN) (GUEST: 11) | > | (XEN) (GUEST: 11) ata0-0: PCHS=16383/16/63 translation=lba | > | LCHS=1024/255/63 | > | (XEN) (GUEST: 11) ata0 master: QEMU HARDDISK ATA-2 | > | Hard-Disk (10241 MBytes) | > | (XEN) (GUEST: 11) ata0 slave: Unknown device | > | (XEN) (GUEST: 11) ata1 master: QEMU CD-ROM ATAPI-4 | C...

...the box up and re-seated the cables. After this the machine worked fine again for maybe 12 hours but then encountered the same type of errors which start with stuff along the lines of: Sep 26 05:59:35 www /kernel: ad0: READ command timeout tag=0 serv=0 - resetting Sep 26 05:59:35 www /kernel: ata0: resetting devices .. ad0: DMA limited to UDMA33, non-ATA66 cable or device After a few of these the machine stops being able to access its drives and eventually either reboots or hangs. After searching for a bit I saw that disabling DMA access altogether might help the situation out so I have...

...CI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib1 isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03...