hi all
saw that few of you use arcmsr drivers with xen, so here is my question.
I''ve got openSuse 10.2 with Xen, got the driver from Areca in
/lib/modules/~xen/kernel/drivers/scsi/ and modified modules.dep
after that I did mkinitrd without errors, but when I boot the xen kernel it
doesn''t find/load the drivers (FATAL: Module arcmsr not found.)
any idea what could be wrong?
many thanks
-philip
#mkinitrd
Root device: /dev/sda2 (mounted on / as ext3)
Module list: arcmsr processor thermal fan jbd ext3 edd serverworks
(xennet xenblk)
Kernel image: /boot/vmlinuz-2.6.18.2-34-default
Initrd image: /boot/initrd-2.6.18.2-34-default
Shared libs: lib64/ld-2.5.so lib64/libacl.so.1.1.0
lib64/libattr.so.1.1.0 lib64/libblkid.so.1.0 lib64/libc-2.5.so
lib64/libcom_err.so.2.1 lib64/libdl-2.5.so lib64/libext2fs.so.2.4
lib64/libhistory.so.5.1 lib64/libncurses.so.5.5 lib64/libpthread-2.5.so
lib64/libreadline.so.5.1 lib64/librt-2.5.so lib64/libutil-2.5.so
lib64/libuuid.so.1.2 lib64/libvolume_id.so.0.73.0
lib64/libnss_files-2.5.so lib64/libnss_files.so.2 lib64/libgcc_s.so.1
Driver modules: ide-core ide-disk arcmsr processor thermal fan edd
serverworks
Filesystem modules: jbd mbcache ext3
Including: initramfs fsck.ext3
15342 blocks
Kernel image: /boot/vmlinuz-2.6.18.2-34-xen
Initrd image: /boot/initrd-2.6.18.2-34-xen
Shared libs: lib64/ld-2.5.so lib64/libacl.so.1.1.0
lib64/libattr.so.1.1.0 lib64/libblkid.so.1.0 lib64/libc-2.5.so
lib64/libcom_err.so.2.1 lib64/libdl-2.5.so lib64/libext2fs.so.2.4
lib64/libhistory.so.5.1 lib64/libncurses.so.5.5 lib64/libpthread-2.5.so
lib64/libreadline.so.5.1 lib64/librt-2.5.so lib64/libutil-2.5.so
lib64/libuuid.so.1.2 lib64/libvolume_id.so.0.73.0
lib64/libnss_files-2.5.so lib64/libnss_files.so.2 lib64/libgcc_s.so.1
Driver modules: ide-core ide-disk arcmsr processor thermal fan edd
serverworks
Xen domU modules: xennet xenblk
Filesystem modules: jbd mbcache ext3
Including: initramfs fsck.ext3
14991 blocks
\ \/ /___ _ __ |___ / / _ \ |___ / / / |___ |___ | || | |___
\ / _ \
\ // _ \ ''_ \ |_ \| | | | |_ \ | | | / / / /| || |_ __ __)
|
| | |
/ \ __/ | | | ___) | |_| | ___) | | | | / / / / |__ _|__/ __/|
|_| |
/_/\_\___|_| |_| |____(_)___(_)____/___|_|_|/_/ /_/ |_| |_____|
\___/
|
_____|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0.3_11774-20 (abuild@suse.de) (gcc version 4.1.2 20061115
(prerelease) (SUSE Linux)) Tue Nov 28 09:26:57 UTC 2006
Latest ChangeSet: 11774
(XEN) Command line: /boot/xen.gz console=com1 com1=57600
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bfff0000 (usable)
(XEN) 00000000bfff0000 - 00000000bfffe000 (ACPI data)
(XEN) 00000000bfffe000 - 00000000c0000000 (ACPI NVS)
(XEN) 00000000fec00000 - 00000000fec03000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 0000000100000000 - 0000000240000000 (usable)
(XEN) System RAM: 8191MB (8388156kB)
(XEN) Xen heap: 13MB (14192kB)
(XEN) found SMP MP-table at 000ff780
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v002 ACPIAM ) @
0x00000000000f7700
(XEN) ACPI: XSDT (v001 A M I OEMXSDT 0x10000605 MSFT 0x00000097) @
0x00000000bfff0100
(XEN) ACPI: FADT (v003 A M I OEMFACP 0x10000605 MSFT 0x00000097) @
0x00000000bfff0290
(XEN) ACPI: MADT (v001 A M I OEMAPIC 0x10000605 MSFT 0x00000097) @
0x00000000bfff0390
(XEN) ACPI: OEMB (v001 A M I AMI_OEM 0x10000605 MSFT 0x00000097) @
0x00000000bfffe040
(XEN) ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @
0x00000000bfff3420
(XEN) ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD 0x00000001) @
0x00000000bfff3510
(XEN) ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @
0x0000000000000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 15:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 15:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 15:1 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
(XEN) ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
(XEN) IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
(XEN) ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[32])
(XEN) IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 32-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2394.056 MHz processor.
(XEN) CPU0: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 1024K (64 bytes/line)
(XEN) CPU 0(2) -> Core 0
(XEN) AMD SVM Extension is enabled for cpu 0.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: AMD Dual-Core AMD Opteron(tm) Processor 2216 HE stepping 02
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU1: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 1024K (64 bytes/line)
(XEN) CPU 1(2) -> Core 1
(XEN) AMD: Disabling C1 Clock Ramping Node #0
(XEN) AMD: Disabling C1 Clock Ramping Node #1
(XEN) AMD SVM Extension is enabled for cpu 1.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: AMD Dual-Core AMD Opteron(tm) Processor 2216 HE stepping 02
(XEN) Booting processor 2/2 eip 90000
(XEN) Initializing CPU#2
(XEN) CPU2: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 1024K (64 bytes/line)
(XEN) CPU 2(2) -> Core 0
(XEN) AMD SVM Extension is enabled for cpu 2.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: AMD Dual-Core AMD Opteron(tm) Processor 2216 HE stepping 02
(XEN) Booting processor 3/3 eip 90000
(XEN) Initializing CPU#3
(XEN) CPU3: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 1024K (64 bytes/line)
(XEN) CPU 3(2) -> Core 1
(XEN) AMD SVM Extension is enabled for cpu 3.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: AMD Dual-Core AMD Opteron(tm) Processor 2216 HE stepping 02
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs:
(XEN) CPU#0 had 1936 usecs TSC skew, fixed it up.
(XEN) CPU#1 had 1936 usecs TSC skew, fixed it up.
(XEN) CPU#2 had -1936 usecs TSC skew, fixed it up.
(XEN) CPU#3 had -1936 usecs TSC skew, fixed it up.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 4 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000001f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000000e000000->0000000010000000 (2024418 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff805e0e5c
(XEN) Init. ramdisk: ffffffff805e1000->ffffffff80d32e00
(XEN) Phys-Mach map: ffffffff80d33000->ffffffff81cb4f10
(XEN) Start info: ffffffff81cb5000->ffffffff81cb549c
(XEN) Page tables: ffffffff81cb6000->ffffffff81cc9000
(XEN) Boot stack: ffffffff81cc9000->ffffffff81cca000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Initrd len 0x751e00, start at 0xffffffff805e1000
(XEN) Scrubbing Free
RAM:
.............................................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times
to switch
input to Xen).
kernel direct mapping tables up to 1f0be2000 @ 1cd0000-2c5f000
Bootdata ok (command line is root=/dev/sda2 console=tty0
console=ttyS0,57600 panic=30 splash=silent)
Linux version 2.6.18.2-34-xen (geeko@buildhost) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000001f0be2000 (usable)
DMI 2.3 present.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[32])
IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 32-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Built 1 zonelists. Total pages: 2034658
Kernel command line: root=/dev/sda2 console=tty0 console=ttyS0,57600
panic=30 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2394.056 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0xffff88000a8e8000 - 0xffff88000e8e8000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 7895916k/8138632k available (1876k kernel code, 233804k
reserved, 1194k data, 156k init)
Calibrating delay using timer specific routine.. 5986.94 BogoMIPS
(lpj=11973891)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 7495k freed
ACPI: Core revision 20060707
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
Initializing CPU#3
migration_cost=412
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
Error attaching device data
Error attaching device data
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.1
ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN01] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN02] (IRQs 1 3 4 5 6 7 9 *11 12 14 15)
ACPI: PCI Interrupt Link [LN03] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN04] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN05] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN06] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN07] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN08] (IRQs 1 3 4 5 6 7 *9 11 12 14 15)
ACPI: PCI Interrupt Link [LN09] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN10] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN11] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN12] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN13] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN14] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN15] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN16] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN17] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN18] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN19] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN20] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN21] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN22] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN23] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN24] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN25] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN26] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN27] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN28] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN29] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN30] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNUS] (IRQs *10)
ACPI: PCI Interrupt Link [LNSA] (IRQs 11) *0
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn''t work, try "pci=routeirq". If it
helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:06.0
PCI: Bridge: 0000:02:03.0
IO window: disabled.
MEM window: ff400000-ff4fffff
PREFETCH window: f6300000-f6afffff
PCI: Bridge: 0000:01:0d.0
IO window: disabled.
MEM window: ff400000-ff4fffff
PREFETCH window: f6300000-f6afffff
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: ff400000-ff4fffff
PREFETCH window: f6300000-f6afffff
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1173358899.616:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Boot logging started on /dev/ttyS0(/dev/console) at Thu Mar 8 13:01:40
2007
Creating device nodes with udev
Loading ide-core
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
Loading ide-disk
Loading arcmsr
FATAL: Module arcmsr not found.
Loading processor
Loading thermal
Loading fan
Loading edd
FATAL: Module edd not found.
Loading serverworks
SvrWks HT1000: IDE controller at PCI slot 0000:00:02.1
SvrWks HT1000: chipset revision 0
SvrWks HT1000: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
Loading jbd
Loading mbcache
Loading ext3
Waiting for device /dev/sda2 to appear: Timer ISR/3: Time went
backwards: delta=-676036124 delta_cpu=7938734 shadow=2126357845
off=997606577 processed=3800000000 cpu_processed=3116025142
0: 3800000000
1: 3116025142
2: 3116025142
3: 3116025142
Timer ISR/1: Time went backwards: delta=-675598284 delta_cpu=8376574
shadow=2126305127 off=998096952 processed=3800000000
cpu_processed=3116025142
0: 3800000000
1: 3116025142
2: 3116025142
3: 3120025142
Timer ISR/2: Time went backwards: delta=-675109445 delta_cpu=8865413
shadow=2126307185 off=998583889 processed=3800000000
cpu_processed=3116025142
0: 3800000000
1: 3124025142
2: 3116025142
3: 3120025142
Timer ISR/1: Time went backwards: delta=-674647932 delta_cpu=1326926
shadow=2126305127 off=999047053 processed=3800000000
cpu_processed=3124025142
0: 3800000000
1: 3124025142
2: 3124025142
3: 3120025142
Timer ISR/3: Time went backwards: delta=-674137678 delta_cpu=5837180
shadow=2126357845 off=999504570 processed=3800000000
cpu_processed=3120025142
0: 3800000000
1: 3124025142
2: 3124025142
3: 3120025142
..............................not found -- exiting to /bin/sh
___________________________________________________________
The all-new Yahoo! Mail goes wherever you go - free your email address from your
Internet provider. http://uk.docs.yahoo.com/nowyoucan.html
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users