Chu, Sam
2006-Nov-11 17:55 UTC
[Xen-users] Broadcom Corporation NetXtreme II BCM5708 bnx2 bridging
I am having the same problem. But, I cannot access to the following link for solution http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround Can someone send me the content of this link? Thanks. Pete, This may be relevant: http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround - Mike At 8/18/2006 09:40 AM Friday, Peter McEvoy wrote: Hi, I''ve run into the same issue as: http://lists.xensource.com/archives/html/xen-users/2006-07/msg00599.html In that, running the network bridge script kills networking completely, trying to ping the gateway gives me destination host unreachable. The card is: 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 11) Using the bnx2 module: filename: /lib/modules/2.6.16-2-xen-686/kernel/drivers/net/bnx2.ko version: 1.4.31 license: GPL description: Broadcom NetXtreme II BCM5706/5708 Driver author: Michael Chan <mchan@xxxxxxxxxxxx> srcversion: E70D1EF4482674DE649B19D alias: pci:v000014E4d000016ACsv*sd*bc*sc*i* alias: pci:v000014E4d000016AAsv*sd*bc*sc*i* alias: pci:v000014E4d000016AAsv0000103Csd00003102bc*sc*i* alias: pci:v000014E4d0000164Csv*sd*bc*sc*i* alias: pci:v000014E4d0000164Asv*sd*bc*sc*i* alias: pci:v000014E4d0000164Asv0000103Csd00003106bc*sc*i* alias: pci:v000014E4d0000164Asv0000103Csd00003101bc*sc*i* depends: vermagic: 2.6.16-2-xen-686 SMP 686 gcc-4.0 parm: disable_msi:Disable Message Signaled Interrupt (MSI) (int) from the debian xen kernel: Linux xen 2.6.16-2-xen-686 #1 SMP Sun Jul 16 01:42:25 UTC 2006 i686 GNU/Linux In a dell poweredge 1950 If I swap eth0 from the broadcom to a usb ethernet card using the rtl8150 driver, the bridging works immediately. I''m using the debian sid xen packages xen-utils 3.0.2+hg9697-2 I''ve put a tcpdump prepared for ethereal from the xen dom0 here: http://www.yerma.org/~pete/temp/xen/dom0 And one from the gateway here: http://www.yerma.org/~pete/temp/xen/gateway Obviously I can work around this using the usb ethernet card, but I''d prefer to use the gigabit nics that I''ve paid for. Thanks. -- Pete _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Mike Freemon
2006-Nov-11 18:34 UTC
[Xen-users] Re: Broadcom Corporation NetXtreme II BCM5708 bnx2 bridging
Sorry about that. We had to rename that machine. The new URL is: <http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround>http://mywiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround Coincidentally, the outage for the weekly backups is happening right now. The link should work again in a couple of hours. - Mike At 11/11/2006 11:55 AM Saturday, Chu, Sam wrote:>I am having the same problem. But, I cannot access to the following link >for solution ><http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround>http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround > > >Can someone send me the content of this link? > >Thanks. > >Pete, > >This may be relevant: > ><http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround>http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround > > >- Mike > >At 8/18/2006 09:40 AM Friday, Peter McEvoy wrote: >Hi, I''ve run into the same issue as: > ><http://lists.xensource.com/archives/html/xen-users/2006-07/msg00599.html>http://lists.xensource.com/archives/html/xen-users/2006-07/msg00599.html > > >In that, running the network bridge script kills networking completely, >trying to ping the gateway gives me destination host unreachable. > >The card is: > >09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 >Gigabit Ethernet (rev 11) > >Using the bnx2 module: > >filename: /lib/modules/2.6.16-2-xen-686/kernel/drivers/net/bnx2.ko >version: 1.4.31 license: GPL description: Broadcom >NetXtreme II BCM5706/5708 Driver author: Michael Chan ><mchan@xxxxxxxxxxxx> srcversion: E70D1EF4482674DE649B19D >alias: pci:v000014E4d000016ACsv*sd*bc*sc*i* >alias: pci:v000014E4d000016AAsv*sd*bc*sc*i* >alias: pci:v000014E4d000016AAsv0000103Csd00003102bc*sc*i* >alias: pci:v000014E4d0000164Csv*sd*bc*sc*i* >alias: pci:v000014E4d0000164Asv*sd*bc*sc*i* >alias: pci:v000014E4d0000164Asv0000103Csd00003106bc*sc*i* >alias: pci:v000014E4d0000164Asv0000103Csd00003101bc*sc*i* >depends: vermagic: 2.6.16-2-xen-686 SMP 686 gcc-4.0 >parm: disable_msi:Disable Message Signaled Interrupt (MSI) (int) > >from the debian xen kernel: > >Linux xen 2.6.16-2-xen-686 #1 SMP Sun Jul 16 01:42:25 UTC 2006 i686 GNU/Linux > >In a dell poweredge 1950 > >If I swap eth0 from the broadcom to a usb ethernet card using the rtl8150 >driver, the bridging works immediately. > >I''m using the debian sid xen packages xen-utils 3.0.2+hg9697-2 > >I''ve put a tcpdump prepared for ethereal from the xen dom0 here: > ><http://www.yerma.org/~pete/temp/xen/dom0>http://www.yerma.org/~pete/temp/xen/dom0 > > >And one from the gateway here: > ><http://www.yerma.org/~pete/temp/xen/gateway>http://www.yerma.org/~pete/temp/xen/gateway > > >Obviously I can work around this using the usb ethernet card, but I''d >prefer to use the gigabit nics that I''ve paid for. > >Thanks. > >-- Pete_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Reasonably Related Threads
- Broadcom Corporation NetXtreme II BCM5708 bnx2 bridging problem
- [Bridge] linux bridge performance tests and problems ebtables 100% cpu
- Problem with Broadcom Corporation NetXtreme II BCM5708 bnx2
- Dell / Broadcom NetXtreme II BCM5708
- Poor performance on bandwidth, Xen 4.0.1 kernel pvops 2.6.32.24