Displaying 20 results from an estimated 52 matches for "bcm5708".
Did you mean:
bcm5704
2008 Aug 22
3
Problem with Broadcom Corporation NetXtreme II BCM5708 bnx2
Hi,
I have a Dell PowerEdge 1950 with two NICs Broadcom NetXtreme II BCM5708
1000Base-T. I installed CentOS 5.1 and Xen 3.0.3 (RPM). One of my virtual
machines has Windows 2003 Server. In this virtual machine my NICs appears
like "Realtek RTL8139 Family PCI Fast Ethernet NIC". The problem is that
when I ping to other machines sometimes the reply time value is very...
2006 Aug 18
2
Broadcom Corporation NetXtreme II BCM5708 bnx2 bridging problem
...ssue as:
http://lists.xensource.com/archives/html/xen-users/2006-07/msg00599.html
In that, running the network bridge script kills networking completely,
trying to ping the gateway gives me destination host unreachable.
The card is:
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 11)
Using the bnx2 module:
filename: /lib/modules/2.6.16-2-xen-686/kernel/drivers/net/bnx2.ko
version: 1.4.31
license: GPL
description: Broadcom NetXtreme II BCM5706/5708 Driver
author: Michael Chan <mchan@broadcom.com>
srcversion: E7...
2006 Nov 11
1
Broadcom Corporation NetXtreme II BCM5708 bnx2 bridging
...http://lists.xensource.com/archives/html/xen-users/2006-07/msg00599.html
In that, running the network bridge script kills
networking completely,
trying to ping the gateway gives me destination host
unreachable.
The card is:
09:00.0 Ethernet controller: Broadcom Corporation
NetXtreme II BCM5708
Gigabit Ethernet (rev 11)
Using the bnx2 module:
filename:
/lib/modules/2.6.16-2-xen-686/kernel/drivers/net/bnx2.ko
version: 1.4.31
license: GPL
description: Broadcom NetXtreme II BCM5706/5708
Driver
author: Michael Chan <mchan@xxxxxxxxxxxx>
srcversi...
2013 Nov 15
3
CentOS 6 : Network Interface Naming
...uot;p1p1"
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="00:15:17:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*",
NAME="p1p2"
~]# lspci | grep Ether
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12)
0c:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (rev 06)
0c:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (...
2007 Oct 04
0
Dell / Broadcom NetXtreme II BCM5708
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Hi,
I browsed the mailinglist and saw the Wiki, disabled the management
features using FreeDOS. I''m using the 1.9.1 firmware.
...still the bridge kills the interface.
Is there a solution for the problem?
Stefan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.7 (GNU/Linux)
Comment: Using GnuPG with Mozilla -
2007 Feb 01
1
broadcom 802.3ad
Does anyone have some tips for setting up Broadcom's 802.3AD support
or just getting their driver compiled / installed?
First off, I noticed redhat claims the broadcom bcm5708 driver has
been added to the rhel4 kernel. But I don't see /proc/net/nicinfo
which broadcom claims the driver creates when it's successfully
initialized.
So, I'm trying to build the driver based on the source files
downloaded from Broadcom:
I downloaded their source rpm, installed it...
2011 May 11
4
pcifront problem in Ubuntu 10.04 domU
...omU I need to configure a network interface.
My system configuration is the next:
dom0: xen 3.4.3 with 2.6.18-238.9.1.el5xen kernel, making pci back from
a network card. All ok. This is the result from "lspci -v -s 09:00.0"
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12)
Subsystem: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 255
Memory at d2000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management v...
2008 Dec 01
4
Bonding and network cards
Hi,
I have been playing this weekend with bonding on PCI netcards and found
that all of netcards I have, but old 3com, do not support MII. So
bonding is not going to happen with them. Do you have some pci netcards
supporting MII successfully running on bonging?
Thanks,
David Hrb??
2015 Aug 31
2
Libvirt resume guest startup issues centos 7
> -----Original Message-----
> From: Gordon Messmer
> Sent: Monday, August 31, 2015 12:15 PM
>
> On 08/31/2015 03:51 AM, Jason Pyeron wrote:
> > I feel like this is an issue of libvirt starting before networking,
> > but I am a fish out of water with systemd.
>
> Are you using the "network" or "NetworkManager" service to
> configure your
2007 Oct 26
4
BROADCOM 5708 ON POWER EDGE 1955
Hello, I''ve this strange problem.
When Xen kernel start and it try to start eth devices, network doesn''t work.
It seems to be a problem with NICs firmware.
Anyone had this problem? Do you know where I can download firmware upgrade?
(on DELL''s site I''ve just searched...)
Thanks,
Carlo
No virus found in this outgoing message.
Checked by AVG Free Edition.
2008 Apr 18
7
help--dom0 network goes unpingable when xend starts
...ce.com tarballs) on
three new machines today, using a configuration setup that I''ve
used successfully many times before. However, I encountered a
new problem.
These are Dell Poweredge 1950 servers, by the way.
>From lspci
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12)
08:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12)
from lspci
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.44 (August 10,
2006)
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Bro...
2008 Jan 24
1
Dell 2950 and broadcom
Hi all
I'm trying to setup second ethernet on Dell 2950 server
but there isn't any eth1 device (in the bios are ON)
# dmesg |grep eth
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz
found at mem f8000000, IRQ 169, node addr 001c23d878bb
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz
found at mem f4000000, IRQ 169, node addr 001c23d878bd
bnx2: eth0: using MSI
bnx2: eth0 NIC Link is Up, 100 Mbps full duplex
# unam...
2008 Apr 18
1
help--dom0 network goes unpingable when xend starts (fwd)
...ce.com tarballs) on
three new machines today, using a configuration setup that I''ve
used successfully many times before. However, I encountered a
new problem.
These are Dell Poweredge 1950 servers, by the way.
>From lspci
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit
Ethernet (rev 12)
08:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit
Ethernet (rev 12)
from lspci
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.44 (August 10, 2006)
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Broa...
2010 Oct 13
5
network interface question
Hi,
I don't have ifcfg-eth1 in my /etc/sysconfig/network-scripts. But when
I do ifconfig eth1 I can see output as below. If I do ifconfig eth12 ,
I don't see anything which i am assume is normal.
eth1 Link encap:Ethernet HWaddr 00:24:E8:44:DB:CC
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0
2008 Dec 15
1
bce reporting fantom input errors?
Hi,
After changing cables,switches,ports, I came to the conclusion
that bce is reporting input errors that are not there, or creating them.
I checked this with 3 different boxes, all Dell-2950/Broadcom NetXtreme II
BCM5708 1000Base-T (B2), and one of them, while running Solaris, reported
0 errors after a week, and freebsd after a few minutes its count was > 100.
The errors appear under 7.-PRERELEASE, but not under 7.0
Anybody else seeing this?
danny
2010 Nov 15
5
Poor performance on bandwidth, Xen 4.0.1 kernel pvops 2.6.32.24
...: unavailable
cc_compiler : gcc version 4.3.1 (Debian 4.3.1-2)
cc_compile_by : waldi
cc_compile_domain : debian.org
cc_compile_date : Sat Jun 28 09:32:18 UTC 2008
xend_config_format : 4
#lspci -v
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12)
Subsystem: Dell Device 01b2
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management version...
2010 Jul 13
1
incoming works out does not (prolly a newbie question)
...ts:128 errors:0 dropped:0 overruns:0 frame:0
TX packets:1504 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:18288 (17.8 KiB) TX bytes:105343 (102.8 KiB)
[root at cloud2 network-scripts]# cat ifcfg-eth0
# Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet
DEVICE=eth0
#BOOTPROTO=static
#BROADCAST=192.168.63.255
#HWADDR=00:1A:64:12:10:D9
#IPADDR=192.168.62.22
#NETMASK=255.255.254.0
#NETWORK=192.168.62.0
ONBOOT=yes
BRIDGE=br0
[root at cloud2 network-scripts]# cat ifcfg-br0
# Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet
T...
2009 Dec 11
1
Physical Network Devices table empty
My aim is to install a standalone node on the following hardware
& run the management server in one of it's VMs.
Dell Poweredge 2950
PERC 6/i RAID0 6x: 25G / 1T / 4.4T
Dual Xeon 5470 quad-core 3.3GHz / 20G RAM
Dual onboard Broadcom NetXtreme II BCM5708 NICs
I downloaded the [1]oVirt Node 1.0.2-1.fc11.x86_64 iso from the
[2]website & boot in standalone mode per [3]instructions on the
wiki.
When entering the "4) Networking Setup" menu, there aren't any
devices present:
Physical Networking Devices (*=PXE boot interface)
Name...
2013 Jul 02
1
Centos 6.4, bnx2 in promiscuous mode does not see packets
...abit Ethernet Driver bnx2 v2.2.3 (June
27, 2012)
bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:05:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2)
PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr
00:19:b9:e2:30:ac
bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw
bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw...
2013 Oct 13
0
[Bridge] linux bridge performance tests and problems ebtables 100% cpu
...set-mark 1
--mark-target ACCEPT
i get 7-20% CPU usage on all 4 CPUs
adding another rule make this 20-40%
what I'm doing wrong?
Thanks for Your help
Current configuration:
CPU: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12)
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12)
brctl addbr br0
brctl stp br0 off
brctl addif br0 eth1
brctl addif br0 eth0
modinfo bnx2
filename: /lib/modules/3.10.13/kernel/drivers/net/ethernet/broadcom/bnx2.ko
firmwar...