Constantinos Hassapis
2006-Jul-26 14:09 UTC
[Xen-users] exec of init (/sbin/init) failed!!!
Hi, I switched to Fedora Core 5 and I now have a few problems when booting a domU virtual machine with Xen (as provided by the FC5 installation). I get the following boot trace when trying to bot a domU: Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys exec of init (/sbin/init) failed!!!: No such file or directory Kernel panic - not syncing: Attempted to kill init! I have tried both a real block device and a file-backed virtual block device for the root file-system, without success. I have also tried to change the configuration file in many ways. I have changed the file system from ro to be rw, and I have also tried to boot with and without initrd. I followed the instructions form the Xen user manual to create the root file-system (first copy the dirs that root, dev, var, etc, usr, bin, sbin, lib and then create the proc, sys, home, tmp dirs). dd if=/dev/zero of=vm1disk bs=1k seek=2048k count=1 mkfs -t ext3 vm1disk mount -o loop vm1disk /mnt cp -ax /{root,dev,var,etc,usr,bin,sbin,lib} /mnt mkdir /mnt/{proc,sys,home,tmp} umount /mnt I used the following config file for the domU: kernel = "/boot/vmlinuz-2.6.17-1.2157_FC5xenU" ramdisk = "/boot/initrd-2.6.17-1.2157_FC5xenU.img" memory = 256 disk = [ ''file:/root/vmrootfs,sda1,w'' ] name = "ExampleDomain" vif = [ '''' ] root = "/dev/sda1" extra = "4" The /etc/fstab file of the file system that the vm will use is: /dev/sda1 / ext3 defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 And I have also tried with the following alternate versions of /etc/fstab: 1) /dev/sda1 / ext3 defaults 1 1 2) /dev/sda1 / ext3 defaults 0 0 none /proc proc defaults 0 0 none /dev/pts devpts gid=2,mode=620 0 0 3) /dev/sda1 / ext3 defaults 1 1 none /proc proc defaults 0 0 none /dev/pts devpts gid=2,mode=620 0 0 Note that I have succesfully managed to boot a vm using a file system image from tty-linux5.0. So, my assumption is that the problems is related to the file system image that I use for the Fedora install. Thanks in advance for you help, --------------------------------- Yahoo! Music Unlimited - Access over 1 million songs.Try it free. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
A small observation : disk = [ ''file:/root/vmrootfs,sda1,w''] Where as in these steps u have dd if=/dev/zero of=vm1disk bs=1k seek=2048k count=1> > mkfs -t ext3 vm1disk > > mount -o loop vm1disk /mntSo shouldnt it be something like disk = [ ''file:/root/vm1disk,sda1,w''] Just my thougts .. --Dakshina --- Constantinos Hassapis <conhassapis@yahoo.com> wrote:> > Hi, > > I switched to Fedora Core 5 and I now have a few > problems when booting > a domU virtual machine with Xen (as provided by the > FC5 installation). > I get the following boot trace when trying to bot a > domU: > > Mounting proc filesystem > Mounting sysfs filesystem > Creating /dev > Creating initial device nodes > Setting up hotplug. > Creating block device nodes. > Creating root device. > Mounting root filesystem. > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > Setting up other filesystems. > Setting up new root fs > no fstab.sys, mounting internal defaults > Switching to new root and running init. > unmounting old /dev > unmounting old /proc > unmounting old /sys > exec of init (/sbin/init) failed!!!: No such file or > directory > Kernel panic - not syncing: Attempted to kill init! > > I have tried both a real block device and a > file-backed virtual block > device for the > root file-system, without success. > I have also tried to change the configuration file > in many ways. I have > changed the file system from ro to be rw, and I have > also tried to boot > with and without initrd. > > I followed the instructions form the Xen user manual > to create the root > file-system (first copy the dirs that root, dev, > var, etc, usr, bin, > sbin, lib and then create the proc, sys, home, tmp > dirs). > > dd if=/dev/zero of=vm1disk bs=1k seek=2048k count=1 > > mkfs -t ext3 vm1disk > > mount -o loop vm1disk /mnt > > cp -ax /{root,dev,var,etc,usr,bin,sbin,lib} /mnt > mkdir /mnt/{proc,sys,home,tmp} > > umount /mnt > > I used the following config file for the domU: > > kernel = "/boot/vmlinuz-2.6.17-1.2157_FC5xenU" > ramdisk = "/boot/initrd-2.6.17-1.2157_FC5xenU.img" > memory = 256 > disk = [ ''file:/root/vmrootfs,sda1,w'' ] > name = "ExampleDomain" > vif = [ '''' ] > root = "/dev/sda1" > extra = "4" > > The /etc/fstab file > of the file system that the vm will use is: > /dev/sda1 / ext3 defaults 1 1 > none /dev/pts devpts gid=5,mode=620 0 0 > none /dev/shm tmpfs defaults 0 0 > none /proc proc defaults 0 0 > none /sys sysfs defaults 0 0 > > And I have also tried with the following alternate > versions of > /etc/fstab: > 1) > /dev/sda1 / ext3 defaults 1 1 > > 2) > /dev/sda1 / ext3 defaults 0 0 > none /proc proc defaults 0 0 > none /dev/pts devpts gid=2,mode=620 0 0 > > 3) > /dev/sda1 / ext3 defaults 1 1 > none /proc proc defaults 0 0 > none /dev/pts devpts gid=2,mode=620 0 0 > > > Note that I have succesfully managed to boot a vm > using a file system > image from tty-linux5.0. So, my assumption is that > the problems is > related to the file system image that I use > for the Fedora install. > > Thanks in advance for you help, > > > --------------------------------- > Yahoo! Music Unlimited - Access over 1 million > songs.Try it free. >_______________________________________________> Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Constantinos Hassapis
2006-Jul-31 15:41 UTC
[Xen-users] exec of init (/sbin/init) failed!!!
Hi to all, I switched to Fedora Core 5 and I now have a few problems when booting a domU virtual machine with Xen (as provided by the FC5 installation). I get the following boot trace when trying to bot a domU: Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys exec of init (/sbin/init) failed!!!: No such file or directory Kernel panic - not syncing: Attempted to kill init! I have tried both a real block device and a file-backed virtual block device for the root file-system, without success. I have also tried to change the configuration file in many ways. I have changed the file system from ro to be rw, and I have also tried to boot with and without initrd. I followed the instructions form the Xen user manual to create the root file-system (first copy the dirs that root, dev, var, etc, usr, bin, sbin, lib and then create the proc, sys, home, tmp dirs). dd if=/dev/zero of=vm1disk bs=1k seek=2048k count=1 mkfs -t ext3 vm1disk mount -o loop vm1disk /mnt cp -ax /{root,dev,var,etc,usr,bin,sbin,lib} /mnt mkdir /mnt/{proc,sys,home,tmp} umount /mnt I used the following config file for the domU: kernel = "/boot/vmlinuz-2.6.17-1.2157_FC5xenU" ramdisk = "/boot/initrd-2.6.17-1.2157_FC5xenU.img" memory = 256 disk = [ ''file:/root/vm1disk,sda1,w'' ] name = "ExampleDomain" vif = [ '''' ] root = "/dev/sda1" extra = "4" The /etc/fstab file of the file system that the vm will use is: /dev/sda1 / ext3 defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 And I have also tried with the following alternate versions of /etc/fstab: 1) /dev/sda1 / ext3 defaults 1 1 2) /dev/sda1 / ext3 defaults 0 0 none /proc proc defaults 0 0 none /dev/pts devpts gid=2,mode=620 0 0 3) /dev/sda1 / ext3 defaults 1 1 none /proc proc defaults 0 0 none /dev/pts devpts gid=2,mode=620 0 0 I have allready check that the init file exits. Note that I have succesfully managed to boot a vm using a file system image from tty-linux5.0. So, my assumption is that the problems is related to the file system image that I use for the Fedora install. Thanks in advance for you help, --------------------------------- Do you Yahoo!? Get on board. You''re invited to try the new Yahoo! Mail Beta. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Maybe Matching Threads
- Installation Problem: exec of init (/sbin/init) failed!!!: No such file or directory
- xen-users@lists.xensource.com
- Setting up FSTAB
- Xen Starting DomainU:Error: Device 0 (vif) could not be connected. Hotplug scripts not working
- FC5 and Kernel panic - not syncing: Attempted to kill init!