thr3ads.net - Xen devel - [Xen-devel] Xen and ReiserFS [Jun 2005]

If this information is useful, please help other people find it:
Share via:

David F Barrera

2005-Jun-09 20:13 UTC

[Xen-devel] Xen and ReiserFS

I am unable to boot Dom0 on a machine with Reiser file systems. Reiser
support is built into the xen0 kernel. I have similar setup with ext3
file systems working just fine, so I don''t think it is a setup problem.
I have tried booting with and without and initrd file, booting with the
original Linux distro initrd file, etc, but nothing seems to work. I
recall seeing a thread about ReiserFS on this list some time ago, but I
don''t remember what the resolution was. Any ideas would be appreciated.

Here''s a snip of the log:

xen_mem: Initialising balloon driver.
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDfloppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.4)
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
Copyright (c) 1999-2004 Intel Corporation.
pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
tg3.c:v3.23 (February 15, 2005)
eth0: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:133MHz:64-
bit) 10/100/1000BaseT Ethernet 00:11:25:9d:63:18
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1]
TSOcap[0]
eth1: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:133MHz:64-
bit) 10/100/1000BaseT Ethernet 00:11:25:9d:63:19
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Blkif backend is using grant tables.
Initialising Xen netif backend
Blkif frontend is using grant tables.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ICH5: chipset revisioRed Hat/Adaptec aacraid driver (1.1.2-lk2 Jun  9
2005)
3ware Storage Controller device driver for Linux v1.26.02.000.
Fusion MPT base driver 3.01.18
Copyright (c) 1999-2004 LSI Logic Corporation
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
Fusion MPT SCSI Host driver 3.01.18
scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=10
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 0 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 1 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 2 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 3 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 4 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 5 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 6 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 8 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 9 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 10 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 11 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 12 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 13 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 14 lun 0
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptscsih: ioc0: >> Attempting host reset! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting task abort! (sc=ffff88001f178a80)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Wait IOC_READY state timeout(1500)!
mptbase: ioc0: ERROR - Doorbell INT timeout (count=999), IntStatus=8!
mptscsih: ioc0: Issue of TaskMgmt failed!
mptscsih: ioc0: WARNING - Error issuing abort task!
(sc=ffff88001f178a80)
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 15 lun 0
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Logitech Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Insert root floppy and press ENTER



-- 
Regards,

David F Barrera
Linux Technology Center
Systems and Technology Group, IBM

"The wisest men follow their own direction. "
                                                        Euripides


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Keir Fraser

2005-Jun-09 20:23 UTC

head link

Re: [Xen-devel] Xen and ReiserFS

On 9 Jun 2005, at 21:13, David F Barrera wrote:
> I am unable to boot Dom0 on a machine with Reiser file systems. Reiser
> support is built into the xen0 kernel. I have similar setup with ext3
> file systems working just fine, so I don''t think it is a setup
problem.
> I have tried booting with and without and initrd file, booting with the
> original Linux distro initrd file, etc, but nothing seems to work. I
> recall seeing a thread about ReiserFS on this list some time ago, but I
> don''t remember what the resolution was. Any ideas would be
appreciated.
The boot log hasn''t got as far as looking at the rootfs when the 
problems start. It looks like things go bad as soon as the SCSI driver 
starts to run. Does the same kernel work on the same machine if you 
point it at an ext3 system? Or do problems occur when you compile 
reiserfs into the kernel?

  -- Keir


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

David F Barrera

2005-Jun-09 20:51 UTC

head link

Re: [Xen-devel] Xen and ReiserFS

On Thu, 2005-06-09 at 21:23 +0100, Keir Fraser wrote:> On 9 Jun 2005, at 21:13, David F Barrera wrote:
> 
> > I am unable to boot Dom0 on a machine with Reiser file systems. Reiser
> > support is built into the xen0 kernel. I have similar setup with ext3
> > file systems working just fine, so I don''t think it is a
setup problem.
> > I have tried booting with and without and initrd file, booting with
the
> > original Linux distro initrd file, etc, but nothing seems to work. I
> > recall seeing a thread about ReiserFS on this list some time ago, but
I
> > don''t remember what the resolution was. Any ideas would be
appreciated.
> 
> The boot log hasn''t got as far as looking at the rootfs when the 
> problems start. It looks like things go bad as soon as the SCSI driver 
> starts to run. Does the same kernel work on the same machine if you 
> point it at an ext3 system? 
I have two identical machines with essentially the same setup, except
one has ext3 and the other has Reiser file systems. The same kernel
build works on the one that has ext3. 
> Or do problems occur when you compile 
> reiserfs into the kernel?Reiserfs is compiled into the kernel by default. I tried compiling it as
a module and making sure the initrd file contains it, but it does not
make any difference.> 
>   -- Keir
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Paul Larson

2005-Jun-09 20:58 UTC

head link

Re: [Xen-devel] Xen and ReiserFS

On Thu, 2005-06-09 at 15:51 -0500, David F Barrera
wrote:> On Thu, 2005-06-09 at 21:23 +0100, Keir Fraser wrote:
> > On 9 Jun 2005, at 21:13, David F Barrera wrote:
> > 
> > > I am unable to boot Dom0 on a machine with Reiser file systems.
Reiser
> > > support is built into the xen0 kernel. I have similar setup with
ext3
> > > file systems working just fine, so I don''t think it is a
setup problem.
> > > I have tried booting with and without and initrd file, booting
with the
> > > original Linux distro initrd file, etc, but nothing seems to
work. I
> > > recall seeing a thread about ReiserFS on this list some time ago,
but I
> > > don''t remember what the resolution was. Any ideas would
be appreciated.
> > 
> > The boot log hasn''t got as far as looking at the rootfs when
the
> > problems start. It looks like things go bad as soon as the SCSI driver
> > starts to run. Does the same kernel work on the same machine if you 
> > point it at an ext3 system? 
> 
> I have two identical machines with essentially the same setup, except
> one has ext3 and the other has Reiser file systems. The same kernel
> build works on the one that has ext3. ReiserFS is working fine on my box, with both the current bitkeeper tree
and with last nights unstable build.  From your boot log though, it
looks like it''s breaking down in the mpt scsi driver pretty badly. 
Does
the other working machine also use this driver?

-- 
Thanks,
Paul Larson
plars@linuxtestproject.org
http://www.linuxtestproject.org


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

David F Barrera

2005-Jun-09 21:03 UTC

head link

Re: [Xen-devel] Xen and ReiserFS

On Thu, 2005-06-09 at 15:58 -0500, Paul Larson wrote:> On Thu, 2005-06-09 at 15:51 -0500, David F Barrera wrote:
> > On Thu, 2005-06-09 at 21:23 +0100, Keir Fraser wrote:
> > > On 9 Jun 2005, at 21:13, David F Barrera wrote:
> > > 
> > > > I am unable to boot Dom0 on a machine with Reiser file
systems. Reiser
> > > > support is built into the xen0 kernel. I have similar setup
with ext3
> > > > file systems working just fine, so I don''t think it
is a setup problem.
> > > > I have tried booting with and without and initrd file,
booting with the
> > > > original Linux distro initrd file, etc, but nothing seems to
work. I
> > > > recall seeing a thread about ReiserFS on this list some time
ago, but I
> > > > don''t remember what the resolution was. Any ideas
would be appreciated.
> > > 
> > > The boot log hasn''t got as far as looking at the rootfs
when the
> > > problems start. It looks like things go bad as soon as the SCSI
driver
> > > starts to run. Does the same kernel work on the same machine if
you
> > > point it at an ext3 system? 
> > 
> > I have two identical machines with essentially the same setup, except
> > one has ext3 and the other has Reiser file systems. The same kernel
> > build works on the one that has ext3. 
> ReiserFS is working fine on my box, with both the current bitkeeper tree
> and with last nights unstable build.  From your boot log though, it
> looks like it''s breaking down in the mpt scsi driver pretty badly.
Does
> the other working machine also use this driver?
Yes. They are identical machines.> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Andrew Theurer

2005-Jun-09 21:18 UTC

head link

Re: [Xen-devel] Xen and ReiserFS

On Thursday 09 June 2005 16:03, David F Barrera wrote:> On Thu, 2005-06-09 at 15:58 -0500, Paul Larson wrote:
> > On Thu, 2005-06-09 at 15:51 -0500, David F Barrera wrote:
> > > On Thu, 2005-06-09 at 21:23 +0100, Keir Fraser wrote:
> > > > On 9 Jun 2005, at 21:13, David F Barrera wrote:
> > > > > I am unable to boot Dom0 on a machine with Reiser file
> > > > > systems. Reiser support is built into the xen0 kernel.
I have
> > > > > similar setup with ext3 file systems working just fine,
so I
> > > > > don''t think it is a setup problem. I have
tried booting with
> > > > > and without and initrd file, booting with the original
Linux
> > > > > distro initrd file, etc, but nothing seems to work. I
recall
> > > > > seeing a thread about ReiserFS on this list some time
ago,
> > > > > but I don''t remember what the resolution was.
Any ideas would
> > > > > be appreciated.
> > > >
> > > > The boot log hasn''t got as far as looking at the
rootfs when
> > > > the problems start. It looks like things go bad as soon as
the
> > > > SCSI driver starts to run. Does the same kernel work on the
> > > > same machine if you point it at an ext3 system?
> > >
> > > I have two identical machines with essentially the same setup,
> > > except one has ext3 and the other has Reiser file systems. The
> > > same kernel build works on the one that has ext3.
> >
> > ReiserFS is working fine on my box, with both the current bitkeeper
> > tree and with last nights unstable build.  From your boot log
> > though, it looks like it''s breaking down in the mpt scsi
driver
> > pretty badly.  Does the other working machine also use this driver?
>
> Yes. They are identical machines.
Have you tried ext3 on the system which shows problems with reiserfs?  
If these are hot swap disks, can you swap the disks witht he two 
systems ans see what happens?  It really looks like the "broken" one 
has a scsi HW related issue.

-Andrew

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

David F Barrera

2005-Jun-10 13:04 UTC

head link

Re: [Xen-devel] Xen and ReiserFS

On Thu, 2005-06-09 at 16:18 -0500, Andrew Theurer wrote:> On Thursday 09 June 2005 16:03, David F Barrera wrote:
> > On Thu, 2005-06-09 at 15:58 -0500, Paul Larson wrote:
> > > On Thu, 2005-06-09 at 15:51 -0500, David F Barrera wrote:
> > > > On Thu, 2005-06-09 at 21:23 +0100, Keir Fraser wrote:
> > > > > On 9 Jun 2005, at 21:13, David F Barrera wrote:
> > > > > > I am unable to boot Dom0 on a machine with Reiser
file
> > > > > > systems. Reiser support is built into the xen0
kernel. I have
> > > > > > similar setup with ext3 file systems working just
fine, so I
> > > > > > don''t think it is a setup problem. I have
tried booting with
> > > > > > and without and initrd file, booting with the
original Linux
> > > > > > distro initrd file, etc, but nothing seems to
work. I recall
> > > > > > seeing a thread about ReiserFS on this list some
time ago,
> > > > > > but I don''t remember what the resolution
was. Any ideas would
> > > > > > be appreciated.
> > > > >
> > > > > The boot log hasn''t got as far as looking at
the rootfs when
> > > > > the problems start. It looks like things go bad as soon
as the
> > > > > SCSI driver starts to run. Does the same kernel work on
the
> > > > > same machine if you point it at an ext3 system?
> > > >
> > > > I have two identical machines with essentially the same
setup,
> > > > except one has ext3 and the other has Reiser file systems.
The
> > > > same kernel build works on the one that has ext3.
> > >
> > > ReiserFS is working fine on my box, with both the current
bitkeeper
> > > tree and with last nights unstable build.  From your boot log
> > > though, it looks like it''s breaking down in the mpt scsi
driver
> > > pretty badly.  Does the other working machine also use this
driver?
> >
> > Yes. They are identical machines.
> 
> Have you tried ext3 on the system which shows problems with reiserfs?  
> If these are hot swap disks, can you swap the disks witht he two 
> systems ans see what happens?  It really looks like the "broken"
one
> has a scsi HW related issue.I read what you are saying, but the machine works fine with the distro
kernel. So, I don''t believe it is a HW related
issue.> 
> -Andrew
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

David F Barrera

2005-Jun-10 16:14 UTC

head link

Re: [Xen-devel] Xen and ReiserFS

OK. Mea culpa. I found out the problem was I had ''acpi=off'' as
a kernel
parameters in my grub entry for Xen, due to an earlier problem where it
was suggested to try it. Thanks for the responses.

On Fri, 2005-06-10 at 08:04 -0500, David F Barrera
wrote:> On Thu, 2005-06-09 at 16:18 -0500, Andrew Theurer wrote:
> > On Thursday 09 June 2005 16:03, David F Barrera wrote:
> > > On Thu, 2005-06-09 at 15:58 -0500, Paul Larson wrote:
> > > > On Thu, 2005-06-09 at 15:51 -0500, David F Barrera wrote:
> > > > > On Thu, 2005-06-09 at 21:23 +0100, Keir Fraser wrote:
> > > > > > On 9 Jun 2005, at 21:13, David F Barrera wrote:
> > > > > > > I am unable to boot Dom0 on a machine with
Reiser file
> > > > > > > systems. Reiser support is built into the
xen0 kernel. I have
> > > > > > > similar setup with ext3 file systems working
just fine, so I
> > > > > > > don''t think it is a setup problem. I
have tried booting with
> > > > > > > and without and initrd file, booting with the
original Linux
> > > > > > > distro initrd file, etc, but nothing seems to
work. I recall
> > > > > > > seeing a thread about ReiserFS on this list
some time ago,
> > > > > > > but I don''t remember what the
resolution was. Any ideas would
> > > > > > > be appreciated.
> > > > > >
> > > > > > The boot log hasn''t got as far as looking
at the rootfs when
> > > > > > the problems start. It looks like things go bad as
soon as the
> > > > > > SCSI driver starts to run. Does the same kernel
work on the
> > > > > > same machine if you point it at an ext3 system?
> > > > >
> > > > > I have two identical machines with essentially the same
setup,
> > > > > except one has ext3 and the other has Reiser file
systems. The
> > > > > same kernel build works on the one that has ext3.
> > > >
> > > > ReiserFS is working fine on my box, with both the current
bitkeeper
> > > > tree and with last nights unstable build.  From your boot
log
> > > > though, it looks like it''s breaking down in the mpt
scsi driver
> > > > pretty badly.  Does the other working machine also use this
driver?
> > >
> > > Yes. They are identical machines.
> > 
> > Have you tried ext3 on the system which shows problems with reiserfs?
> > If these are hot swap disks, can you swap the disks witht he two 
> > systems ans see what happens?  It really looks like the
"broken" one
> > has a scsi HW related issue.
> I read what you are saying, but the machine works fine with the distro
> kernel. So, I don''t believe it is a HW related issue.
> > 
> > -Andrew
> > 
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
> -- 
Regards,

David F Barrera
Linux Technology Center
Systems and Technology Group, IBM

"The wisest men follow their own direction. "
                                                        Euripides


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Kurt Garloff

2005-Jun-10 22:57 UTC

head link

Re: [Xen-devel] Xen and ReiserFS

Hi David,

On Thu, Jun 09, 2005 at 03:13:05PM -0500, David F Barrera
wrote:> I am unable to boot Dom0 on a machine with Reiser file systems. Reiser
> support is built into the xen0 kernel. I have similar setup with ext3
> file systems working just fine, so I don''t think it is a setup
problem.
> I have tried booting with and without and initrd file, booting with the
> original Linux distro initrd file, etc, but nothing seems to work. I
> recall seeing a thread about ReiserFS on this list some time ago, but I
> don''t remember what the resolution was. Any ideas would be
appreciated.
We used reiser in testing successfully.

Strange!
-- 
Kurt Garloff, Director SUSE Labs, Novell Inc.


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Possibly Parallel Threads

Search for more seemingly similar threads

Xen devel - Jun 2005 - Xen and ReiserFS

[Xen-devel] Xen and ReiserFS

Re: [Xen-devel] Xen and ReiserFS

Re: [Xen-devel] Xen and ReiserFS

Re: [Xen-devel] Xen and ReiserFS

Re: [Xen-devel] Xen and ReiserFS

Re: [Xen-devel] Xen and ReiserFS

Re: [Xen-devel] Xen and ReiserFS

Re: [Xen-devel] Xen and ReiserFS

Re: [Xen-devel] Xen and ReiserFS

Possibly Parallel Threads