search for: ioc0

...de with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ICH5: chipset revisioRed Hat/Adaptec aacraid driver (1.1.2-lk2 Jun 9 2005) 3ware Storage Controller device driver for Linux v1.26.02.000. Fusion MPT base driver 3.01.18 Copyright (c) 1999-2004 LSI Logic Corporation mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery Fusion MPT SCSI Host driver 3.01.18 scsi0 : ioc...

Hi List, Any ideas what is wrong with controller? It is running latest 5.x series of centos and driver spills out following warnings at random times: mptbase: ioc0: WARNING - IOC is in FAULT state (1600h)!!! mptbase: ioc0: WARNING - Issuing HardReset from mpt_fault_reset_work!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - IOC is in FAULT state!!! mptbase: ioc0: WARNING - FAULT code = 1600h mptbase: ioc0: Recovered from IOC FAULT mptb...

Every few hours we get the following in /var/log/messages: Oct 19 20:56:20 wltracp1a kernel: mptscsi: ioc0: bus reset: SUCCESS (sc=0000010190c56080) Oct 19 20:56:20 wltracp1a kernel: mptscsi: ioc0: attempting task abort! (sc=0000010190c56080) Oct 19 20:56:20 wltracp1a kernel: scsi4 : destination target 2, lun 0 Oct 19 20:56:20 wltracp1a kernel: command = Test Unit Ready 00 00 00 00 00 Oct 19 20:...

...490555] SCSI subsystem initialized [ 4.502222] Fusion MPT base driver 3.04.06 [ 4.511363] Copyright (c) 1999-2007 LSI Corporation [ 4.526520] Fusion MPT SAS Host driver 3.04.06 [ 4.536466] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.551871] mptbase: ioc0: Initiating bringup [ 5.265020] ioc0: LSISAS1064E B2: Capabilities={Initiator} [ 5.277276] no ownder 5.277276] no ownder [ 5.282441] mptbase: ioc0: PCI-MSI enabled [ 24.397417] mptbase: ioc0: Initiating recovery [ 54.917063] mptbase: ioc0: Initiating recovery [ 103.067093] scsi0 :...

...490555] SCSI subsystem initialized [ 4.502222] Fusion MPT base driver 3.04.06 [ 4.511363] Copyright (c) 1999-2007 LSI Corporation [ 4.526520] Fusion MPT SAS Host driver 3.04.06 [ 4.536466] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.551871] mptbase: ioc0: Initiating bringup [ 5.265020] ioc0: LSISAS1064E B2: Capabilities={Initiator} [ 5.277276] no ownder 5.277276] no ownder [ 5.282441] mptbase: ioc0: PCI-MSI enabled [ 24.397417] mptbase: ioc0: Initiating recovery [ 54.917063] mptbase: ioc0: Initiating recovery [ 103.067093] scsi0 :...

...0, Seagate SATA drive, non-raid. > > I have this server which has been dying randomly, with no logs. Here is a console picture. http://i.imgur.com/ZYHlB82.jpg > > I had a tail -f over ssh for a week, when this just happened. > > Feb 8 00:10:21 thirteen-230 kernel: mptscsih: ioc0: > attempting task abort! (sc=ffff880057a0a080) > Feb 8 00:10:21 thirteen-230 kernel: sd 4:0:0:0: [sda] CDB: > Write(10): 2a 00 1a 17 a1 6f 00 00 01 00 > Feb 8 00:10:51 thirteen-230 kernel: mptscsih: ioc0: WARNING > - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x240000...

...stall CentOS 4.0 on my X4100, I am ready to switch to it. TIA Sungsoo Kim ------------------- SCSI subsystem initialized Fusion MPT base driver 3.02.18 Copyright (c) 1999-2005 LSI Logic Corporation ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 28 (level, low) -> IRQ 209 mptbase: Initiating ioc0 bringup ioc0: SAS1064: Capabilities={Initiator} Fusion MPT SCSI Host driver 3.02.18 scsi0 : ioc0: LSISAS1064, FwRev=01040000h, Ports=1, MaxQ=203, IRQ=209 Vendor: FUJITSU Model: MAV2073RCSUN72G Rev: 0301 Type: Direct-Access ANSI SCSI revision: 04 SCSI device sda: 14337...

...--- > > From: Jason Pyeron > > Sent: Sunday, February 08, 2015 0:00 > > > > > -----Original Message----- > > > From: Jason Pyeron > > > Sent: Saturday, February 07, 2015 22:54 > > > > > > Feb 8 00:10:21 thirteen-230 kernel: mptscsih: ioc0: attempting task abort! (sc=ffff880057a0a080) > > > Feb 8 00:10:21 thirteen-230 kernel: sd 4:0:0:0: [sda] CDB: Write(10): 2a 00 1a 17 a1 6f 00 00 01 00 > > > Feb 8 00:10:51 thirteen-230 kernel: mptscsih: ioc0: WARNING - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x2400...

I think the panic is the consequence of drive write failure. So the actual problem is before the panic call trace. I'd post the entire dmesg somewhere wrap safe (either you mail agent or the forum is hard wrapping and is a pain to read). What do you get for smartctl -x <dev> In the meantime check or replace cables, usually it's the connectors that are faulty not the cable itself.

On Tue, Feb 17, 2015 at 7:54 AM, Jason Pyeron <jpyeron at pdinc.us> wrote: >> I'd post the entire dmesg somewhere > > http://client.pdinc.us/panic-341e97c30b5a4cb774942bae32d3f163.log At least part of the problem happens before this log starts. >> What do you get for >> smartctl -x <dev> > >

On Tue, Feb 17, 2015 at 7:34 PM, Jason Pyeron <jpyeron at pdinc.us> wrote: >> -----Original Message----- >> From: Chris Murphy >> Sent: Tuesday, February 17, 2015 20:48 >> >> On Tue, Feb 17, 2015 at 7:54 AM, Jason Pyeron wrote: >> >> I'd post the entire dmesg somewhere >> > >> >

...is happening on Centos 6 x86_64, 2.6.32-504.3.3.el6.x86_64 not Centos 5 Dell PowerEdge 2970, Seagate SATA drive, non-raid. I have this server which has been dying randomly, with no logs. I had a tail -f over ssh for a week, when this just happened. Feb 8 00:10:21 thirteen-230 kernel: mptscsih: ioc0: attempting task abort! (sc=ffff880057a0a080) Feb 8 00:10:21 thirteen-230 kernel: sd 4:0:0:0: [sda] CDB: Write(10): 2a 00 1a 17 a1 6f 00 00 01 00 Feb 8 00:10:51 thirteen-230 kernel: mptscsih: ioc0: WARNING - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x24000000 Feb 8 00:10:51 thirteen-...

..."struct_module" found: kernel tainted. SCSI subsystem initialized Loading sd_mod.ko module Loading mptbase.ko module Fusion MPT base driver 3.01.20 Copyright (c) 1999-2004 LSI Logic Corporation ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 18 (level, low) -> IRQ 18 mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator,Target} ACPI: PCI Interrupt 0000:04:05.1[B] -> GSI 19 (level, low) -> IRQ 19 mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator,Target} Loading mptscsih.ko module Fusion MPT SCSI Host driver 3.01.20 scsi0 : ioc0: LSI53C1030,...

...ocksource tsc unstable (delta = -77309385171 ns). Enable clocksource failover by adding clocksource_failover kernel parameter. > > > > > I had a tail -f over ssh for a week, when this just happened. > > > > Feb 8 00:10:21 thirteen-230 kernel: mptscsih: ioc0: > > attempting task abort! (sc=ffff880057a0a080) > > Feb 8 00:10:21 thirteen-230 kernel: sd 4:0:0:0: [sda] CDB: > > Write(10): 2a 00 1a 17 a1 6f 00 00 01 00 > > Feb 8 00:10:51 thirteen-230 kernel: mptscsih: ioc0: WARNING > > - Issuing Reset from mptscsih_IssueTas...

I have the exact same issue on several Sunfire v20z (hardware LSI RAID controler). Under high IO load, the raid controler starts complaining with disk errors : [163442.483878] mptbase: ioc0: LogInfo(0x11070000): F/W: DMA Error [163445.172333] sd 2:0:0:0: [sda] Unhandled error code [163445.172338] sd 2:0:0:0: [sda] Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK [163445.172345] sd 2:0:0:0: [sda] CDB: Write(10): 2a 00 00 ba ee 4d 00 04 00 00 [163445.172365] end_request: I/O error,...

> -----Original Message----- > From: Chris Murphy > Sent: Tuesday, February 17, 2015 23:38 > > On Tue, Feb 17, 2015 at 7:34 PM, Jason Pyeron wrote: > >> -----Original Message----- > >> From: Chris Murphy > >> Sent: Tuesday, February 17, 2015 20:48 > >> > >> On Tue, Feb 17, 2015 at 7:54 AM, Jason Pyeron wrote: > >> >>

I am currently testing an Overland Tape storage unit with a LTO-3 drive on CentOS 4.4. After a random amount of time but usually when we have backed up about 0.5-1TB we get scsi errors which cause the backup to fail. I have rebuilt the box with Solaris 10 x86 and Windoze to prove the hardware and have successfully backed up over 3TB on each OS without error. Can anyone offer advice on how to find

...label firstpool devid 12 transid 31965 /dev/sdp [92728.516669] device label firstpool devid 13 transid 31965 /dev/sdq [92728.516695] device label firstpool devid 14 transid 31965 /dev/sdr [92728.551786] device label firstpool devid 3 transid 31490 /dev/sdg [92750.177157] end_device-4:0:19: mptsas: ioc0: removing sata device: fw_channel 0, fw_id 12, phy 12,sas_addr 0x50030480008a364c [92750.177163] phy-4:0:20: mptsas: ioc0: delete phy 12, phy-obj (0xffff8803ab81d400) [92750.177170] port-4:0:19: mptsas: ioc0: delete port 19, sas_addr (0x50030480008a364c) [92750.178149] sd 4:0:18:0: [sdg] Synchron...

> -----Original Message----- > From: Chris Murphy > Sent: Tuesday, February 17, 2015 20:48 > > On Tue, Feb 17, 2015 at 7:54 AM, Jason Pyeron wrote: > >> I'd post the entire dmesg somewhere > > > > http://client.pdinc.us/panic-341e97c30b5a4cb774942bae32d3f163.log > > At least part of the problem happens before this log starts. Feb 15 23:41:19

...0 0 0 0 XT-PIC cascade 4: 399 80 58 26 XT-PIC serial 5: 138 19 4 4 XT-PIC ehci_hcd:usb2 7: 16203243 179851060 180334480 180522274 XT-PIC ioc0, eth1 8: 1 0 0 0 XT-PIC rtc 9: 0 0 0 0 XT-PIC acpi 11: 764 64 17 21 XT-PIC ohci_hcd:usb1 12: 2 2 0 0 XT-PIC...