similar to: Xen and ReiserFS

Hello all, I?m at my wits end trying to resolve this. We are running centos 4.5 on Intel hardware. Dual SCSI disk drives mirrored on an LSI Logic controller. Every once in a while and not always on the same server and not only on the local SCSI Drives. System A ? Dual internal drives on /dev/sda System B ? Dual internal drives on /dev/sdc with a DAS on /dev/sda. Each of these

> -----Original Message----- > From: Jason Pyeron > Sent: Saturday, February 07, 2015 22:54 > > NOTE: this is happening on Centos 6 x86_64, > 2.6.32-504.3.3.el6.x86_64 not Centos 5 > > Dell PowerEdge 2970, Seagate SATA drive, non-raid. > > I have this server which has been dying randomly, with no logs. Here is a console picture. http://i.imgur.com/ZYHlB82.jpg

> -----Original Message----- > From: Chris Murphy > Sent: Tuesday, February 17, 2015 3:58 > > I think the panic is the consequence of drive write failure. > So the actual > problem is before the panic call trace. Most of the time it panics without any warning, but once there was: > > -----Original Message----- > > From: Jason Pyeron > > Sent: Sunday,

I''m testing xen 3.4 on my servers, and I''m having problem with controller driver, he can''t load itself properly so the system isn''t booting. The system is debian 5.0 with kernel 2.6.26-2-xen from distribution and 2.6.29-5 compiled, the problem occure with both kernels ouput from debian 5.0/kernel 2.6.26-2-xen/xen-3.4.1-rc2 4.306723] PNP: No PS/2

> -----Original Message----- > From: Jason Pyeron > Sent: Sunday, February 08, 2015 0:00 > > > -----Original Message----- > > From: Jason Pyeron > > Sent: Saturday, February 07, 2015 22:54 > > > > NOTE: this is happening on Centos 6 x86_64, > > 2.6.32-504.3.3.el6.x86_64 not Centos 5 > > > > Dell PowerEdge 2970, Seagate SATA drive,

Basically the issue comes down to my Volume Groups not being found by this initrd, causing good ole kernel panic. initrd-2.6.12.6-xen3_12.1_rhel4.1.img [root@xen01 lvm]# uname -a Linux xen01.inside.***.com 2.6.9-22.0.2.ELsmp #1 SMP Thu Jan 5 17:13:01 EST 2006 i686 i686 i386 GNU/Linux [root@xen01 lvm]# cat /etc/redhat-release Red Hat Enterprise Linux ES release 4 (Nahant Update 2) Everything

NOTE: this is happening on Centos 6 x86_64, 2.6.32-504.3.3.el6.x86_64 not Centos 5 Dell PowerEdge 2970, Seagate SATA drive, non-raid. I have this server which has been dying randomly, with no logs. I had a tail -f over ssh for a week, when this just happened. Feb 8 00:10:21 thirteen-230 kernel: mptscsih: ioc0: attempting task abort! (sc=ffff880057a0a080) Feb 8 00:10:21 thirteen-230 kernel:

Hi List, Any ideas what is wrong with controller? It is running latest 5.x series of centos and driver spills out following warnings at random times: mptbase: ioc0: WARNING - IOC is in FAULT state (1600h)!!! mptbase: ioc0: WARNING - Issuing HardReset from mpt_fault_reset_work!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - IOC is in FAULT state!!! mptbase: ioc0: WARNING -

Hi, I have installed xen-3.4.x on debian 5.0.1 with debian xen kernel 2.6.26-2 and I had a problem with boot and below I past dmesg output: 4.306723] PNP: No PS/2 controller found. Probing ports directly. [ 4.323790] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.334853] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.346424] mice: PS/2 mouse device common for all mice [ 4.361272]

Every few hours we get the following in /var/log/messages: Oct 19 20:56:20 wltracp1a kernel: mptscsi: ioc0: bus reset: SUCCESS (sc=0000010190c56080) Oct 19 20:56:20 wltracp1a kernel: mptscsi: ioc0: attempting task abort! (sc=0000010190c56080) Oct 19 20:56:20 wltracp1a kernel: scsi4 : destination target 2, lun 0 Oct 19 20:56:20 wltracp1a kernel: command = Test Unit Ready 00 00 00 00 00 Oct

I have an IBM System x 3250 that successfully boots using the standard kernel (2.6.18-8.1.10.el5) but fails to boot with the xen kernel. The kernel appears to fail when it attempts to initialize the driver for the onboard SAS controller (LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS). Can anyone provide any advice? Here's the relevant info. Please let me know if any other

All, I am running xen3.0.2 on CentOS4.2, and get this error when trying to boot Xen kernel(domain0) ...... Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempting to kill init! >Then system reboot.In grub.conf,I have changed

I have the exact same issue on several Sunfire v20z (hardware LSI RAID controler). Under high IO load, the raid controler starts complaining with disk errors : [163442.483878] mptbase: ioc0: LogInfo(0x11070000): F/W: DMA Error [163445.172333] sd 2:0:0:0: [sda] Unhandled error code [163445.172338] sd 2:0:0:0: [sda] Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK [163445.172345] sd 2:0:0:0:

Alle, I am trying to install CentOS 5 on a Dual Xeon 5160 FJ RX200 S3. The RAID hardware is an internal LSI MPT 1068 SAS/RAID controller (LSI 1068SASIME-2300). I have downloaded the drivers (mptsas, mptscsih and mptbase) and created the required floppy. When I run linux dd after booting from either the DVD or Disk 1 of the CentOS distro, it says it loads mptsas, mptbase and mptscsih and

I''ve compiled xen without any problems. but now i have to create an initrd file. When i use the command mkinitrd (without any options) the i''ve got some errors: # mkinitrd Root device: /dev/sda3 (mounted on / as reiserfs) Module list: ata_piix mptbase mptscsih qla2300 reiserfs Kernel image: /boot/vmlinuz-2.6.11.12-xen0 Initrd image: /boot/initrd-2.6.11.12-xen0 Shared

Hi, all! I want to change current RHEL 4.0 ES into CentOS 4.2 on Sun X4100 server. The server has SAS SCSI based two 2.5" hard disks. I could only install RHEL 4.0 Update 1 because the server is equipped with RHEL 4.0 Update 1's device driver only. I've included below the boot process messages concerned with SCSI controller. If it's possible for me to install CentOS 4.0 on my

Hi all, i've installed AMP and Asterisk following the INSTALL file and i have a problem with the TDM04B with 4 FXO: [root@srvoip ~]# ztcfg -vv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Slaves: 03) Channel 04: FXO Kewlstart (Default)

zaprtc 'load' is failing on my machine (the make was fine, same output as other posts to this list) [xxx@xxx zaptelrtc]# make load sync modprobe zaptel insmod ./zaprtc.o ./zaprtc.o: init_module: Input/output error Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or

Recipe for useing xen/ia64 with pv_ops domU. Signed-off-by: Akio Takebe <takebe_akio at jp.fujitsu.com> Signed-off-by: Isaku Yamahata <yamahata at valinux.co.jp> Cc: Randy Dunlap <randy.dunlap at oracle.com> --- Documentation/ia64/xen.txt | 183 ++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 183 insertions(+), 0 deletions(-) create mode 100644

Recipe for useing xen/ia64 with pv_ops domU. Signed-off-by: Akio Takebe <takebe_akio at jp.fujitsu.com> Signed-off-by: Isaku Yamahata <yamahata at valinux.co.jp> Cc: Randy Dunlap <randy.dunlap at oracle.com> --- Documentation/ia64/xen.txt | 183 ++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 183 insertions(+), 0 deletions(-) create mode 100644