On Wed, Nov 24, 2010 at 18:11, Cockburn, Beau
<beau.cockburn at st-clair.net> wrote:> Hi Gene
1) If you join the list, continuing this conversation would be easier
in that others will more readily see your replies.
2) Could you provide version details? Are you using the pre-compiled
pxelinux.0 and chain.c32 from the Syslinux 4.03 package? If not, this
is probably my first suggestion. Of course, if you have any other
modules from Syslinux, they should come from the same package/package
set.
> Yes that's right "Append HD0" failed. I'm not sure why
but it keeps coming back to PXE.
This is indeed interesting. Using "chain.c32 hd0 0" works while
"chain.c32 hd0" does not. (These are just the one-line equivalent of
the LABEL you're probably using)
"keeps coming back to PXE."? Do you mean that using "chain.c32
hd0"
just restarts the PXE boot? If so, the BIOS is trying to be smart and
retry the boot rather than fail.
I have access to E6410s at work that I can try to check Monday.
> So I used append hd0 0 and it worked.
>
> Beau
>
> ****************************
> Sent from Beast's BlackBerry BOLD.
> Have a nice BOLD day!
> Beau Cockburn,
> Computer Technician, A+
> SCCDSB - Ursuline College
> ****************************
>
> ----- Original Message -----
> From: Geert Stappers <stappers at stappers.nl>
> To: Gene Cumm <gene.cumm at gmail.com>
> Cc: Cockburn, Beau
> Sent: Wed Nov 24 18:06:06 2010
> Subject: Re: [syslinux] Useful Info about Dell latitude E5510
>
> Op 20101124 om 16:53 schreef Gene Cumm:
>> On Wed, Nov 24, 2010 at 11:19, Cockburn, Beau wrote:
>> > Hi H. Peter Anvin,
>> >
>> > I wanted to thank you for sharing information about PXE, I have
used
>> > this a lot and I wanted to share something that may be important
for you
>> > and your readers.
>>
>> I think feedback, especially when a feature is new or there is a
>> suspected bug, is always appriciated.
>>
>> > I have many different Dell model, they all worked well with PXE
booting
>> > however not for E5510. I noticed that using "LocalBoot -1 or
0" doesn't
>> > work well. What I did use for Latitude E5510 (Bios A06) was same
to
>> > "LOCALBOOT on IBM x3850 X5"
>> >
>> > COM32 Chain.c32
>> > Append hd0 0
>> >
>> > Not "Append hd0"
>>
>> Does this mean you tried just "APPEND hd0" and it failed or
you never
>> tested this scenario? ?The two are supposed to be equivalent. ?If you
>> tested "APPEND hd0" and it didn't work, this is probably
a bug.
>>
>> > It works and boots to local disk without any problems.
>>
>> That's good to know.