search for: hd0

I have been trying to find the information by searching through the archives and google, so I am sorry if this question has been asked before I just have not been able to find an answer. I have a syslinux boot floppy which loads to the boot prompt, I wish to load a .gz image which is on my hd0 0 by using memdisk as the kernel. I have tried to kernel memdisk append root=/dev/hd0 0 (also just using /hd0) initrd=mini.gz and kernel memdisk initrd=/dev/hd0 0/mini.gz and a multitude of other things to try to accomplish this. But each time it responds "mini.gz cannot be found. hd0 0...

...r boot... it just stops at the grub prompt (a second VM functions just fine). I have no idea why this problem occurred and have been unable to fix it. On google I have found several suggestions as to how to repair grub but so far none have worked. What I have found so far is this: grub> ls (hd0) (hd0,msdos2) (hd0,msdos1) grub> ls -l (hd0,1) (hd0,msdos2) (hd0,msdos1) Partition hd0,1: Filesystem type xfs, UUID 250008ab-9fde-4892-a8b7-a38882b1a1448 - Partition start at 1024KiB - Total size 512000Kib Partition hd0,msdos2: No known filesystem detected - Partit...

...rs. I have many different Dell model, they all worked well with PXE booting however not for E5510. I noticed that using "LocalBoot -1 or 0" doesn't work well. What I did use for Latitude E5510 (Bios A06) was same to "LOCALBOOT on IBM x3850 X5" COM32 Chain.c32 Append hd0 0 Not "Append hd0" It works and boots to local disk without any problems. Thanks Beau Cockburn Computer Technician St Clair Catholic District School Board.

On 8/5/2015 1:00 PM, Chris Murphy wrote: > On Wed, Aug 5, 2015 at 10:52 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: >> How would I go about pointing it at the partition? >> >> What I am currently doing is this: >> device (hd0) /dev/hdg >> root (hd0,0) >> setup (hd0) > > setup (hd1,0) > > It's hd1 if your device map is correct and hdg is hd1. And then ,0 is > for the first partition assuming that's an ext3 boot partition. What I am doing on my other system (where everything is working)...

On 08/05/2015 10:23 AM, Chris Murphy wrote: > Nothing about hd0 or hd1 gets baked into the bootloader code. It's an > absolute reference to a physical drive at the moment in time the > command is made. Is that true? If I have a system with two disks, where device.map labels one as hd0 and the other as hd1, and I swap those numbers, the resulting b...

Please apply that patch to squeeze, otherwise you will not be able to boot even a standard squeeze installation! Since there is no pv-grub in squeeze I think it's quite important to fix it. Cheers, Darkbasic

Package: xen-utils-4.0 Version: 4.0.1-1 Severity: normal Tags: patch pygrub could not boot a newly-updated Debian/testing domU with a non-chained grub2. The traceback was: Using <class 'grub.GrubConf.Grub2ConfigFile'> to parse /grub/grub.cfg WARNING:root:Unknown directive load_video WARNING:root:Unknown directive terminal_output Traceback (most recent call last): File

...n jump directly to > stage 2 if it's in the MBR gap. But your partition scheme doesn't have > an MBR gap, you've started the first partition at LBA 1. So that means > it'll have to use block lists... > >> I installed grub on the new drive: >> grub> device (hd0) /dev/hdg >> >> grub> root (hd0,0) >> Filesystem type is ext2fs, partition type 0xfd >> >> grub> setup (hd0) >> Checking if "/boot/grub/stage1" exists... no >> Checking if "/grub/stage1" exists... yes >> Checking if &...

...menuentry ''Fedora, with Xen hypervisor'' --class fedora --class gnu-linux --class gnu --class os --class xen $menuentry_id_option ''xen-gnulinux-simple-781b00e4-5f5b-43fe-ba20-545bed174aa2'' { insmod part_msdos insmod ext2 set root=''hd0,msdos2'' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint=''hd0,msdos2'' 6243d00d-50ce-44fc-a0f3-49a843b64bbc else se...

...mount /dev/md1 /mnt/rescue # mount /dev/md0 /mnt/rescue/boot # mount -o bind /dev /mnt/rescue/dev # mount -o bind /proc /mnt/rescue/proc # mount -o bind /dev/shm /mnt/rescue/dev/shm # mount -o bind /sys /mnt/rescue/sys # chroot /mnt/rescue *I checked the device.map* # cat /boot/grub/device.map (hd0) /dev/sda (hd1) /dev/sdb *And, install the grub.* # grub Probing devices to guess BIOS drives. This may take a long time. GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command comple...

...ler and other dependencies, which may not be possible on a production system. > Also the new version is not available in repo. > > > > Im getting antother problem : > > while running these commands im getting error : > guestfish -- add /dev/null : config -set > drive.hd0.file=rbd:ssd-clonetest-rule5/ubuntu-12.04--1.raw.img : run : > inspect-os > /dev/ubuntu-1204-vg/root > [root@EQkvm0101 ~]# guestfish -- add /dev/null : config -set > drive.hd0.file=rbd:ssd-clonetest-rule5/ubuntu-12.04--1.raw.img : > inspect-get-distro /dev/ubuntu-1204-vg/root > l...

...1:00 PM, Chris Murphy wrote: >> >> On Wed, Aug 5, 2015 at 10:52 AM, Bowie Bailey <Bowie_Bailey at buc.com> >> wrote: >>> >>> How would I go about pointing it at the partition? >>> >>> What I am currently doing is this: >>> device (hd0) /dev/hdg >>> root (hd0,0) >>> setup (hd0) >> >> >> setup (hd1,0) >> >> It's hd1 if your device map is correct and hdg is hd1. And then ,0 is >> for the first partition assuming that's an ext3 boot partition. > > > What I am doi...

...(unrelated lines removed): /dev/md2 / ext3 defaults 1 1 /dev/md0 /boot ext3 defaults 1 2 /dev/md1 swap swap defaults 0 0 I installed grub on the new drive: grub> device (hd0) /dev/hdg grub> root (hd0,0) Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... yes Checking if "/grub/stage2" exists... yes Checking if "/grub/e2fs_s...

...menu items where user can't add boot options nobootoptions=harddisk,memtest ; main menu items that are not passed an 'install' parameter noinstallopt=harddisk,firmware,memtest [/"gfxboot.cfg"] ["isolinux.cfg"] ui gfxboot.c32 bootlogo label harddisk com32 chain.c32 hd0 exit [/"isolinux.cfg"] As usual, using 3 or more menu entries is recommended so to avoid the minor "quirks" when using less than that amount. Please don't forget to use unique LABELs without special characters (such as spaces). Alternatives for potential testing, either...

...xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root=''hd0,gpt2'' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 0b8cebb6-e937-402c-b9e1-16d4e422b590 else search --no-floppy --fs-uuid --set=root 0b8cebb6-e937-402c-b9e1-16d4e422b590 fi...

...system, I can chainload grub or windows loader, and this is OK. But in case with two Windows systems, when I installed second system, the installer added multi boot loader(I think it's called bootmgr), and then I can't choose the proper OS via syslinux config because chainloading(append hd0 1, append hd0 2) is not working (I get the "ntldr is missing" error). When I try boot from mbr (hd0 0), multi boot loader shows up, and then I can choose OS manually, but I really don't know how to choose it automatically(via pxelinux config file). I appreciate your help, -nevee

Hello, I've been having a problem trying to boot from first hard drive via pxelinux 5.01 on a HP Proliant server having a SmartArray P220i RAID controller. On other hardware and VMs that i've tried it works. My config file looks like this: label localboot kernel chain.c32 append hd0 Is this a known issue or has anyone experienced this? Thanks, Andrei

...d-sheepdog-etc-using-libguestfs/#comment-8806 > > I came across this link and and i was able to retrieve the rbd image. > > > > $ guestfish > > ><fs> set-attach-method appliance > > ><fs> add-drive /dev/null > > ><fs> config -set drive.hd0.file=rbd:pool/volume > > ><fs> run > > I was able to retrieve file from rbd image using the above method. > > > > Would you please let know how to do this in a single command line. I am > > getting the following error > > > > guestfish add /dev/nu...

...21.4 GB, 21474836480 bytes 213 heads, 34 sectors/track, 5791 cylinders Units = cylinders of 7242 * 512 = 3707904 bytes Device Boot Start End Blocks Id System /dev/vda1 1 5792 20970496 83 Linux <><> cat /boot/grub/device.map shows: (hd0) /dev/vda <><> However grub cannot find the /boot/grub/stage1. I ran grub and did the following: device (hd0) /dev/vda OK root (hd0,0) Filesystem type is ext2fs, partition type 0x83 setup (hd0) Checking if "/boot/grub/stage1" exists... no Checking if "/...

...em to be official directives on doing that sort of thing. But nothing I have tried so far will allow me, using syslinux, to boot the iso dd'd to that partition--regardless of whether I specify in the syslinux.cfg entry the address of the iso's mbr, or the partition's location (e.g., hd0, 5). One point of confusion I have is how to specify the drive that syslinux is booted from, and thus the one on which the dd'd partition is located: it being a USB drive rather than the computer's hard drive, perhaps hd0 is not the correct specifier? Can anyone offer clarification on t...