similar to: Salicru SPS One in Debian

On Nov 8, 2013, at 3:23 AM, Josu Lazkano wrote: > Hello, I have a Salicru SPS One 700VA device, I want to manage it with > Debian Whezzy. > > I read some information in the net about how to configure but I can > not get it working. I'm assuming you mean this blog post? http://blog.ciberterminal.net/2013/04/28/ups-salicru-en-nut/ > Could you help with this? > >

Not of a big help here, but I think it's a voltronic power vesta 650: http://www.voltronicpower.com/oCart2/index.php?route=product/product&path=37&product_id=52 If that is the case, it should work both with the blazer drivers (i.e. all but the shutdown sequence) and with the now defunct voltronic ones. With arno's words: "We are currently merging a new driver to replace

Hello all, I have a Salicru UPS (Salicru SPS One 700VA) working great in Debian Wheezy, but I want to move it to a OpenWRT router. I configured same as in Debian but I can not get it working: # upsd Network UPS Tools upsd 2.6.5 fopen /var/run/upsd.pid: No such file or directory listening on 192.168.1.240 port 3493 /etc/nut/ is world readable Can't connect to UPS [salicru]

On 8/19/20 12:55 PM, Marc Franquesa wrote: > Thanks all for the quick responses on the question (always a good sign > of this mailing list). > > (Tim Dawson, Manuel Wolfshant): > Regarding root cause of my current problem pointing to a faulty > battery, this is not the first time that someone points to it. However > I made a simple test with the vendor tools (Windows) and

On Feb 8, 2015, at 2:29 PM, Josu Lazkano <josu.lazkano at gmail.com> wrote: > # upsd > Network UPS Tools upsd 2.6.5 > fopen /var/run/upsd.pid: No such file or directory > listening on 192.168.1.240 port 3493 > /etc/nut/ is world readable > Can't connect to UPS [salicru] (blazer_usb-salicru): No such file or directory Check the messages from the blazer_usb driver when

Sorry, because this is not a technical question rather than a Hardware advice/recommendation. I have been using NUT-UPS perfectly for more than 7 years using two different Eaton/MGE models. After a battery replacement (replaced 1 year ago) after 5 years of service, my current unit seems to behave faulty, as just after 1-2 minutes of power outage, shows the LB battery flag and sets FSD although

Hi, my name is Sebasti?n from Spain I need help for that. I have 2 salicru ups I need monitor with a fedora 14 pc. Someone knows if i can configure ups.conf to monitor one or another ups? only make a upsc "ups" for take data. The upses are connected via usb and nut always read the first one connected. The upses are the same model. Thanks for all! Sebasti?n Le?n del Moral urticaries at

Hello, I wanted to send an email to the administrator of the web to update an information, I do not know if this mailing list is appropriate. I just wanted to say that I have a UPS SALICRU SOHO + 1600VA and after several days trying to configure it I found out the problem. This UPS has usb 1.0 HID, so it does not work with the driver usb blazer if you have to use the driver usbhid-ups. I think

I have a device that seems almost, but not quite supported, I'd like very much to help get it working, though I am no programmer. Feel free to ask me to test :) This could probably go in https://networkupstools.org/ddl/ : -------file: Salicru__SPS_2000_ADV_T__usbhid-ups__2.8.1-94-gd59c05349__01.dev , or maybe 1__2000__usbhid-ups__2.8.1-94-gd59c05349__01.dev # DEVICE:URL:VENDOR:

Thanks Charles, This is the permission tree: # ls -l /dev/bus/usb/001/001 crw-r--r-- 1 root root 189, 0 Feb 8 20:23 /dev/bus/usb/001/001 If I attache the USB cable there is nothing in dmesg, and there is nothing in lsusb: # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub It looks like it is not detected. In Debian it looks great: # lsusb Bus 004 Device

I would also be very interested in this topic. Best Regards, Bart pon., 17 sie 2020, 12:55 użytkownik Marc Franquesa <marc.franquesa at gmail.com> napisał: > Sorry, because this is not a technical question rather than a Hardware > advice/recommendation. > > I have been using NUT-UPS perfectly for more than 7 years using two > different Eaton/MGE models. > > After a

Thanks all for the quick responses on the question (always a good sign of this mailing list). (Tim Dawson, Manuel Wolfshant): Regarding root cause of my current problem pointing to a faulty battery, this is not the first time that someone points to it. However I made a simple test with the vendor tools (Windows) and didn't found any issue, as well as they discharged normally (although only

I have a possibility of acquiring a 6KVA UPS made the Spanish comapny Salicru - it's fairly cheap, but weighs about 350kg, so before I go any further, I'd like to hear if anyone's got any experience with this make? /Per Jessen, Z?rich

On Aug 19, 2020, at 6:22 AM, Manuel Wolfshant wrote: > > On 8/19/20 12:55 PM, Marc Franquesa wrote: >> Thanks all for the quick responses on the question (always a good sign of this mailing list). >> >> (Tim Dawson, Manuel Wolfshant): >> Regarding root cause of my current problem pointing to a faulty battery, this is not the first time that someone points to it.

My experience on situations like this is that it is almost always a bad battery.  Once load is removed, the voltage bounced back, and thus you show time/capacity, but it's possible that the sag under load drops you into LB, and causes the shutdown. If the UPS has a battery test, give it a try, or load test the battery external to the UPS if you can - I suspect that the UPS will be fine,

Hi all. I'm under Ubuntu 7.10 server I use a SALICRU UPS Advance I install nut and nut-usb, write some config files, but i cannot connect to UPS. At ups.conf i wrote: [salicru] driver = newhidups port = auto desc = "Desc" But if try to make "sudo upsdrvctl start" it said: No matchin HID UPS found If i write "lsusb" appears: Bus 001: Device 007: Id

hello, I have install samba4 on debian whezzy 64-bit All is working OK, but now I try to add qoutas to users and this tutorial did not working https://wiki.samba.org/index.php/Samba4/Winbind when i write getent passwd i did't see users from AD so e.g. # id Administrator id Administrator: There is no such user Pozdrowienia ------------------------------------------ dafr32 dafr32 at

Greetings, I'm fiddling with Xen at home, the dom0 is a freshly installed Debian stable (current 6.0.6 squeeze) using LVM over RAID. I want to use two VGs, so the pointy-clicky won't really do since --lvm only takes one argument (i assume). That's no big deal, i can use LVM tools and even the partitions.d scripts xen-tools can use and provide a partition template through the

Hello list, I have a "Salicru SPS One 700VA" in a Debian Wheezy server. I configured a week ago, it works well, but today it start to show "UPS salicru at 192.168.x.x:3493 is unavailable" And I got this in the system logs: # dmesg [147080.501925] usb 4-5: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 128 rq 6 len 255 ret -62 [147080.503913] usb 4-5: usbfs:

I was wondering if anyone has seen anything like this standby power supply for Dell servers. http://www.ebay.co.uk/itm/200824909297?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 I made up a cable and can connect to it at 9600 baud 8N1. The problem is that all it ever does is respond with a "?" and ends it with a LF it does this whenever it recieves a LF - I'm begining to