Hello, I have a Salicru SPS One 700VA device, I want to manage it with Debian Whezzy. I read some information in the net about how to configure but I can not get it working. Could you help with this? This is the log when I connect the USB: [ 3194.688204] usb 4-4: new low-speed USB device number 2 using ohci_hcd [ 3194.857239] usb 4-4: New USB device found, idVendor=0665, idProduct=5161 [ 3194.857250] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3194.857258] usb 4-4: Product: USB to Serial [ 3194.857264] usb 4-4: Manufacturer: INNO TECH [ 3194.997545] generic-usb 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.00 Device [INNO TECH USB to Serial] on usb-0000:00:12.0-4/input0 [ 3194.997596] usbcore: registered new interface driver usbhid [ 3194.997601] usbhid: USB HID core driver OS name and version: Debian Whezzy (3.2.0-4-amd64 kernel) NUT version: 2.6.4-2.3 NUT installation method: apt-get install nut exact device name and related information: Salicru SPS One 700VA I try with this configuration: nut.conf: http://paste.debian.net/plain/64527 ups.conf: http://paste.debian.net/plain/64528 upsd.conf: http://paste.debian.net/plain/64529 upsd.users: http://paste.debian.net/plain/64530 upsmon.conf: http://paste.debian.net/plain/64531 When I try to get the device info, I get this: # upsc salicru Error: Driver not connected Could someone with same device give me some help? Thanks and best regards. -- Josu Lazkano
On Nov 8, 2013, at 3:23 AM, Josu Lazkano wrote:> Hello, I have a Salicru SPS One 700VA device, I want to manage it with > Debian Whezzy. > > I read some information in the net about how to configure but I can > not get it working.I'm assuming you mean this blog post? http://blog.ciberterminal.net/2013/04/28/ups-salicru-en-nut/> Could you help with this? > > This is the log when I connect the USB: > > [ 3194.688204] usb 4-4: new low-speed USB device number 2 using ohci_hcd > [ 3194.857239] usb 4-4: New USB device found, idVendor=0665, idProduct=5161 > [ 3194.857250] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 3194.857258] usb 4-4: Product: USB to Serial > [ 3194.857264] usb 4-4: Manufacturer: INNO TECH > [ 3194.997545] generic-usb 0003:0665:5161.0001: hiddev0,hidraw0: USB > HID v1.00 Device [INNO TECH USB to Serial] on > usb-0000:00:12.0-4/input0 > [ 3194.997596] usbcore: registered new interface driver usbhid > [ 3194.997601] usbhid: USB HID core driver > > OS name and version: Debian Whezzy (3.2.0-4-amd64 kernel) > NUT version: 2.6.4-2.3 > NUT installation method: apt-get install nut > exact device name and related information: Salicru SPS One 700VA > > I try with this configuration: > > nut.conf: http://paste.debian.net/plain/64527It's really not necessary to use a pastebin for a one-line configuration file...> ups.conf: http://paste.debian.net/plain/64528 > upsd.conf: http://paste.debian.net/plain/64529 > upsd.users: http://paste.debian.net/plain/64530I would recommend changing the password once you put this system into production.> upsmon.conf: http://paste.debian.net/plain/64531 > > When I try to get the device info, I get this: > > # upsc salicru > Error: Driver not connectedWhat other startup and debugging steps did you take? For testing on Debian, I would try 'sudo /lib/nut/blazer_usb -a salicru -DDD' If that works, you can ^C that and run 'sudo /etc/init.d/nut-server start'. -- Charles Lepple clepple at gmail
Not of a big help here, but I think it's a voltronic power vesta 650: http://www.voltronicpower.com/oCart2/index.php?route=product/product&path=37&product_id=52 If that is the case, it should work both with the blazer drivers (i.e. all but the shutdown sequence) and with the now defunct voltronic ones. With arno's words: "We are currently merging a new driver to replace blazer_* and would also appreciate feedback on this if you can." 2013/11/9 Charles Lepple <clepple at gmail.com>:> On Nov 8, 2013, at 3:23 AM, Josu Lazkano wrote: > >> Hello, I have a Salicru SPS One 700VA device, I want to manage it with >> Debian Whezzy. >> >> I read some information in the net about how to configure but I can >> not get it working. > > I'm assuming you mean this blog post? > > http://blog.ciberterminal.net/2013/04/28/ups-salicru-en-nut/ > >> Could you help with this? >> >> This is the log when I connect the USB: >> >> [ 3194.688204] usb 4-4: new low-speed USB device number 2 using ohci_hcd >> [ 3194.857239] usb 4-4: New USB device found, idVendor=0665, idProduct=5161 >> [ 3194.857250] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >> [ 3194.857258] usb 4-4: Product: USB to Serial >> [ 3194.857264] usb 4-4: Manufacturer: INNO TECH >> [ 3194.997545] generic-usb 0003:0665:5161.0001: hiddev0,hidraw0: USB >> HID v1.00 Device [INNO TECH USB to Serial] on >> usb-0000:00:12.0-4/input0 >> [ 3194.997596] usbcore: registered new interface driver usbhid >> [ 3194.997601] usbhid: USB HID core driver >> >> OS name and version: Debian Whezzy (3.2.0-4-amd64 kernel) >> NUT version: 2.6.4-2.3 >> NUT installation method: apt-get install nut >> exact device name and related information: Salicru SPS One 700VA >> >> I try with this configuration: >> >> nut.conf: http://paste.debian.net/plain/64527 > > It's really not necessary to use a pastebin for a one-line configuration file... > >> ups.conf: http://paste.debian.net/plain/64528 >> upsd.conf: http://paste.debian.net/plain/64529 >> upsd.users: http://paste.debian.net/plain/64530 > > I would recommend changing the password once you put this system into production. > >> upsmon.conf: http://paste.debian.net/plain/64531 >> >> When I try to get the device info, I get this: >> >> # upsc salicru >> Error: Driver not connected > > > What other startup and debugging steps did you take? > > For testing on Debian, I would try 'sudo /lib/nut/blazer_usb -a salicru -DDD' > > If that works, you can ^C that and run 'sudo /etc/init.d/nut-server start'. > > -- > Charles Lepple > clepple at gmail > > > > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser