Nut upsuser - Jan 2008 - Installation and config; not found driver

Hi all.

I'm under Ubuntu 7.10 server

I use a SALICRU UPS Advance

I install nut and nut-usb, write some config files, but i cannot connect to
UPS.

At ups.conf i wrote:

[salicru]
driver = newhidups
port = auto
desc = "Desc"

But if try to make "sudo upsdrvctl start" it said: No matchin HID UPS
found

If i write "lsusb" appears:

Bus 001: Device 007: Id 06da:0003 Phoenixtec Power Co. Ltd

I had a rule at /etc/udev/rules.d/60-local.rules like:

http://www.theefrit.com/blog/2006/10/17/sai-mge-ellipse-premium-y-linux/ but
changing Device to mine (06da:0003)

But i cannot make it work.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080130/3fbd91fb/attachment.htm

Den Wednesday 30 January 2008 16.11.15 skrev Chencho
Pc-cito:
> Hi all.
>
Hi Chencho,
> I'm under Ubuntu 7.10 server
>
> I use a SALICRU UPS Advance
>
> I install nut and nut-usb, write some config files, but i cannot connect to
> UPS.
>
> At ups.conf i wrote:
>
> [salicru]
> driver = newhidups
> port = auto
> desc = "Desc"
>
Try the megatec_usb driver instead.

> But if try to make "sudo upsdrvctl start" it said: No matchin HID
UPS found
>
> If i write "lsusb" appears:
>
> Bus 001: Device 007: Id 06da:0003 Phoenixtec Power Co. Ltd
>
> I had a rule at /etc/udev/rules.d/60-local.rules like:
>
> http://www.theefrit.com/blog/2006/10/17/sai-mge-ellipse-premium-y-linux/
> but changing Device to mine (06da:0003)
>
> But i cannot make it work.
Regards
Kjell

[please keep the list CC'd]

On Jan 30, 2008 1:37 PM, Chencho Pc-cito <chencho at pc-cito.com>
wrote:
> Hi again.
>
> I add repository and unistall nut and nut-usb
>
> Then install it again (only nut) and now i have the 2.2.x and can use
> megatec_usb
>
> But, when i try to make upsdrvctl start i get:
>
> (...) No supported devices (...)
>
> maybe rules from udev dont work??
Can you post the version numbers of udev and the Linux kernel?

Also, what does your modified udev rules file look like?

-- 
- Charles Lepple