Nut upsdev - Feb 2019 - UPS SALICRU SOHO+1600 driver & update web

Hello,

I wanted to send an email to the administrator of the web to update an
information, I do not know if this mailing list is appropriate.
I just wanted to say that I have a UPS SALICRU SOHO + 1600VA and after several
days trying to configure it I found out the problem.
This UPS has usb 1.0 HID, so it does not work with the driver usb blazer if you
have to use the driver usbhid-ups.
I think this could help many users who want to configure UPS SALICRU SOHO in a
raspberry. Before installing NUT in raspberry,
when connecting the UPS to the raspberry it recognizes the connected usb but it
disconnects every 15 or 20 seconds and it is assigned a
new device number, according to what I have read, it is a defect of the UPS and
not that The NUT driver call this USB device is
disconnected continuously. logically the usb driver blazer did not work until it
switches to the usbhid-ups driver and then the call to
the USB device connected to raspberry occurs and there are no longer continuous
disconnections of the device.
Previously I had a SALICRU SPS ONE 900 UPS that did work with the USB driver
perfectly.
I hope this information helps other people and can include the SOHO series with
the corresponding driver on the Network UPS TOOLS website.

Thank you all for your work.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20190224/d3e24f8b/attachment.html>