similar to: Zigor Ebro 650 compatibility - revisited (on Windows, at least)

2013/9/16 Martyn Hill <martyn.joseph.hill at gmail.com>: > Hi Arnaud and NUT team > > You may recall some time ago, I and a few others posted questions about the > above referenced (cheap and cheerful) USB-based UPS - specifically regarding > FreeBSD USB support in NUT. The original posting was entitled "Zigor Ebro > 650 compatibility". > > I've since

On 10/08/2012 21:58, nut-upsuser-request at lists.alioth.debian.org wrote: >>> Arnaud Quette<aquette.dev<at> gmail.com> writes: >>>> 2012/6/3 Chris Rees<crees<at> freebsd.org>: >>>>> Hi all, >>>> Hi Chris, >>>> >>>>> After some research I've found that this device should run with the

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi all, After some research I've found that this device should run with the blazer_usb driver. Jun 3 16:15:38 pegasus kernel: ugen0.4: <vendor 0x0001> at usbus0 Jun 3 16:15:38 pegasus kernel: uhid0: <vendor 0x0001 product 0x0000, class 0/0, rev 1.00/1.00, addr 4> on usbus0 However, even after shoehorning it; [crees at pegasus]/usr/local/libexec/nut% sudo ./blazer_usb -a zigor

Hi, i just got a Phoenix Technologies PH1200UPSB 1200va serial-port ups and it is only partially supported by bestups driver (needs manual ID or driver rewriting). It comes with a tool called UPSilon 2.1 on a CD (which worked better with TERM=linux). After [sl]tracing it i came to these results: COMMANDS : - Command: I Response: "#XPHOENIX TECH PH1200UPS VER2.00C " - Command: F

Hi, I'm using macports to install nut on a MAC OS X (10.7) I get the following error messages when I try running: sudo blazer_usb -a zigor -DDDDDDDDDD 0.944590 Checking device (0001/0000) (250/005) 2.785449 - VendorID: 0001 2.785465 - ProductID: 0000 2.785468 - Manufacturer: unknown 2.785472 - Product: STD UPS MON V1.0 2.785475 - Serial Number: unknown

Hello, I'm trying to get an energenie EG-UPS-033 (http://energenie.com/item.aspx?id=8087) to work with nut. It standard comes with linux software (UPSmart), which shows the input/output voltage, load level, input frequency. and battery and case temperature. The values change about every second. The selected monitor mode in this tool is Mega(USB). The bad thing of this tool that it

http://www.zigor.com/uk/index.php/en/products/upssystems/danubioseries Ships with UPSilon 2000 software, and appears to work with blazer_usb to a certain extent with the following config: [danubio] driver = blazer_usb langid_fix = 0x409 port = stupidly, I seem to have to set this even though it's ignored vendorid=0001 productid=0000 Yes, vendor 0001,

Hey all, thanks for your work on nut. I recently got myself a new cheap UPS, and have thus far determined very little about it. I can run whatever you like to help identify and work with it. So far I've played around with various settings and have had some limited success with the megatec_usb driver (Debian testing version): ----ups.conf---- [plexus] driver=megatec_usb model=500VA mfr=Plexus

Hi All! I have a traoble whith my ups, - megatec driver can not calculating % of charging and voltage on battery: # uname -a FreeBSD backup.*.*.* 8.1-RELEASE FreeBSD 8.1-RELEASE #0: Wed Sep 22 12:25:01 EEST 2010 ups.conf [Powercom] driver = megatec port = /dev/cuau0 #battvolts=12:24 desc = "powercom sxl-1000A" # ./nut start Network UPS Tools - UPS driver controller 2.4.1

Hello Fabian, > I got my UPS (Belkin F6H350deUNV) to work with the "megatec" driver. > Obviously the de/uk part in the name of these products are > localizations of some sort. So the F6H 350/500/750 UNV Home Office > products should all work with that driver. > > bigone nut # upsc ups@localhost > battery.charge: 95.0 > battery.voltage: 13.50 >

Hi Volker Kuhlmann and Richard Nelson, As both of you are interested in where I got up to with getting my Dynamix 1000 VA UPS working with Linux, here is the details. It works.. But not too well, as the driver still seems to need some work, and is not in the main nut source as far as I know. It also seems to sometimes not respond when it should. The manufacture has uses the same format as

Hi, i've got similar problem with an OVISLINK 1000VA UPS on Debian. I've tried to connect with it using different drivers and this is what I get with each of them: [UPS] driver = blazer_usb vendorid = 0001 productid = 0000 port = auto subdriver = phoenix sweethome:~# /lib/nut/blazer_usb -a UPS -u root -DDD Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4) 0.000000

I checked it with the Windows machine. There are nearly no parameters to set directly to the ups. The only thing to set is the low battery-state. All other settings seem to run on the windows machine only. Ups.delay.start was set to 30 after Windows-configuration. The rest seems to be unattended: Init SSL without certificate database battery.charge: 64 battery.charge.low: 10

Dear Charles and team Just thought to share my findings getting a Sweex PP200 650VA UPS working with NUT (I didn't see this particular model listed on the HCL.) I picked-up one of these units quite cheaply at a Maplins store (before the chain closed-down) as a second UPS for my home/office - the first being an old Zigor Ebro650 - a long story for another post... NUT v2.7.4_7 is running

Hi Folks, I'm trying to use a ZIGOR Danubio 2000 ups with NUT on Debian squeeze (AMD64). OS/NUT are all the latest official release (as of last week) with NUT installed from packages. As the usb descriptor presents MEC (and the Fry's electronics) I chose to use the blazer_usb driver. All appears to work well excepting that the UPS does not appear to accept the shutdown instcmd to turn

hi @ all, i just wonder, if it is posible to read the values for all the three phases of a mge galaxy 6000 ups? we have unfortunately one mge comet ups (one phase) to play at work, but it is important to know, how many information upsc can deliver from a galaxy. we plane to use web / snmp interface. can someone post the upsc from such ups? thanks in advance, miroslav -- SHALTEV.ORG

Finally I got time to test this. >>> Can you post the output of upsc, and note if any of those values look >>> wrong? serwer2:/tmp/nut-fabula # upsc myups battery.charge: 100 battery.voltage: 13.10 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.model: 500VA UPS device.type: ups driver.name: nutdrv_qx driver.parameter.pollfreq: 30

Hi there, my HP R1500 G3 UPS doesn't apply my battery.charge.low value i set via upsrw. Is this a common problem with this model in nut 2.6.4? Any ideas how to force the UPS to accept this value? Regards Jan % upsc hp1500 battery.charge: 100 battery.charge.low: 20 battery.charge.warning: 20 battery.runtime: 23917 battery.temperature: 49.0 battery.type: PbAc battery.voltage: 39.0