2012/8/10 Martyn Hill <martyn.joseph.hill at gmail.com>
> On 10/08/2012 21:58, nut-upsuser-request at
lists.**alioth.debian.org<nut-upsuser-request at
lists.alioth.debian.org>wrote:
>
>> Arnaud Quette<aquette.dev<at> gmail.com> writes:
>>>>
>>>>> 2012/6/3 Chris Rees<crees<at> freebsd.org>:
>>>>>
>>>>>> Hi all,
>>>>>>
>>>>> Hi Chris,
>>>>>
>>>>> After some research I've found that this device should
run with the
>>>>>> blazer_usb driver.
>>>>>>
>>>>>> Jun 3 16:15:38 pegasus kernel: ugen0.4:<vendor
0x0001> at usbus0
>>>>>> Jun 3 16:15:38 pegasus kernel: uhid0:<vendor 0x0001
product 0x0000,
>>>>>> class 0/0, rev 1.00/1.00, addr 4> on usbus0
>>>>>>
>>>>>> However, even after shoehorning it;
>>>>>>
>>>>>> [crees<at> pegasus]/usr/local/libexec/**nut%
sudo ./blazer_usb -a
>>>>>> zigor
>>>>>> -DDDDDDDDD -x vendorid=0x0001 -x productid=0x0000 -x
subdriver=krauler
>>>>>> Password:
>>>>>> Network UPS Tools - Megatec/Q1 protocol USB driver 0.04
>>>>>> (2.6.3-Unversioned directory)
>>>>>> 0.000000 send_to_all: SETINFO
driver.parameter.vendorid
>>>>>> "0x0001"
>>>>>> 0.000013 send_to_all: SETINFO
driver.parameter.productid
>>>>>> "0x0000"
>>>>>> 0.000018 send_to_all: SETINFO
driver.parameter.subdriver
>>>>>> "krauler"
>>>>>> 0.000020 debug level is '9'
>>>>>> 0.000874 language ID workaround enabled (using
'0x409')
>>>>>> 0.001019 No appropriate HID device found
>>>>>> 0.001025 No supported devices found. Please
check your device
>>>>>> availability with 'lsusb'
>>>>>> and make sure you have an up-to-date version of NUT. If
this does not
>>>>>> help,
>>>>>> try running the driver with at least
'subdriver', 'vendorid'
>>>>>>
>>>>> and 'productid'
>>>>
>>>>> options specified. Please refer to the man page for details
about these
>>>>>>
>>>>> options
>>>>
>>>>> (man 8 blazer).
>>>>>>
>>>>>> This is on FreeBSD with NUT updated to 2.6.3 (I've
modified the port).
>>>>>>
>>>>>> Hi Chris
>>>>
>>>> Any chance you could share the FreeBSD port? Using the version
(2.6.1)
>>>> currently available in the ports tree, I can get a step closer
than
>>>> your tests
>>>> above, but without the enhanced blazer_usb driver (0.0.4) in
nut 2.6.3,
>>>> I
>>>> don't think I can get any further.
>>>>
>>> All you need to do is edit the PORTVERSION value in the Makefile,
and
>>> run make makesum :)
>>>
>>> I've just successfully upgraded to 2.6.4 this way....
>>>
>>
> Aha!
>
> I also found a FreeBSD port patch on-line for 2.6.4 that has yet to be
> committed to the ports-tree. I'll try your route against the latest NUT
> release and see what we get.
guys, I've released 2.6.5 yesterday! go the 2.6.5 route ;)
>
>
>>> The UPS comes with UPSilon, but it's several years (!) old and
I can't
>>>>>> even get it to install, let alone work.
>>>>>>
>>>>>> Have I sent enough info? I'm willing to have a go
at hacking the
>>>>>> driver, but having trouble getting started.
>>>>>>
>>>>>> Chris
>>>>>>
>>>>>> [crees<at> pegasus]/usr/local/libexec/**nut%
grep -v
>>>>>>
>>>>> ^# /usr/local/etc/nut/ups.conf
>>>>
>>>>> [zigor]
>>>>>> port = auto
>>>>>> driver = blazer_usb
>>>>>> langid_fix = 0x409
>>>>>> desc = "Zigor UPS"
>>>>>> vendorid = 0001
>>>>>> productid = 0000
>>>>>>
>>>>> it's quite probably due to a permission issue.
>>>>> See "4) Permissions" on
>>>>>
>>>>
http://people.freebsd.org/~**thierry/nut_FreeBSD_HowTo.txt<http://people.freebsd.org/%7Ethierry/nut_FreeBSD_HowTo.txt>
>>>>
>>> Thanks Arnaud, and sorry for the delay-- I've been on holiday.
>>>
>>> As I mentioned above I've now got it to 2.6.4, and have a new
message;
>>>
>>> [crees at pegasus]/usr/local/**libexec/nut% sudo ./blazer_usb -a
zigor
>>> -DDDDDDDDDDDDD
>>> Network UPS Tools - Megatec/Q1 protocol USB driver 0.08
>>> (2.6.4-Unversioned directory)
>>> 0.000000 debug level is '13'
>>> 0.001081 Checking device (0001/0000)
(/dev/usb//dev/ugen2.3)
>>> 0.001688 - VendorID: 0001
>>> 0.001694 - ProductID: 0000
>>> 0.001697 - Manufacturer: unknown
>>> 0.001701 - Product: unknown
>>> 0.001705 - Serial Number: unknown
>>> 0.001708 - Bus: /dev/usb
>>> 0.001712 Trying to match device
>>> 0.001717 Device matches
>>> 0.001737 send_to_all: SETINFO ups.vendorid "0001"
>>> 0.001744 send_to_all: SETINFO ups.productid
"0000"
>>> 0.001751 send_to_all: SETINFO device.type "ups"
>>> 0.001758 send_to_all: SETINFO driver.version
"2.6.4-Unversioned
>>> directory"
>>> 0.001764 send_to_all: SETINFO driver.version.internal
"0.08"
>>> 0.001770 send_to_all: SETINFO driver.name
"blazer_usb"
>>> 0.001775 Trying megatec protocol...
>>> 0.001786 send: Q1
>>> 0.002191 read: Unknown error
>>> 0.002242 Permissions problem: Input/output error
>>> [crees at pegasus]/usr/local/**libexec/nut%
>>>
>>> I had already chmod'd 777 all the USB nodes (just for debugging
of
>>> course!)
>>>
>>> and:
>>>
>>> [crees at pegasus]/usr/local/**libexec/nut% grep -v ^#
>>> /usr/local/etc/nut/ups.conf
>>> [zigor]
>>> port = auto
>>> driver = blazer_usb
>>>
>>> Looks as though the UPS is answering in strange ways....
>>>
>>> I applied the 2.6.4 patch and recompiled and, after chown'ing
the USB
> DEV nodes, got something very similar, effectively, the sequence:
>
> Trying megatec protocol...
> send: Q1
> read: Unknown error
> Permissions problem: Input/output error
>
> I tried various protocol filters, but only the (new) megatec protocol gets
> this far...
>
>
>
>> Just for fun, I noticed the #ifdef TESTING in blazer_usb.c.
>>
>> I defined that, and got this output when running ./blazer_usb -a zigor:
>>
>>
http://www.bayofrum.net/~**crees/scratch/zigor-testing.**txt<http://www.bayofrum.net/%7Ecrees/scratch/zigor-testing.txt>
>>
>> Any hints there?
>>
>
you've been fooled Chris.
TESTING just fakes good values for... testing purpose ;)
Nice!>
> I then installed the Upsilon s/w on my Windows XP laptop (which works
> effectively, even if it looks a bit 'old-school'..)
>
> I did take some comfort in seeing references to 'Megatec(USB)' in
the
> Upsilon software configuration...
>
> I ran USBSniff against the port whilst attaching the UPS. Unfortuately, I
> couldn't make much sense of the verbose USBSniff output, but if this is
> useful for debugging (for Arnaud?) I could share it.
>
yup, there are not many people left out there, that speak Q1...
could you please post a link, or a compressed archive (less than 40 Kb!)?
With suitable guidance, I'm happy to devote time to helping get this
UPS> working under NUT - I'd hate to have to build a Windows box just to
monitor
> the UPS which is currently protecting my FreeBSD server and broadband
> router...
>
> Regards and thanks for such a clever bit of software!
>
thanks for using it ;)
cheers,
Arno
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120810/17070f44/attachment-0001.html>