similar to: Eaxton 5PX : "No matching HID UPS found"

Hello, Just baught this ups to replace an Ellipse. I've had a look at the nut hardware compatibility list, it's fully compatible and uses the same driver as ellipse (usbhid-ups) Here is the error I get when I "/usr/bin/upsdrvctl start" : Network UPS Tools - UPS driver controller 2.6.5-Unversioned directory Network UPS Tools - Generic HID driver 0.37 (2.6.5-Unversioned

Charles, Thank you :) Here it is : # usbhid-ups -a 5px -DDDD Network UPS Tools - Generic HID driver 0.37 (2.6.5-Unversioned directory) USB communication driver 0.31 0.000000 debug level is '4' 0.000302 upsdrv_initups... 0.161480 Checking device (0424/2512) (001/002) 0.161518 Failed to open device, skipping. (Permission denied) 0.161527 Checking device

Hello, Since yesterday I try to make my Eaton 5PX 1500i RT2U work with nut. Clearly impossible : Network UPS Tools - UPS driver controller 2.6.5-Unversioned directory Network UPS Tools - Generic HID driver 0.37 (2.6.5-Unversioned directory) USB communication driver 0.31 No matching HID UPS found Driver failed to start (exit status=1) I've had a look at dmesg, and found this : [ 9.224361]

On Jan 16, 2018, at 6:07 PM, James Whitwell <jams at momento.com.au> wrote: > > This might be a simple thing to fix, but I can?t figure it out. We replaced the battery for the first time in our Eaton 5PX a couple of weeks ago, but we haven?t been able to clear the ?ups.alarm: replace battery!? status. > > Details of our installation are: > OS: Debian 6 > NUT version:

On Tue, Nov 12, 2024, at 11:49 PM, Harlan Stenn wrote: I just started shopping for my replacements: > I like batteries from RaionGroup.com or batterywholesale.com. Here is some free coincidental trivia. I was a sysadmin for the server behind batterywholesale.com for about 10 years. It was part time work. The couple behind the company have since sold the business and retired. I'm still

Harlan Stenn via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> writes: >> There was some doubt about F2 vs F1 connectors - I've contacted the supplier to clarify, but I think they're all F2 connectors that I want. > > That's been my experience too, but I'm not sure how much that counts > for. As I recall, the F2 connector is a bit wider than the F1,

On Mon, Nov 18, 2024, at 7:35 PM, Dan Langille via Nut-upsuser wrote: > On Tue, Nov 12, 2024, at 11:49 PM, Harlan Stenn wrote: > > I just started shopping for my replacements: > >> I like batteries from RaionGroup.com or batterywholesale.com. > > Here is some free coincidental trivia. > > I was a sysadmin for the server behind batterywholesale.com for about > 10

I thought I could clear the Eaton 5PX battery message. I've failed. The following is based on https://haefelfinger.ch/posts/2020/2020-09-23-reset-battery-alert-eaton-5p-ups/ I shutdown the UPS. I disconnected it from power. I disconnected both the main battery and the external battery pack. I pressed the power on button several times, until the clicking stopped.... I waited 10 minutes.

On 11/18/2024 6:18 PM, Dan Langille via Nut-upsuser wrote: > On Mon, Nov 18, 2024, at 7:35 PM, Dan Langille via Nut-upsuser wrote: >> On Tue, Nov 12, 2024, at 11:49 PM, Harlan Stenn wrote: >> >> I just started shopping for my replacements: >> >>> I like batteries from RaionGroup.com or batterywholesale.com. >> >> Here is some free coincidental

Hello, I have a EATON 5PX with a Network Management Card on ubuntu 12.04 I established a shutdown procedure like described in rogerprice.org It works I have an event mail on "onbatt" then another on "onbattdelay1" then the "upsmon -c fsd" order on "onbattedelay2" When "onbattdelay2" is finished, my server execute "auto logout and shutdown

On Wed, Nov 27, 2024, at 10:07 AM, Dan Langille via Nut-upsuser wrote: > On Tue, Nov 12, 2024, at 11:49 PM, Harlan Stenn wrote: >> I check the spec'd net weight of the batteries with the actual weight of >> each arriving battery. > > On the website, they say 5.73 pounds (5 lbs 11.6 oz). > > Two of the batteries were 5 lbs 11 oz. The rest were all 10, 9, or 8 oz.

On Tue, Nov 12, 2024, at 11:49 PM, Harlan Stenn wrote: > On 11/12/2024 10:58 AM, Dan Langille via Nut-upsuser wrote: >> Hello, >> >> nut recently told me that the batteries need replacing in my Eaton 5PX2200RT (ups) and 5PXEBM48RT (external battery pack). According to my notes, it has been just over 4 years since I installed them. Looking at on-line sales, these seem to use

Linux NUT 2.7.1 Eaton 5PX usbhid-ups It would appear that interrupts are not actually working on my 5PX using the usbhid-ups driver. I will be trying the serial mge-shut driver next. It just seemed like it was working before because of the default pollinterval of 2 seconds. The status update comes in during the pollinterval no matter what I have pollfreq set to. And I can set pollonly and

On Sun, Dec 22, 2024, at 2:53 PM, Dan Langille via Nut-upsuser wrote: > I thought I could clear the Eaton 5PX battery message. I've failed. > > The following is based on > https://haefelfinger.ch/posts/2020/2020-09-23-reset-battery-alert-eaton-5p-ups/ > > I shutdown the UPS. I disconnected it from power. I disconnected both > the main battery and the external battery

Hello, I have trouble connecting to an Eaton 5PX UPS via the usbhid-ups driver. It is supposed to be fully working according to the compatibility list (support level 5). OS: A fresh Debian stable install. Then changed the apt source to unstable and did "aptitute update" and "aptitude install nut". Nothing else. I did that, because the "unstable" package is a more

Dan Langille via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> writes: >> On the website, they say 5.73 pounds (5 lbs 11.6 oz). >> >> Two of the batteries were 5 lbs 11 oz. The rest were all 10, 9, or 8 oz. >> >> See my bar chart at https://bsd.network/web/@dvl/113555334752647203 > > The batteries are all within 3% of the expected weight. Seems

Hello, nut recently told me that the batteries need replacing in my Eaton 5PX2200RT (ups) and 5PXEBM48RT (external battery pack). According to my notes, it has been just over 4 years since I installed them. Looking at on-line sales, these seem to use batteries in a pre-packaged plastic shell. I don't recall if that's what's in my units or not. Do you have any experience with

On Wed, Nov 27, 2024, at 10:56 AM, Greg Troxel via Nut-upsuser wrote: > Dan Langille via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> > writes: > >>> On the website, they say 5.73 pounds (5 lbs 11.6 oz). >>> >>> Two of the batteries were 5 lbs 11 oz. The rest were all 10, 9, or 8 oz. >>> >>> See my bar chart at

resending, sorry, I mangled the list address. On Tue, Nov 12, 2024, at 11:49 PM, Harlan Stenn wrote: > - put each battery on a charger for several hours Do you have a recommendation for a battery charger? Or a list of features to look for? > Anyway, when I have a set of replacement new batteries, I then: > > - put each battery on a charger for several hours > - rotating thru

Hello I almost managed to make everything work my server isn't in prodution because i had some problem on others system but last week i come back and i run an update on ubuntu 12.04.1 to 12.04.2 I don't known if its' the reaseon or if someone has change something but scripts no longer work I have a message "returned 2" Can you help me because I don't find how to solve