similar to: [Fwd: Re: Can anyone give me some ideas?]

I use postfix + dovecot LDA + mysql virtual users and up til friday, everything was working just fine. Dovecot is 2.0.beta6 (3156315704ef) Like I said, up til friday, when I added a vacation entry into postfix (which I have now removed to see if it was the reason) mails to the alias virusalert (which is aliased to me) went through just fine. Now I get these sort of errors from the LDA: Feb

Hello! I can't get my UPS to get detected. I have tried to search the internet for several hours. I have a Mustek Powermust 1400 USB that has both a USB and serial port. OS: openSUSE 20151209 (x86_64) VERSION = 20151209 CODENAME = Tumbleweed Kernel: 4.2.1-1-desktop Nut: nut-2.7.3-1.5.x86_64 installed with zypper dmesg |grep usb [94414.680765] usb 1-1.1: new low-speed USB device number 4

Have anybody expirience with Ippon Smart Winner 750/1000/1500/2000/3000 with serial interface ? I have tryed megatec and blazer_ser drivers with no success: [IPPON] driver = megatec port = /dev/ttyd0 desc = "IPPON smart winner 1500VA" model = "Smart Winner 750/1000/1500/2000/3000" # ./megatec -a IPPON -DDD Network UPS Tools - Megatec

Hello First things first, thanks for great work with NUT. For years I used Informer compact 3kVA UPS http://www.informups.com/informer_compact.html with nut/megatec serial driver, but it stopped working when I switched to blazer_ser with 2.6.0 upgrade. I'm using 2.6.0 on gentoo. Blazer_ser seems to connect with UPS, but upsmon reports driver not connected. uname -a Linux localhost

Hello, i've a problem, this is my configuration: - Atlantis Land UPS with serial port - a generic RS232 to USB cable adapter (QinHeng Electronics HL-340 USB-Serial adapter for linux). The problem is in the syslog file where i find: [...] Aug 19 09:07:25 ProLiant megatec[1126]: Communications with UPS lost: No status from UPS. Aug 19 09:07:26 ProLiant megatec[1126]: Communications with UPS

Hi, I have a bunch of UPSs, most connected to pcs with Linux working 100% with NUT. The only one I have a problem with, is connected to Windows 7 64bit, and I used the straight MSI installed from the website named NUT-Installer-2.6.5-4.msi Took me a while to find a way to get it to work, but it is ugly for now. Just starting up the service results in a NUT not working at all, and I tracked it

Hello, I have just installed nut_2.6.0 from Debian testing, do anyone know the correct driver for this ups? The blazer_usb don't report battery-charge, the bundled software report charge and runtime. root at pluto<~>upsc powerwalker battery.voltage: 40.86 battery.voltage.nominal: 36.0 beeper.status: enabled device.mfr: device.model: HV 1K device.type: ups driver.name: blazer_usb

2010/3/14 IT Department ULQS <it at quality.ua>: > > I try send this email to 'carlos.efr at mail.telepac.pt' but: > Fri 2010-03-12 19:26:13: <-- 550-The account has been suspended > Fri 2010-03-12 19:26:13: <-- 550 A conta do destinatario encontra-se > suspensa (#5.1.1) right, Carlos is retired from the NUT team. moreover the megatec and megatec_usb driver are

Hello, I have two SMS PowerVision PV2200 BIFX, that came with a serial port, I used a serial - usb conversor to conect it to my pc it recognized as: lsusb -s 001:005 -vvv Bus 001 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at

Hello! I use online UPS MV-1000 LT http://www.230v.ru/catalogue/?id=production/ups-sm/master-vision for the power of my Linux server SLES 10 SP1. I downloaded, compiled and configured diver nut 2.4.1 from this link http://www.networkupstools.org/source/2.4/nut-2.4.1.tar.gz Here are my configuration files: --- srv:/usr/local/ups # cat etc/ups.conf [npower] driver = megatec port = /dev/ttyS0

Hello, I am new to UPS stuff, please be patient with me ;-) Archlinux i686, kernel 3.0-ARCH #1 SMP PREEMPT. nut 2.6.1 installed from source via Arch's AUR repository. Mother board GA D525TUD with two serial ports, both enabled in BIOS. I got some old Orvaldi 520 PL UPS [1], which is supposed to be supported by the vendor [2] with sw called UPSmart. The statically compiled i386 binary ran

Hi, I have been blessed with the "Numeric 2000 Plus" UPS, suspected to be of 2KVA rating. This UPS does not figure in the list of UPS recognised by NUT. However I get lucky with megatec driver. Here is the log... ----------------------------------------------------------------------------------------------------- Network UPS Tools - Megatec protocol driver 1.5 (2.0.5) Carlos Rodrigues

No progress has been made: cable is UPS - PC 6 - 3 7 - 5 9 - 2 for ./blazer_ser -DDDDD -a infosec 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyS1" 0.000323 debug level is '5' 0.103068 send_to_all: SETINFO device.type "ups" 0.103104 send_to_all: SETINFO driver.version "2.7.3" 0.103118 send_to_all: SETINFO

Hi, I get a trouble using nut with PowerMan Back Pro N 1400 Plus ~# /lib/nut/megatec -DDDDD -a pman Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) send_to_all: SETINFO driver.parameter.port "/dev/ttyS0" debug level is '5' DTR=1, RTS=0 Starting UPS detection process... Asking for UPS information [I]... I => OK [# PCSTAR-PRO V1.02-2411] I VALUES => [

On Thu, 26 Feb 2015 13:42:57 -0600, Ashley M. Kirchner <ashley at pcraft.com> wrote: > And after picking this back up this morning .... still no dice. I have > now > blacklisted the one module that would enumerate the add-in ethernet port > so > that is no longer an issue during the kickstart process, however the > following is now happening: > > - kickstart

I am have a nice result whith blazer_ser driver! respect! # ./nut start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.4.1) Supported UPS detected with megatec protocol Vendor information read in 1 tries Battery runtime will not be calculated (runtimecal not set) <================= !!! Starting nut. Network UPS Tools upsd 2.4.1

Hello list, first of all, I'd like to report that my UPS N-Power MEV-3000LT (http://www.380v.ru/catalogue/micro-ups/mega-vision , in Russian), which is not in the hardware compatibility list, is mostly supported by the blazer_ser driver. I have very strong grounds to believe that this (and other) N-Power UPS'es are rebranded for Russian and Italian markets from their counterparts

Hi, I would like to report that Tuncmatik Newtech Pro 1 KVA (http://www.tuncmatik.com/en-US/productDetail.asp?RecID=290) works with nut(2.4.1) blazer_usb, blazer_ser and megatec drivers. The UPS came with an usb cable and a java based software for both linux and windows, named ViewPower (http://www-power-software-download.com). This UPS has double interface a USB interface and a serial

On Mar 12, 2015, at 11:52 AM, Jason Warr <jason at warr.net> wrote: > > On Thu, 12 Mar 2015 12:43:27 -0500, Robert Moskowitz <rgm at htt-consult.com> wrote: > >> I found: >> >> http://www.cyberciti.biz/tips/configuring-static-routes-in-debian-or-red-hat-linux-systems.html >> >> where it says to add to ifcfg-eth0: >> >>

Dear Daniele, I have some news regarding the Driver: I applied the patch you sent me (https://github.com/zykh/nut/tree/issue-441) and it works correctly (obviously in Level 5 of Debug I see "missing CR...etc.."). As for now there are 2 modification I'd like to suggest you: - For Online Type UPSs the Megatec protocol describes that the battery voltage is provided in the form of V