Nut upsuser - Feb 2011 - Ippon Smart Winner 750/1000/1500/2000/3000

Have anybody expirience with

Ippon Smart Winner 750/1000/1500/2000/3000

with serial interface ?

I have tryed megatec and blazer_ser drivers with no success:


[IPPON]
        driver = megatec
        port = /dev/ttyd0
        desc = "IPPON smart winner 1500VA"
        model = "Smart Winner 750/1000/1500/2000/3000"


# ./megatec -a IPPON -DDD
Network UPS Tools - Megatec protocol driver 1.6 (2.4.1)
debug level is '3'
DTR=1, RTS=0
Starting UPS detection process...
Asking for UPS information [I]...
I => FAILED [timeout]
Asking for UPS status [Q1]...
Q1 => FAILED [timeout]
Asking for UPS status [Q1]...
Q1 => FAILED [timeout]
Asking for UPS status [Q1]...
Q1 => FAILED [timeout]
Asking for UPS status [Q1]...
Q1 => FAILED [timeout]
Asking for UPS status [Q1]...
Q1 => FAILED [timeout]
5 out of 5 detection attempts failed (minimum failures: 2).
Megatec protocol UPS not detected.

FreeBSD irkutsk-gate 7.2-RELEASE-p8 FreeBSD 7.2-RELEASE-p8 #0: Tue May 25
17:51:43 UTC 2010     root at
amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  amd64

I have tryed to use both /dev/ttyd0 and /dev/cuad0 devices.

????????? ?????:
> Have anybody expirience with
>
> Ippon Smart Winner 750/1000/1500/2000/3000
>
> with serial interface ?
>
> I have tryed megatec and blazer_ser drivers with no success:
>
>
> [IPPON]
> driver = megatec
> port = /dev/ttyd0
> desc = "IPPON smart winner 1500VA"
> model = "Smart Winner 750/1000/1500/2000/3000"
>
>
> # ./megatec -a IPPON -DDD
> Network UPS Tools - Megatec protocol driver 1.6 (2.4.1)
> debug level is '3'
> DTR=1, RTS=0
> Starting UPS detection process...
> Asking for UPS information [I]...
> I => FAILED [timeout]
> Asking for UPS status [Q1]...
> Q1 => FAILED [timeout]
> Asking for UPS status [Q1]...
> Q1 => FAILED [timeout]
> Asking for UPS status [Q1]...
> Q1 => FAILED [timeout]
> Asking for UPS status [Q1]...
> Q1 => FAILED [timeout]
> Asking for UPS status [Q1]...
> Q1 => FAILED [timeout]
> 5 out of 5 detection attempts failed (minimum failures: 2).
> Megatec protocol UPS not detected.
>
> FreeBSD irkutsk-gate 7.2-RELEASE-p8 FreeBSD 7.2-RELEASE-p8 #0: Tue May 
> 25 17:51:43 UTC 2010 
> root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>
> I have tryed to use both /dev/ttyd0 and /dev/cuad0 devices.
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Thank you for support, the problem is solved. Wrong cable.
Now it's working with megatec driver and settings:

[IPPON]
driver = megatec
port = /dev/ttyd0
desc = "IPPON Smart Winner 1500VA"
battvolts = 53:39
mfr = "Ippon"
model = "Smart Winner"

On Feb 17, 2011, at 7:34 AM, ????????? ????????? wrote:
> Thank you for support, the problem is solved. Wrong cable.
What kind of cable is required? Is it straight through, or does it  
have a strange pinout? (We collect the pinouts of non-standard cables  
for the NUT documentation.)

Charles Lepple ?????:
> On Feb 17, 2011, at 7:34 AM, ????????? ????????? wrote:
>
>> Thank you for support, the problem is solved. Wrong cable.
>
> What kind of cable is required? Is it straight through, or does it 
> have a strange pinout? (We collect the pinouts of non-standard cables 
> for the NUT documentation.)
I do not know. Installation was made remotely. In package with UPS was 
two serial cables, and local staff install wrong type