Arjen de Korte ha scritto:> Citeren Nick Warr <nick at mobilia.it>: > >>> How is the driver failing? >> It says there's no Megatec protocol UPS on that port more or less. > > Could you run the driver in debug mode and post the (gzip'ed) logs as > an attachment? > > /path/to/megatec -DDD -a upsname > > The upsname should be the name as configured in ups.conf. Please make > sure you run the *driver* in debug mode, not upsdrvctl (that won't > help us). > > Also note that you're using a fairly old version of NUT. The megatec > driver contained in nut-2.2.0 has limited debugging facilities, so > you'd probably better off upgrading to nut-2.4.1. This would also give > you the blazer_ser driver, which is an improved successor of the > megatec driver. > > Best regards, ArjenWith the 2505 cable... Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec] Carlos Rodrigues (c) 2003-2007 debug level is '3' Starting UPS detection process... Attempting to detect the UPS... Sending "Q1" command... Wrong answer to "Q1" command. Attempting to detect the UPS... Sending "Q1" command... Wrong answer to "Q1" command. Attempting to detect the UPS... Sending "Q1" command... Wrong answer to "Q1" command. Attempting to detect the UPS... Sending "Q1" command... Wrong answer to "Q1" command. Attempting to detect the UPS... Sending "Q1" command... Wrong answer to "Q1" command. 5 out of 5 detection attempts failed (minimum failures: 2). Megatec protocol UPS not detected. Hmm, I may have to compile it, I'll see what I'm able to do this morning, in the end, I ended up buying the megatec SNMP card, so before I deploy that I'll try and do some testing. It will be nice to have a backup.
Arjen de Korte
2009-Nov-16 12:24 UTC
[Nut-upsuser] [Fwd: Re: Can anyone give me some ideas?]
Citeren Nick Warr <nick op mobilia.it>: [...]> Attempting to detect the UPS... > Sending "Q1" command... > Wrong answer to "Q1" command. > 5 out of 5 detection attempts failed (minimum failures: 2). > Megatec protocol UPS not detected.I was already afraid that we would get this result. We need a more recent version of the megatec driver or (even better) the blazer_ser driver. Best regards, Arjen -- Please keep list traffic on the list