similar to: dahdi-2.2.1 & kernel-2.6.32: working for anyone?

I updated Asterisk to 1.6.2.7 and now the user introduction in the meetme application is no longer working: [May 27 09:26:51] WARNING[2407]: channel.c:4034 ast_request: No channel type registered for 'DAHDI' -- Created MeetMe conference 1023 for conference '800' [May 27 09:26:51] WARNING[2407]: app_meetme.c:3640 find_conf: No DAHDI channel available for conference, user

Hello I was editing files manually, and noticed that if I include the familiar "fxsks=1" in /etc/dahdi/system.conf, Dahdi fails loading: ===================== # cat /etc/dahdi/system.conf loadzone = fr defaultzone = fr fxsks=1 ===================== # /etc/init.d/dahdi start Loading DAHDI hardware modules: wctdm: [ OK ] /usr/share/dahdi/waitfor_xpds: Missing

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1]

Aloha, I'm not sure why I'm getting this error, but I can't seem to get chan_dahdi to load. SIP & IAX2 are working fine. Debian 4 w/ 2.6.28 kernel. Asterisk 1.6.1.5, dahdi-linux 2.2.0.2, dahdi-tools-2.2.0 CLI> module load chan_dahdi.so Unable to load module chan_dahdi.so Command 'module load chan_dahdi.so' failed. [Sep 1 10:57:51] WARNING[31696]: pbx.c:4550

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! Days ago I bought a OpenVox A400P card with a port FXS and another FXO that I am testing with my Asterisk installation in my house. I'm using Asterisk 1.4.24.1 with DAHDI Linux 2.1.0.4 and DAHDI Tools 2.1.0.2 on Debian GNU/Linux Lenny. I was reading "The future of telephony" and this [1] document looking for information about

Hello all, Ok it is Sunday afternoon and I am going crazy. I have been running in circles so long that I can't think straight. As an example, I sent this message to the wrong address the first try, AAARRRRGGGGGGHHHHH. I have Asterisk 1.6.0.6 and DAHDI Tools Version - 2.1.0.2, DAHDI Version: 2.1.0.4, OpenSuSE 10.3 x86_64, tdm422 at the end of installing dahdi-linux and dahdi-tools I get:

Hello I'm trying to install Dahdi through source code on a Fedora 13 host to use an OpenVox PCI card with a single FXO port, but dahdi_cfg -vv isn't happy. 1. After successfully running "make all; make install; make config", I edited /etc/dahdi/system.conf thusly: loadzone=fr defaultzone=fr fxsks=1 2. Then ran "dahdi_cfg -vv" which says: ------------- DAHDI Tools

As best i could figure it out, I've installed dahdi and rc4. My TDM400P doesn't answer fxo or fxs. /etc/dahdi/system.conf: loadzone = us defaultzone=us fxoks=1,2 fxsks=4 /etc/asterisk/chan_dahdi.conf: [house-phones] context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel dahdichan => 1 ;

I am having trouble with chan_zap.so not loading. When I load it from modules.conf, Asterisk bails out without any error message. When I load it from the console, it just says "Unable to load module chan_zap.so" no matter what verbose level I am using. dmesg says: Zaptel Version: 1.4.4 Zaptel Echo Canceller: MG2 Freshmaker version: 73 Freshmaker passed register test Module 0:

Hi, I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error (EB113 on the display) I am learning linux and asterisk as I go along, there might be obvious things I should know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no

Hi, I need to run ztdummy for Paging, but now that this is all become dahdi I don`t really know where to start. I did build dahdi before building asterisk, but that`s it. I find it hard to find any documentation referring to dadhi instead of zaptel. I have no Digium hardware, but I still need the ztdummy timer (or whatever it`s called now). How do I get myself going? Regards,

Hello, I need help to install a digium card TC400P. I compiled the dahdi source, but dahdi don?t find the card! debian:/usr/src/dahdi-linux-complete-2.2.0.2+2.2.0# lspci 11:03.0 Ethernet controller: Digium, Inc. Wildcard TC400P transcoder base card (rev 11) debian:/usr/src/dahdi-linux-complete-2.2.0.2+2.2.0# /etc/init.d/dahdi restart Unloading DAHDI hardware modules:

I just installed an FXS module onto a 4 channel tdm thats about 5 years old and it wont work. Running dmesg I can see the following error: Zapata Telephony Interface Registered on major 196 Freshmaker version: 71 Freshmaker passed register test !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should

I installed the TDM400P and installed it on a system running on Fedora Core1, please refer to the steps below. I connected an analogue phone to the FXS port. When I pick up the speaker I don't hear the dialtone although when I press a number key I hear a DTMF generated. What could be the problem? I appreciate your help 1- First I installed the TDM400P in the PCI slot and connected

Looking for some help from the UK please. I backed up all my Asterisk configuration before re-installing the server from 32 -> 64 bit. Unfortunately I did not transfer the backup to another machine!!!!! I now have a TDM400P that is not picking up the line. Can you see what I have done wrong when I have rebuilt the config please: dahdi_scan ---------- [1] active=yes alarms=OK

I have read thru what other users have tried in this list when they have experienced seemingly similar issues to what I have, without success. I suspect there might be an issue regarding both the X100P and TDM04b cards being used in an Intel SE7525GP2 motherboard, as I had to even wait for a BIOS update from Intel in order to utilize my 3ware 9500 SATA raid controller on it (3ware Kb -->

Hi all! I'm new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. I'm following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded [root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" netjet 14618 0 isdnhdlc 4523 1 netjet mISDNipac

Hello there: I think I have a silly kernel configuration problem. I'm running: * vanilla 2.6.27.10 kernel built from source * dahdi-2.1.0.4 built from source So far so good, dahdi module loads just fine: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.4 when I try to: hal04 dahdi # modprobe dahdi_dummy FATAL: Error inserting dahdi_dummy

From asterisk -cvvvvv == Parsing '/etc/asterisk/chan_dahdi.conf': == Found == Parsing '/etc/asterisk/users.conf': == Found -- Automatically generated pseudo channel [Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi: Ignoring any changes to 'userbase' (on reload) at line 23. [Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi:

Hi to all. I'm trying to use meetme on asterisk 1.4.22.1. On a debian i've compiled (as i need h323 support) openh323_v1_18_0 pwlib_v1_10_0 dahdi-linux-2.1.0.3 dahdi-tools-2.1.0.2 asterisk-1.4.22.1 All works fine, dahdi status is: asterik:/data/programmi# /etc/init.d/dahdi status ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER) asterik:/data/programmi#