sean darcy
2010-Mar-07 03:18 UTC
[asterisk-users] dahdi-2.2.1 & kernel-2.6.32: working for anyone?
I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and installed dahdi-2.2.1. kernel modules loaded. lsmod | grep wctdm wctdm 37233 0 dahdi 194985 1 wctdm lsmod | grep dahdi dahdi 194985 1 wctdm crc_ccitt 1549 2 dahdi,isdnhdlc dmesg: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.1 ..... dahdi_dummy: Trying to load High Resolution Timer dahdi_dummy: Initialized High Resolution Timer dahdi_dummy: Starting High Resolution Timer dahdi_dummy: High Resolution Timer started, good to go which is much less dmesg on 2.6.31: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.1 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 wctdm 0000:01:05.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 Freshmaker version: 73 Freshmaker passed register test Module 0: Installed -- AUTO FXS/DPO Module 1: Installed -- AUTO FXS/DPO Module 2: Not installed Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) and dahdi_cfg fails: dahdi_cfg -vvvvvv DAHDI Tools Version - 2.2.1 DAHDI Version: 2.2.1 Echo Canceller(s): Configuration ===================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) 3 channels to configure. DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) I tried dahdi svn r8255 from today. Same result. If I reboot with 2.6.31, all's well. Am I missing something? sean
Anthony Messina
2010-Mar-07 03:46 UTC
[asterisk-users] dahdi-2.2.1 & kernel-2.6.32: working for anyone?
On Saturday 06 March 2010 09:18:13 pm sean darcy wrote:> I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and > installed dahdi-2.2.1. > > kernel modules loaded. > lsmod | grep wctdm > wctdm 37233 0 > dahdi 194985 1 wctdm > > lsmod | grep dahdi > dahdi 194985 1 wctdm > crc_ccitt 1549 2 dahdi,isdnhdlc > > dmesg: > > dahdi: Telephony Interface Registered on major 196 > dahdi: Version: 2.2.1 > ..... > dahdi_dummy: Trying to load High Resolution Timer > dahdi_dummy: Initialized High Resolution Timer > dahdi_dummy: Starting High Resolution Timer > dahdi_dummy: High Resolution Timer started, good to go > > which is much less dmesg on 2.6.31: > > dahdi: Telephony Interface Registered on major 196 > dahdi: Version: 2.2.1 > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > wctdm 0000:01:05.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ > 16 Freshmaker version: 73 > Freshmaker passed register test > Module 0: Installed -- AUTO FXS/DPO > Module 1: Installed -- AUTO FXS/DPO > Module 2: Not installed > Module 3: Installed -- AUTO FXO (FCC mode) > Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) > > and dahdi_cfg fails: > > dahdi_cfg -vvvvvv > DAHDI Tools Version - 2.2.1 > > DAHDI Version: 2.2.1 > Echo Canceller(s): > Configuration > =====================> > > Channel map: > > Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) > Channel 02: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) > Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) > > 3 channels to configure. > > DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) > > I tried dahdi svn r8255 from today. Same result. > > If I reboot with 2.6.31, all's well. > > Am I missing something?Amazing, I just finished the same thing with, unfortunately, the same result as you on both i686 and x86_64. I'll keep googling :) -- Anthony - http://messinet.com - http://messinet.com/~amessina/gallery 8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC B001 4A4E -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part. Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20100306/d68efa4f/attachment.pgp
Tzafrir Cohen
2010-Mar-07 05:14 UTC
[asterisk-users] dahdi-2.2.1 & kernel-2.6.32: working for anyone?
On Sat, Mar 06, 2010 at 10:18:13PM -0500, sean darcy wrote:> I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and > installed dahdi-2.2.1. > > kernel modules loaded. > lsmod | grep wctdm > wctdm 37233 0 > dahdi 194985 1 wctdm > > lsmod | grep dahdi > dahdi 194985 1 wctdm > crc_ccitt 1549 2 dahdi,isdnhdlc > > dmesg: > > dahdi: Telephony Interface Registered on major 196 > dahdi: Version: 2.2.1 > ..... > dahdi_dummy: Trying to load High Resolution Timer > dahdi_dummy: Initialized High Resolution Timer > dahdi_dummy: Starting High Resolution Timer > dahdi_dummy: High Resolution Timer started, good to goAre you sure wctdm was loaded? What happens if you manually rmmod it and modprobe it back?> > which is much less dmesg on 2.6.31: > > dahdi: Telephony Interface Registered on major 196 > dahdi: Version: 2.2.1 > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > wctdm 0000:01:05.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 > Freshmaker version: 73 > Freshmaker passed register test > Module 0: Installed -- AUTO FXS/DPO > Module 1: Installed -- AUTO FXS/DPO > Module 2: Not installed > Module 3: Installed -- AUTO FXO (FCC mode) > Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules)-- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
hi I have problelm with an asterisk 1.6.2.5 tarbal compiled on CentOS 5.4 and try to change tones in indications.conf but any setting i have made has no effect. the tones are by default U.S. and i need to change to hungarian or greece
Nobody?? The problem is only in asterisk 1.6.2.X in asterisk 1.6.0.x is working ??? -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of ciprian at carsenie.ro Sent: Sunday, March 07, 2010 9:39 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] indications.conf hi I have problelm with an asterisk 1.6.2.5 tarbal compiled on CentOS 5.4 and try to change tones in indications.conf but any setting i have made has no effect. the tones are by default U.S. and i need to change to hungarian or greece -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 6840 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20100307/f9b6def5/attachment.bin
Nobody?? The problem is only in asterisk 1.6.2.X in asterisk 1.6.0.x is working ??? -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of ciprian at carsenie.ro Sent: Sunday, March 07, 2010 9:39 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] indications.conf hi I have problelm with an asterisk 1.6.2.5 tarbal compiled on CentOS 5.4 and try to change tones in indications.conf but any setting i have made has no effect. the tones are by default U.S. and i need to change to hungarian or greece -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 6840 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20100307/8479a4c7/attachment.bin